Thanks for the responses.
Got an extractor fan in the bathroom for the little good it does. Can't
be be replaced without some serious redecorating. Going to try all the
suggestions mentioned. Don't have a problem with the mirrors getting
cleaned. I do this myself. As I'm out of work I do most of the
housework to keep busy.
As for Charley's suggestion on heating the mirror I may have hit upon
an idea. Small heat pads for reptiles should be suitable shouldn't
they? The mirror is about the same size as a small lizard tank. Since
the mirror is to be mounted on a door surely I could router a small
area for the mat to sit in so the mirror still sits flush to the piece
of wood. Then run the cable through the door, back into the cabinets
light fittings.
TR
TrailRat wrote:
> Replacing a damaged mirror in a freecycled bathroom cabinet and was
> curious as to how you prevent your mirror from fogging up if the
> bathroom gets steamy. This would be useful to me because I shave right
> after I get out of the shower.
>
> TR
>
Dissolve a little soap in alcohol. Spray lightly on glass using spray
bottle. Wipe with cloth or paper towel until dry & shiny.
--
Gerald Ross
Cochran, GA
I couldn't care less about apathy.
----== Posted via Newsfeeds.Com - Unlimited-Unrestricted-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----
On Tue, 17 Jan 2006 11:38:53 +0000 (UTC), with neither quill nor
qualm, "connor aston" <[email protected]> quickly quoth:
>I cant really believe this is the 23rd Post to this question!
>http://www.shavenomore.com/?a=05112005
Bwahahahaha! "ONLY" $50/month!
--------------------------------------------
-- I'm in touch with my Inner Curmudgeon. --
http://diversify.com Comprehensive Website Development
============================================================
On 16 Jan 2006 07:50:47 -0800, with neither quill nor qualm,
"TrailRat" <[email protected]> quickly quoth:
>Replacing a damaged mirror in a freecycled bathroom cabinet and was
>curious as to how you prevent your mirror from fogging up if the
>bathroom gets steamy. This would be useful to me because I shave right
>after I get out of the shower.
Fog-X on the mirror, colder/shorter showers, vent the bathroom. OK?
-------------------------------------------
Crapsman tools are their own punishment
http://diversify.com Comprehensive Website Design
======================================================
2 things.
1 - spit is the old standby. Sounds gross but hock a good loogie on it and
rub it in and rinse it off.
Works great for my diving masks and small mirror I use in the shower to
shave. Full size mirror not really an option. (unless you have a bad cold)
2 - Use shaving cream. Rub it in - wipe it off - should last for a few
showers w/out steaming up.
You can even try it in one circle on the mirror and see how it works.
"TrailRat" <[email protected]> wrote in message
news:[email protected]...
> Replacing a damaged mirror in a freecycled bathroom cabinet and was
> curious as to how you prevent your mirror from fogging up if the
> bathroom gets steamy. This would be useful to me because I shave right
> after I get out of the shower.
>
> TR
>
Mon, Jan 16, 2006, 7:50am (EST-3) [email protected] (TrailRat)
doth burble:
<snip> how you prevent your mirror from fogging up if the bathroom gets
steamy. This would be useful to me because I shave right after I get out
of the shower.
It's an extrememly compicated procedure, but works quite well for
me. I'll try put it in plain terms, that are fairly easy for most
people to comprehend.
Wipe off the mirror, when you get out of the shower, before you
shave.
JOAT
If you can't say anything nice about someone, you must be talking about
Hilary Clinton.
On 16 Jan 2006 07:50:47 -0800, "TrailRat" <[email protected]>
wrote:
>Replacing a damaged mirror in a freecycled bathroom cabinet and was
>curious as to how you prevent your mirror from fogging up if the
>bathroom gets steamy. This would be useful to me because I shave right
>after I get out of the shower.
>
>TR
Install a good bathroom fan.
In article <[email protected]>, "TrailRat" <[email protected]> wrote:
>Replacing a damaged mirror in a freecycled bathroom cabinet and was
>curious as to how you prevent your mirror from fogging up if the
>bathroom gets steamy. This would be useful to me because I shave right
>after I get out of the shower.
Simplest solution to that problem is one I adopted many years ago: shave in
the shower. You really *don't* need a mirror to shave, and it's easier to
rinse the shaving cream off when you're done, too.
--
Regards,
Doug Miller (alphageek at milmac dot com)
It's time to throw all their damned tea in the harbor again.
"Ron Magen" wrote in message
> Hey, Swing . . .,
>
> I have a beard {not 'Full'} and a moustache. After a lot of aggravation
> trying to KEEP the mirror clear, I started shaving IN the shower. No
cream,
> brush, etc. - just nicely softened whiskers.
>
> Ever see a blind man shave? Same technique. Use your finger to 'trace' the
> line of the beard, the other hand holds the razor. Do any 'finite edging'
> over the sink, later.
LOL ... No way in hell I could do that and come out looking properly dapper,
so I got in the habit of shaving before I got in the shower. Now I just
build the bathroom big enough so that the mirror doesn't fog. ;)
--
www.e-woodshop.net
Last update: 12/13/05
"Phisherman" wrote in message
> Install a good bathroom fan.
Or fan)s) ... best solution of all.
We have a large, semi-enclosed shower in a fairly large bathroom ... with
three fart fans, one dead center over the shower, one in the middle of the
room, and one in the "water closet", which is behind its own door, I've
never had a problem with mirrors fogging in this bathroom in any weather.
--
www.e-woodshop.net
Last update: 12/13/05
A low wattage heating element installed behind the mirror works pretty good,
but it requires some pretty extensive construction work to install it. I
once saw this in a "high end" model home and thought it was a pretty good
idea. I have no idea where to get the heating element though.
I use the hair dryer and blow it at the mirror when I'm having this
problem. It only takes about a minute or so to clear the mirror and the
residual heat that's left in the mirror will keep it from fogging back up.
You might also try a light application of glycerin. It will work OK, until
SYMBO cleans the mirror.
--
Charley
"TrailRat" <[email protected]> wrote in message
news:[email protected]...
> Replacing a damaged mirror in a freecycled bathroom cabinet and was
> curious as to how you prevent your mirror from fogging up if the
> bathroom gets steamy. This would be useful to me because I shave right
> after I get out of the shower.
>
> TR
>
"TrailRat" <[email protected]> wrote in message
news:[email protected]...
> Replacing a damaged mirror in a freecycled bathroom cabinet and was
> curious as to how you prevent your mirror from fogging up if the
> bathroom gets steamy. This would be useful to me because I shave right
> after I get out of the shower.
>
> TR
>
That is condensation. Either use an electric vent fan to exhaust the humid
air out of the bath room while you are showering or use something to warm
the mirror. Moisture usually does not condense on a surface that is warmer
than the ambient temperature.
Or there are some products that you apply to the surface that helps cut
down on the fogging. Check with your local glass supplier.
Or do like I did, shave in the shower. Do you need a mirror to see where
your face is? LOL.. It took me about a week to learn to use my other hand
to feel for the spots that needed more attention. Less mess in the shower.
Also as you can rinse your face right there and you beard is soft and easier
to cut at the end of your shower before you get out.
[email protected] (J T) wrote:
> Wipe off the mirror, when you get out of the shower,
> before you shave.
That leaves streaks. I always use the hair dryer.
The Repair Guy
http://repairguy1993.netfirms.com/
Hey, Swing . . .,
I have a beard {not 'Full'} and a moustache. After a lot of aggravation
trying to KEEP the mirror clear, I started shaving IN the shower. No cream,
brush, etc. - just nicely softened whiskers.
Ever see a blind man shave? Same technique. Use your finger to 'trace' the
line of the beard, the other hand holds the razor. Do any 'finite edging'
over the sink, later.
Regards,
Ron Magen
Backyard Boatshop
{I'm a sailor, of course. No 'real pirate' shaves !!}
"Swingman" <[email protected]> wrote in message
news:[email protected]...
> "Doug Miller" wrote in message <
>
> >You really *don't* need a mirror to shave,
>
> Spoken like a man with no moustache/goatee.
>
> --
> www.e-woodshop.net
> Last update: 12/13/05
>
>
On 16 Jan 2006 07:50:47 -0800, "TrailRat" <[email protected]>
wrote:
>Replacing a damaged mirror in a freecycled bathroom cabinet and was
>curious as to how you prevent your mirror from fogging up if the
>bathroom gets steamy. This would be useful to me because I shave right
>after I get out of the shower.
>
>TR
You can use WD40 according to the list of uses at:
http://www.twbc.org/wd40.htm
HTH
Bill : >
In article <[email protected]>, "Swingman" <[email protected]> wrote:
>"Doug Miller" wrote in message <
>
>>You really *don't* need a mirror to shave,
>
>Spoken like a man with no moustache/goatee.
Touche' !
--
Regards,
Doug Miller (alphageek at milmac dot com)
It's time to throw all their damned tea in the harbor again.
On 16 Jan 2006 07:50:47 -0800, with neither quill nor qualm,
"TrailRat" <[email protected]> quickly quoth:
>Replacing a damaged mirror in a freecycled bathroom cabinet and was
>curious as to how you prevent your mirror from fogging up if the
>bathroom gets steamy. This would be useful to me because I shave right
>after I get out of the shower.
I forgot two things: try shaving BEFORE the shower, while you can
still see in the mirror; or leave the bathroom door open so the steam
doesn't fill it.
-------------------------------------------
Crapsman tools are their own punishment
http://diversify.com Comprehensive Website Design
======================================================
On Mon, 16 Jan 2006 16:51:54 GMT, "Charley" <[email protected]>
wrote:
>A low wattage heating element installed behind the mirror works pretty good,
>but it requires some pretty extensive construction work to install it.
These are increasingly common in the UK and they're not hugely expensive
or awkward to install.
http://www.screwfix.com/app/sfd/cat/pro.jsp?cId=101315&ts=39573&id=77859
The main thing though is to vent the damp air from the shower, not have
it hanging around the bathroom.