One dust collector Harbor Freight sold got really good reviews, but
apparently they don't sell it any longer. Does anyone know if they simply
gave the same machine a new number, or if they made significant changes?
http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=97869
Also, has anyone ever used the 5-gallon bucket dust separator? It is, of
course, never going to be as good as a full cyclone, but is it worth the $8
they want?
Puckdropper
--
On Usenet, no one can hear you laugh. That's a good thing, though, as some
writers are incorrigible.
To email me directly, send a message to puckdropper (at) fastmail.fm
Steve Turner <[email protected]> wrote in
news:[email protected]:
> Puckdropper wrote:
>> I've been sold on the cyclone idea for a long time
>
> As have I, and thanks to a prior thread where it was noted that
> Grizzly is currently offering free shipping on selected items, I
> finally took the plunge and had one of these delivered:
>
> http://www.grizzly.com/products/2-HP-Cyclone-Dust-Collector/G0440
>
> Haven't installed any ducting yet, but so far so good. A very nice
> machine.
>
You'll have to let me know how that works out for you. The feedback I
read on the Internet was about 50% positive, which is too low for
something that runs as much as that one does.
Puckdropper
--
On Usenet, no one can hear you laugh. That's a good thing, though, as
some writers are incorrigible.
To email me directly, send a message to puckdropper (at) fastmail.fm
"C & E" <[email protected]> wrote in
news:[email protected]:
>
> "Puckdropper" <puckdropper(at)yahoo(dot)com> wrote in message
> news:[email protected]...
>> One dust collector Harbor Freight sold got really good reviews, but
>> apparently they don't sell it any longer. Does anyone know if they
>> simply gave the same machine a new number, or if they made
>> significant changes?
>>
>> http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=97869
>>
>> Also, has anyone ever used the 5-gallon bucket dust separator? It
>> is, of course, never going to be as good as a full cyclone, but is it
>> worth the $8 they want?
>>
>> Puckdropper
>> --
>
> I believe that using a 30 gallon garbage can will be most effective
> and that you can make an effective lid (I've seen them on the web) but
> be sure to gasket the lid-to-can interface. I used a steel barrel
> (about 30 gal) and plumbed PVC fittings into the lid in a manner that
> the incoming dust strikes the side of the barrel and follows the
> ouside curve thus, slowing the air and allowing better drop out of
> solids. Now, my bottom bag get very little dust. You might also
> search the Thien baffle which is getting great reviews on the WW
> sites. Mine is working sufficiently well for the time being but if I
> was just starting I'd seriously consider this one!
>
The Thien baffle looks like a cheap and easy way to improve a DC's
efficiency. Thanks.
Stopped by HF today, and they didn't have any of the 2 hp DC's in stock.
I got a rain check, so if they don't get any until the sale ends, I can
still get it for the sale price.
Puckdropper
--
On Usenet, no one can hear you laugh. That's a good thing, though, as
some writers are incorrigible.
To email me directly, send a message to puckdropper (at) fastmail.fm
"Steve Turner" wrote
> Puckdropper wrote:
>> I've been sold on the cyclone idea for a long time
>
> As have I, and thanks to a prior thread where it was noted that Grizzly is
> currently offering free shipping on selected items, I finally took the
> plunge and had one of these delivered:
>
> http://www.grizzly.com/products/2-HP-Cyclone-Dust-Collector/G0440
>
> Haven't installed any ducting yet, but so far so good. A very nice
> machine.
>
> --
That ought to do the trick. Two questions. Do you have high enough ceiling
for that to go under? Did you get the noise reduction (muffler) kit?
Morris Dovey <[email protected]> wrote in
news:[email protected]:
> Puckdropper wrote:
>> One dust collector Harbor Freight sold got really good reviews, but
>> apparently they don't sell it any longer. Does anyone know if they
>> simply gave the same machine a new number, or if they made
>> significant changes?
>>
>> http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=97869
>>
>> Also, has anyone ever used the 5-gallon bucket dust separator? It
>> is, of course, never going to be as good as a full cyclone, but is it
>> worth the $8 they want?
>
> Except for the bottom bag it looks just like the one I bought about
> six years ago (on sale for $150). I use mine with two 55 gal drums
> with Lee Valley separator lids and have been happy.
>
> I don't know about the 5 gal separator, but this shop-built lash-up
> works well:
>
> http://www.iedu.com/DeSoto/Projects/MiniCyclone/
>
Maybe they improved it a little bit. (Or probably found a cheaper
supplier for the bottom bag.)
The MiniCyclone idea looks interesting. An hour or so of playing around
in the shop could easily yield a completed project. (The truely frugal
woodworker only needs 7" of 2x4, too!)
Puckdropper
--
On Usenet, no one can hear you laugh. That's a good thing, though, as
some writers are incorrigible.
To email me directly, send a message to puckdropper (at) fastmail.fm
Dan <[email protected]> wrote in
news:[email protected]:
> On Tue 17 Feb 2009 03:48:05p, Puckdropper
> <puckdropper(at)yahoo(dot)com> wrote in
> news:[email protected]:
>
>> One dust collector Harbor Freight sold got really good reviews, but
>> apparently they don't sell it any longer. Does anyone know if they
>> simply gave the same machine a new number, or if they made
>> significant changes?
>>
>> http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=97869
>>
>> Also, has anyone ever used the 5-gallon bucket dust separator? It
>> is, of course, never going to be as good as a full cyclone, but is it
>> worth the $8 they want?
>>
>> Puckdropper
>
> Like Morris said, that looks like the one I bought except for the
> bottom bag. I use a trash can separator with it.
>
> I bought the five gallon separator when all I had was a shop vac. It
> filled up pretty fast. I haven't used it since I put the shop vac
> inside a muffler box.
Well, the trash can separator looks like it'll work a little more
smoothly with the DC. Plus it looks like less maintenance.
I've just got to ask though... How big of grounding wire do I need for
the metal trash can? Is #12 going to be big enough, or should I take
apart a pair or jumper cables? (Do I need to drive a new grounding rod,
too?) :-)
Puckdropper
--
On Usenet, no one can hear you laugh. That's a good thing, though, as
some writers are incorrigible.
To email me directly, send a message to puckdropper (at) fastmail.fm
"Dr. Deb" <[email protected]> wrote in
news:[email protected]:
>
> I just got a flier in the mail with it advertised. Been using mine
> for several years, but made a few adjustments. I pulled the impeller
> off and used it to power a cyclone, venting the dust outside the
> building. Do not have the problem with losing cfm through the filter
> bag and get the dust away from the shop.
>
> Deb
Thanks Deb, I've been trying to find out when it's going on sale.
I've been sold on the cyclone idea for a long time, so I'll have to see
about either building or buying one.
Puckdropper
--
On Usenet, no one can hear you laugh. That's a good thing, though, as
some writers are incorrigible.
To email me directly, send a message to puckdropper (at) fastmail.fm
Puckdropper wrote:
> One dust collector Harbor Freight sold got really good reviews, but
> apparently they don't sell it any longer. Does anyone know if they simply
> gave the same machine a new number, or if they made significant changes?
>
> http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=97869
>
> Also, has anyone ever used the 5-gallon bucket dust separator? It is, of
> course, never going to be as good as a full cyclone, but is it worth the $8
> they want?
Except for the bottom bag it looks just like the one I bought about six
years ago (on sale for $150). I use mine with two 55 gal drums with Lee
Valley separator lids and have been happy.
I don't know about the 5 gal separator, but this shop-built lash-up
works well:
http://www.iedu.com/DeSoto/Projects/MiniCyclone/
--
Morris Dovey
DeSoto Solar
DeSoto, Iowa USA
http://www.iedu.com/DeSoto/
Puckdropper wrote:
> The MiniCyclone idea looks interesting. An hour or so of playing around
> in the shop could easily yield a completed project. (The truely frugal
> woodworker only needs 7" of 2x4, too!)
OTOH, 21.625" of 2x4 cutoff is enough to take care of yourself /and/
have a second set to give away.
The guy who carried my second set away called back a year later to order
solar heating panels...
...and come to think of it, I /do/ still have some 2x4 cutoffs. Hmmm.
Thank you! :)
--
Morris Dovey
DeSoto Solar
DeSoto, Iowa USA
http://www.iedu.com/DeSoto/
"Puckdropper" <puckdropper(at)yahoo(dot)com> wrote in message
news:[email protected]...
> One dust collector Harbor Freight sold got really good reviews, but
> apparently they don't sell it any longer. Does anyone know if they simply
> gave the same machine a new number, or if they made significant changes?
>
> http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=97869
>
> Also, has anyone ever used the 5-gallon bucket dust separator? It is, of
> course, never going to be as good as a full cyclone, but is it worth the
> $8 they want?
>
> Puckdropper
> --
I believe that using a 30 gallon garbage can will be most effective and that
you can make an effective lid (I've seen them on the web) but be sure to
gasket the lid-to-can interface. I used a steel barrel (about 30 gal) and
plumbed PVC fittings into the lid in a manner that the incoming dust strikes
the side of the barrel and follows the ouside curve thus, slowing the air
and allowing better drop out of solids. Now, my bottom bag get very little
dust. You might also search the Thien baffle which is getting great reviews
on the WW sites. Mine is working sufficiently well for the time being but
if I was just starting I'd seriously consider this one!
"Puckdropper" <puckdropper(at)yahoo(dot)com> wrote in message
news:[email protected]...
> One dust collector Harbor Freight sold got really good reviews, but
> apparently they don't sell it any longer. Does anyone know if they simply
> gave the same machine a new number, or if they made significant changes?
>
> http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=97869
>
> Also, has anyone ever used the 5-gallon bucket dust separator? It is, of
> course, never going to be as good as a full cyclone, but is it worth the
> $8
> they want?
>
> Puckdropper
> --
> On Usenet, no one can hear you laugh. That's a good thing, though, as
> some
> writers are incorrigible.
>
> To email me directly, send a message to puckdropper (at) fastmail.fm
I just got the 5 gal. bucket top. I haven't had a chance to hook it up yet.
As soon as I do, and use it some, I'll give a mini review. I wonder about
emptying the bucket... 5 gal. just isn't a whole lot of wood dust/chips.
We'll see.
I think the $20 trashcan lid would be more useful. And, I even wonder if my
orig. idea of 2 hose fittings mounted on either the top or sides of a 20
gal. trashcan would be even more cost effective.
I will say this, the shop-vac set up I put in, works (much) better than I
thought it would.
Ed
On Feb 18, 8:18=A0am, "Lee Michaels" <leemichaels*[email protected]>
wrote:
> "Steve Turner" =A0wrote
>
> > Puckdropper wrote:
> >> I've been sold on the cyclone idea for a long time
>
> > As have I, and thanks to a prior thread where it was noted that Grizzly=
is
> > currently offering free shipping on selected items, I finally took the
> > plunge and had one of these delivered:
>
> >http://www.grizzly.com/products/2-HP-Cyclone-Dust-Collector/G0440
>
> > Haven't installed any ducting yet, but so far so good. =A0A very nice
> > machine.
>
> > --
>
> That ought to do the trick. =A0Two questions. =A0Do you have high enough =
ceiling
> for that to go under? =A0Did you get the noise reduction (muffler) kit?
I'm still looking into this source.
http://www.cycloneseparator.com/index2.html
Anybody here have any experience with this product/company?
Puckdropper <puckdropper(at)yahoo(dot)com> wrote:
> One dust collector Harbor Freight sold got really good reviews, but
> apparently they don't sell it any longer. Does anyone know if they simply
> gave the same machine a new number, or if they made significant changes?
>
> http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=97869
>
> Also, has anyone ever used the 5-gallon bucket dust separator? It is, of
> course, never going to be as good as a full cyclone, but is it worth the
> $8 they want?
>
> Puckdropper
I just got a flier in the mail with it advertised. Been using mine for
several years, but made a few adjustments. I pulled the impeller off and
used it to power a cyclone, venting the dust outside the building. Do not
have the problem with losing cfm through the filter bag and get the dust
away from the shop.
Deb
Puckdropper wrote:
> I've been sold on the cyclone idea for a long time
As have I, and thanks to a prior thread where it was noted that Grizzly
is currently offering free shipping on selected items, I finally took
the plunge and had one of these delivered:
http://www.grizzly.com/products/2-HP-Cyclone-Dust-Collector/G0440
Haven't installed any ducting yet, but so far so good. A very nice machine.
--
See Nad. See Nad go. Go Nad!
To reply, eat the taco.
http://www.flickr.com/photos/bbqboyee/
Lee Michaels wrote:
> "Steve Turner" wrote
>
>> Puckdropper wrote:
>>> I've been sold on the cyclone idea for a long time
>> As have I, and thanks to a prior thread where it was noted that Grizzly is
>> currently offering free shipping on selected items, I finally took the
>> plunge and had one of these delivered:
>>
>> http://www.grizzly.com/products/2-HP-Cyclone-Dust-Collector/G0440
>>
>> Haven't installed any ducting yet, but so far so good. A very nice
>> machine.
>>
>> --
> That ought to do the trick. Two questions. Do you have high enough ceiling
> for that to go under? Did you get the noise reduction (muffler) kit?
Yes, my gara^h^h^h^h *shop* has 9-foot ceilings so there is plenty of
room, but it will fit under an 8-foot ceiling too. The spec sheet on
that web page mentions that the overall height is 93-1/4". If I
remember I will post a picture of it tonight.
I didn't get the muffler, but I thought about it. I wanted to see just
how loud it was first, and indeed this thing ROARS, but I can't imagine
that little muffler making a world of difference... I'm thinking some
kind of sound isolation box mounted over the motor would probably be
more effective, but I wouldn't want to do anything that would cause the
motor to overheat.
--
For every action there is an equal and opposite criticism.
To reply, eat the taco.
http://www.flickr.com/photos/bbqboyee/
On Tue 17 Feb 2009 03:48:05p, Puckdropper <puckdropper(at)yahoo(dot)com>
wrote in news:[email protected]:
> One dust collector Harbor Freight sold got really good reviews, but
> apparently they don't sell it any longer. Does anyone know if they
> simply gave the same machine a new number, or if they made significant
> changes?
>
> http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=97869
>
> Also, has anyone ever used the 5-gallon bucket dust separator? It is,
> of course, never going to be as good as a full cyclone, but is it
> worth the $8 they want?
>
> Puckdropper
Like Morris said, that looks like the one I bought except for the bottom
bag. I use a trash can separator with it.
I bought the five gallon separator when all I had was a shop vac. It filled
up pretty fast. I haven't used it since I put the shop vac inside a muffler
box.
On Wed 18 Feb 2009 02:31:57a, "Lee Michaels"
<leemichaels*nadaspam*@comcast.net> wrote in news:008ed092$0$1030$c3e8da3
@news.astraweb.com:
>
> "Puckdropper" wrote
>>
>> I've just got to ask though... How big of grounding wire do I need for
>> the metal trash can? Is #12 going to be big enough, or should I take
>> apart a pair or jumper cables? (Do I need to drive a new grounding rod,
>> too?) :-)
>>
> Don't forget the lightening rod!
>
I've got it isolated by putting it on rubber casters and then never
touching it or going near it.
But now you've got me considering hooking it up to an inverter unit so I
can use the trash can to power the DC.
On 17 Feb 2009 21:48:05 GMT, Puckdropper <puckdropper(at)yahoo(dot)com> wrote:
>One dust collector Harbor Freight sold got really good reviews, but
>apparently they don't sell it any longer. Does anyone know if they simply
>gave the same machine a new number, or if they made significant changes?
>
>http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=97869
>
>Also, has anyone ever used the 5-gallon bucket dust separator? It is, of
>course, never going to be as good as a full cyclone, but is it worth the $8
>they want?
>
>Puckdropper
I'd have to dig out my manual, but other than the plastic bottom bag, it looks
like mine..
I can check on the micron and air flow claims on the old model, if needed..
As to cyclones, I've always heard that the 5 gal. ones were fro shop vacs and
too small for a DC..
Does it have 4" fittings, or 2 1/2"?
mac
Please remove splinters before emailing
On 17 Feb 2009 21:48:05 GMT, Puckdropper
<puckdropper(at)yahoo(dot)com> wrote:
>One dust collector Harbor Freight sold got really good reviews, but
>apparently they don't sell it any longer. Does anyone know if they simply
>gave the same machine a new number, or if they made significant changes?
>
>http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=97869
>
>Also, has anyone ever used the 5-gallon bucket dust separator? It is, of
>course, never going to be as good as a full cyclone, but is it worth the $8
>they want?
>
>Puckdropper
If anything, any pre-DC unit will protect the fan blade. I don't
have this separator, but I do have a trash-cap lid that was shop made.
The accept goes straight up and flares at the bottom. The inlet
makes a sharp turn against the upper trash-cap wall. I probably spent
3 hours to make it, but it does a fine job. The $8 lid for 5-gallon
bucket is better than nothing.
I have a couple of their bucket top separator lids. I stack three buckets
on top each other with holes cut in the base of two so I have a very deep
container. I just wrapped the joints with duct tape. I have three of these
in a row with them in series for more capacity. The first one generally
fills to the top first. When I take it out to empty it, I slide the other
two over and put the newly emptied one in the last position before the
vacuum. It works great. I have tubing going in a ring around the shop to
the wool stations and also a separate set of tubes high and low with holes
drilled in them to pull in the airborn dust.
All that is connected to a wall mounted 6 HP vacuum.
Works great and is cheap.
I give the sawdust chips and shavings to a local scout troop to make fire
starters with. I suspect they have anough to repopulate a small forest at
this point.
"Puckdropper" <puckdropper(at)yahoo(dot)com> wrote in message
news:[email protected]...
> One dust collector Harbor Freight sold got really good reviews, but
> apparently they don't sell it any longer. Does anyone know if they simply
> gave the same machine a new number, or if they made significant changes?
>
> http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=97869
>
> Also, has anyone ever used the 5-gallon bucket dust separator? It is, of
> course, never going to be as good as a full cyclone, but is it worth the
> $8
> they want?
>
> Puckdropper
> --
> On Usenet, no one can hear you laugh. That's a good thing, though, as
> some
> writers are incorrigible.
>
> To email me directly, send a message to puckdropper (at) fastmail.fm