SWMBO and I went to a crafts festival this morning. There was a booth from
a vendor named Blue Knight Windsor Chairs.
http://www.blueknightwindsorchairs.com/photo-gallery/
I'm not sure how one becomes designated as a Master Chair Maker, but
apparently Bill Peck is one.
I said in a rocking chair and thought that it was the most comfortable
wooden rocker I had ever sat in. That's when the lady running the booth
said "Nothing personal, but you'll like this one even better. It's sized
for people of your size." (Read: Short: 5'4")
She was 100% right. I felt like I was being hugged by the chair. The seat,
the curved lumbar spindles, the height of the arms. Everything was just,
well, comfortable.
A person of slightly larger stature (width, not height) sat in the "bigger"
chair and said that she liked the seat and arms, but mentioned that the back
was too tall.
The lady running the booth said that each chair is custom made. "In fact,
someone ordered that chair earlier today but the back will be about 4"
shorter."
I chose not to ask for the price of the chair I sat in. As comfortable as
it was, I don't need it. Even though I'm sure that it would be expensive, I
was afraid that the price might be something I considered "reasonable" for
a chair that nice and I'd end up buying it. ;-)
On Sunday, September 9, 2018 at 4:14:08 PM UTC-5, DerbyDad03 wrote:
> SWMBO and I went to a crafts festival this morning. There was a booth from
> a vendor named Blue Knight Windsor Chairs.
>
> http://www.blueknightwindsorchairs.com/photo-gallery/
>
> I'm not sure how one becomes designated as a Master Chair Maker, but
> apparently Bill Peck is one.
>
> I said in a rocking chair and thought that it was the most comfortable
> wooden rocker I had ever sat in. That's when the lady running the booth
> said "Nothing personal, but you'll like this one even better. It's sized
> for people of your size." (Read: Short: 5'4")
>
> She was 100% right. I felt like I was being hugged by the chair. The seat,
> the curved lumbar spindles, the height of the arms. Everything was just,
> well, comfortable.
>
> A person of slightly larger stature (width, not height) sat in the "bigger"
> chair and said that she liked the seat and arms, but mentioned that the back
> was too tall.
>
> The lady running the booth said that each chair is custom made. "In fact,
> someone ordered that chair earlier today but the back will be about 4"
> shorter."
>
> I chose not to ask for the price of the chair I sat in. As comfortable as
> it was, I don't need it. Even though I'm sure that it would be expensive, I
> was afraid that the price might be something I considered "reasonable" for
> a chair that nice and I'd end up buying it. ;-)
These look like great chairs. I feel the same say about Bent & Bros colonial arm chairs. I was lucky to find one for 50 dollars. I'd like to try to make one some day.
On Sunday, September 9, 2018 at 4:14:08 PM UTC-5, DerbyDad03 wrote:
> SWMBO and I went to a crafts festival this morning. There was a booth fro=
m
> a vendor named Blue Knight Windsor Chairs.
>=20
> http://www.blueknightwindsorchairs.com/photo-gallery/
>=20
> I'm not sure how one becomes designated as a Master Chair Maker, but
> apparently Bill Peck is one.
Attended the Rochester Memorial Art Galleries Clothesline Art festival? I=
read part of their blog. Lucky you and the Misses.
As to my cypress chairs, I tried carving the seats similarly to the Windsor=
chair seats. It's hard work and takes some skill. My seats aren't perf=
ect, by a long shot, but they look nice for the rustic design. A curved s=
corp is a must, as well as another smaller scorp-type tool (don't recall t=
he name at the moment).
I viewed some videos of the Windsor seat carving. I could only guess the =
wood was green, as it looked easy to carve. I don't recall if it was Roy U=
nderhill or a guest, that carved a green seat and was to allow it to dry, s=
ome. I suppose Mr. Peck carves green wood, also, and allows it to dry, be=
fore finishing the final carving. My dry wood is not easy to carve, thoug=
h it's cypress (not a dense wood).
Still, green or dry, Bill Peck does some very nice work. Wish I could watc=
h a master at work. =20
Sonny
On Sun, 09 Sep 2018 23:26:01 -0500, Markem <[email protected]>
wrote:
>On Sun, 9 Sep 2018 14:14:05 -0700 (PDT), DerbyDad03
><[email protected]> wrote:
>
>>SWMBO and I went to a crafts festival this morning. There was a booth from
>>a vendor named Blue Knight Windsor Chairs.
>>
>>http://www.blueknightwindsorchairs.com/photo-gallery/
>>
>>I'm not sure how one becomes designated as a Master Chair Maker, but
>>apparently Bill Peck is one.
>>
>>I said in a rocking chair and thought that it was the most comfortable
>>wooden rocker I had ever sat in. That's when the lady running the booth
>>said "Nothing personal, but you'll like this one even better. It's sized
>>for people of your size." (Read: Short: 5'4")
>>
>>She was 100% right. I felt like I was being hugged by the chair. The seat,
>>the curved lumbar spindles, the height of the arms. Everything was just,
>>well, comfortable.
>>
>>A person of slightly larger stature (width, not height) sat in the "bigger"
>>chair and said that she liked the seat and arms, but mentioned that the back
>>was too tall.
>>
>>The lady running the booth said that each chair is custom made. "In fact,
>>someone ordered that chair earlier today but the back will be about 4"
>>shorter."
>>
>>I chose not to ask for the price of the chair I sat in. As comfortable as
>>it was, I don't need it. Even though I'm sure that it would be expensive, I
>>was afraid that the price might be something I considered "reasonable" for
>>a chair that nice and I'd end up buying it. ;-)
>
>Mr. Peck sure makes pretty stuff!
FWIW, there's a price list at
<http://www.blueknightwindsorchairs.com/prices/>. Not bad for
made-to-order furniture. Less than the retail price for the office
chairs that my employer provides us.
On Sun, 9 Sep 2018 14:14:05 -0700 (PDT), DerbyDad03
<[email protected]> wrote:
>SWMBO and I went to a crafts festival this morning. There was a booth from
>a vendor named Blue Knight Windsor Chairs.
>
>http://www.blueknightwindsorchairs.com/photo-gallery/
>
>I'm not sure how one becomes designated as a Master Chair Maker, but
>apparently Bill Peck is one.
>
>I said in a rocking chair and thought that it was the most comfortable
>wooden rocker I had ever sat in. That's when the lady running the booth
>said "Nothing personal, but you'll like this one even better. It's sized
>for people of your size." (Read: Short: 5'4")
>
>She was 100% right. I felt like I was being hugged by the chair. The seat,
>the curved lumbar spindles, the height of the arms. Everything was just,
>well, comfortable.
>
>A person of slightly larger stature (width, not height) sat in the "bigger"
>chair and said that she liked the seat and arms, but mentioned that the back
>was too tall.
>
>The lady running the booth said that each chair is custom made. "In fact,
>someone ordered that chair earlier today but the back will be about 4"
>shorter."
>
>I chose not to ask for the price of the chair I sat in. As comfortable as
>it was, I don't need it. Even though I'm sure that it would be expensive, I
>was afraid that the price might be something I considered "reasonable" for
>a chair that nice and I'd end up buying it. ;-)
Mr. Peck sure makes pretty stuff!