Hi All,
I am planning on upgrading my Delta contractor saw with an
accusquare 50" fence, and while doing so, building a mobile
stand/cabinet under it. I have seen a few plans in the past for these,
each with different features. If you know of plans you like or have
built, I would love to have some recommendations. Or if you have
pictures of one in your shop, please post! Any fodder for the idea
mill is great.
Thanks!
Rob
p.s. Also if you have any positive/negative comments or tips on the
Accusquare fence, let me know! I see they have it at Rockler for $229.
Seems like an OK deal.
On Thu, 27 Nov 2003 03:23:20 -0000, Dan <[email protected]> wrote:
I'm in the process building that modify "little shop mark II" with
Crapsman TS and Mule 50" fence. If you can wait till tomorrow
(daylight) I will post the half completed "little shop mark ll"
>On Tue 25 Nov 2003 09:39:50a, [email protected] (rob) wrote in
>news:[email protected]:
>
>> I am planning on upgrading my Delta contractor saw with an
>> accusquare 50" fence, and while doing so, building a mobile
>> stand/cabinet under it. I have seen a few plans in the past for these,
>> each with different features. If you know of plans you like or have
>> built,
>
>Can we assume you googled the web and the wreck on "little shop mark II"?
>
>I'm planning on building a slightly modified version of that one this
>spring. The garage is too cold for a large project this winter.
>
>Actually it'll be a combination of that and the table saw station in
>ShopNotes #50. I really like that caster setup. Kinda like that one Norm
>used on his, except you step on a lever to lower the casters and slide it
>into a keeper slot to lock them in. You can see the station here:
>http://store.yahoo.com/backissuesstore/sn050.html
>but it doesn't show the casters very well at all.
>
>Dan
-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----
On Wed, 26 Nov 2003 22:04:08 -0700, WD <[email protected]> wrote:
REPOST:
I'm in the process building that modify "little shop mark II" with
Crapsman TS and Mule 50" fence. I will post it in Newsgroups:
alt.binaries.pictures.woodworking tomorrow the half completed "little
shop mark ll"
>>On Tue 25 Nov 2003 09:39:50a, [email protected] (rob) wrote in
>>news:[email protected]:
>>
>>> I am planning on upgrading my Delta contractor saw with an
>>> accusquare 50" fence, and while doing so, building a mobile
>>> stand/cabinet under it. I have seen a few plans in the past for these,
>>> each with different features. If you know of plans you like or have
>>> built,
>>
>>Can we assume you googled the web and the wreck on "little shop mark II"?
>>
>>I'm planning on building a slightly modified version of that one this
>>spring. The garage is too cold for a large project this winter.
>>
>>Actually it'll be a combination of that and the table saw station in
>>ShopNotes #50. I really like that caster setup. Kinda like that one Norm
>>used on his, except you step on a lever to lower the casters and slide it
>>into a keeper slot to lock them in. You can see the station here:
>>http://store.yahoo.com/backissuesstore/sn050.html
>>but it doesn't show the casters very well at all.
>>
>>Dan
>
>
>
>-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
>http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
>-----== Over 100,000 Newsgroups - 19 Different Servers! =-----
-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----
On 25 Nov 2003 07:39:50 -0800, [email protected] (rob) wrote:
Hi, I too have the Accusquare 50" fence, it is cheap and accurate.
Wait till tomorrow daylight I will take a few pictures and post it in
Newsgroups: alt.binaries.pictures.woodworking.
You MUST see it to appreciate the space saving mobile cabinet. It is
still NOT complete.
>Hi All,
> I am planning on upgrading my Delta contractor saw with an
>accusquare 50" fence, and while doing so, building a mobile
>stand/cabinet under it. I have seen a few plans in the past for these,
>each with different features. If you know of plans you like or have
>built, I would love to have some recommendations. Or if you have
>pictures of one in your shop, please post! Any fodder for the idea
>mill is great.
>
>Thanks!
>Rob
>p.s. Also if you have any positive/negative comments or tips on the
>Accusquare fence, let me know! I see they have it at Rockler for $229.
>Seems like an OK deal.
-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----
On Wed, 26 Nov 2003 22:09:35 -0700, WD <[email protected]> wrote:
I have posted the mobile saw cabinet in
alt.binaries.pictures.woodworking.
See my crapy Crapsman. I just love the Accursquare fence.
>I'm in the process building that modify "little shop mark II" with
>Crapsman TS and Mule 50" fence. I will post it in Newsgroups:
>alt.binaries.pictures.woodworking tomorrow the half completed "little
>shop mark ll"
-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----
On Tue 25 Nov 2003 09:39:50a, [email protected] (rob) wrote in
news:[email protected]:
> I am planning on upgrading my Delta contractor saw with an
> accusquare 50" fence, and while doing so, building a mobile
> stand/cabinet under it. I have seen a few plans in the past for these,
> each with different features. If you know of plans you like or have
> built,
Can we assume you googled the web and the wreck on "little shop mark II"?
I'm planning on building a slightly modified version of that one this
spring. The garage is too cold for a large project this winter.
Actually it'll be a combination of that and the table saw station in
ShopNotes #50. I really like that caster setup. Kinda like that one Norm
used on his, except you step on a lever to lower the casters and slide it
into a keeper slot to lock them in. You can see the station here:
http://store.yahoo.com/backissuesstore/sn050.html
but it doesn't show the casters very well at all.
Dan
Check out the Vega fence. I am very satisfied with mine. It has a micro
adjust on it too.
"rob" <[email protected]> wrote in message
news:[email protected]...
> Hi All,
> I am planning on upgrading my Delta contractor saw with an
> accusquare 50" fence, and while doing so, building a mobile
> stand/cabinet under it. I have seen a few plans in the past for these,
> each with different features. If you know of plans you like or have
> built, I would love to have some recommendations. Or if you have
> pictures of one in your shop, please post! Any fodder for the idea
> mill is great.
>
> Thanks!
> Rob
> p.s. Also if you have any positive/negative comments or tips on the
> Accusquare fence, let me know! I see they have it at Rockler for $229.
> Seems like an OK deal.