The table? The TABLE? Did you look at the CHAIR???!!!! That makes Fugly
look like a compliment. I've never seen anything more unbalanced from top
to bottom. They should have nailed the seat to some tubafors and been done
with it!
Joe C.
"Andy Dingley" <[email protected]> wrote in message
news:[email protected]...
> On 16 Feb 2005 08:24:25 -0800, [email protected] wrote:
>
> >Does anyone have advice on how I'd go about making the legs pictured
> >here:
>
> Chainsaw.
>
> Then when you've got rid of that ugly piece of crap, find almost any
> book on 18th century furniture and see how to make cabriole legs. Fine
> Woodworking have a useful book, Jeffrey Greene's is about the best
> reading material.
>
> General technique is to bandsaw roughly to shape, then use low-angle
> spokeshaves and rasps to shape the rest by hand. A failure is when
> you've left the bandsaw ridge running down the outside. A good apron
> design is also important, something that allows the "crown" of the leg
> (as you term it) to look like it belongs with the rest of the design.
>
> I've seen goats with better "cabriole" legs than on that table.
>
On 16 Feb 2005 08:24:25 -0800, [email protected] wrote:
>Does anyone have advice on how I'd go about making the legs pictured
>here:
Chainsaw.
Then when you've got rid of that ugly piece of crap, find almost any
book on 18th century furniture and see how to make cabriole legs. Fine
Woodworking have a useful book, Jeffrey Greene's is about the best
reading material.
General technique is to bandsaw roughly to shape, then use low-angle
spokeshaves and rasps to shape the rest by hand. A failure is when
you've left the bandsaw ridge running down the outside. A good apron
design is also important, something that allows the "crown" of the leg
(as you term it) to look like it belongs with the rest of the design.
I've seen goats with better "cabriole" legs than on that table.
[email protected] wrote:
> Does anyone have advice on how I'd go about making the legs pictured
> here:
>
> http://www.furnitureontheweb.com/NoFrame/items/093215nf.html
>
> I haven't figured out how to make the crown at the top of the leg.
>
Todd,
Make a full size pattern of the leg on paper. Trace it onto some
hardborad or thin plywood and cut out a template. Place the template on
one side of the blank and trace the pattern. Turn the blank so the
pattern you traced is either facing left or right (depending on whether
the leg is upside down or right side up) and trace the pattern again.
The patterns should meet at the corner of the blank. In other words,
don't trace them on opposite side trace the pattern on the adjacent side
of the blank. Cut out one side on a band saw. Tape the pieces you just
cut back to the blank and flip it onto the adjacent side and cut the
blank again. That will give you a rough cut leg with all of the curves.
Then choose your weapon -- spokeshaves, rasps, scrapers, sander, carving
chisels and shape the leg.
Rudy
Andy:
I thought you were awfully rude -- then I looked at the picture. Now I
understand, and see why the markdown. Those legs look squat - due to the
large "knob" at the top of the leg. Sense of proportion seems wrong to me.
However, taste isn't disputable. :-)
Would prefer carving tools and spokeshave myself. Never did like
rasps... see above comment. :-)
Andy Dingley wrote:
> On 16 Feb 2005 08:24:25 -0800, [email protected] wrote:
>
>
>>Does anyone have advice on how I'd go about making the legs pictured
>>here:
>
>
> Chainsaw.
>
> Then when you've got rid of that ugly piece of crap, find almost any
> book on 18th century furniture and see how to make cabriole legs. Fine
> Woodworking have a useful book, Jeffrey Greene's is about the best
> reading material.
>
> General technique is to bandsaw roughly to shape, then use low-angle
> spokeshaves and rasps to shape the rest by hand. A failure is when
> you've left the bandsaw ridge running down the outside. A good apron
> design is also important, something that allows the "crown" of the leg
> (as you term it) to look like it belongs with the rest of the design.
>
> I've seen goats with better "cabriole" legs than on that table.
>
--
Will
Occasional Techno-geek
Thanks for the link -- good article.
Lee
remove NO SPAMMERS for email
On 16 Feb 2005 14:30:17 -0800, "A.M. Wood"
<[email protected]> wrote:
>"I haven't figured out how to make the crown at the top of the leg."
>
>Neither did the guy who made the legs on the table & chair in the
>picture :)
>
>This may be helpful. Not sure if someone else already posted it.
>
>http://www.lvwwg.com/mar01/LVWG0301email.HTM