Today I received a late Christmas present which had been ordered from Canada
by my daughter's boyfriend.
The present is TWO books, Volume 1 and 2 on the "Steel Square and it's
Uses". The books are copyrighted 1907. The first is 246 pages and the
second is 243 pages. Almost 500 pages on the simple steel square.
In case you are interested, the author was William Radford, editor-in-chief
of the "American Carpenter and Builder".
Dick Snyder wrote:
> TWO books, Volume 1 and 2 on the "Steel Square and it's
> Uses". The books are copyrighted 1907.
> Almost 500 pages on the simple steel square.
> the author was William Radford, editor-in-chief
> of the "American Carpenter and Builder".
<Snipola>
Cool set, I have the same set from 1904 with house plans in the back.
It's a good read and the illustrations are great. Everybody loves a
good book with pictures.
Modern times dictate that you must use a construction calculator and a
speed square. I know several local contractors who don't know how to
use a steel square. I have several other books on the steel square and
several examples of fine steel squares.
Tom in KY, if you have a nice steel square that you are not using, or a
book that you don't really want to read, e-mail me and I'll give you an
address where you can dispose of that particular piece of clutter. As
always, glad to be of service.
Dick Snyder wrote:
> Today I received a late Christmas present which had been ordered from Canada
> by my daughter's boyfriend.
> The present is TWO books, Volume 1 and 2 on the "Steel Square and it's
> Uses". The books are copyrighted 1907. The first is 246 pages and the
> second is 243 pages. Almost 500 pages on the simple steel square.
>
> In case you are interested, the author was William Radford, editor-in-chief
> of the "American Carpenter and Builder".
Cool!
Some of us must be content with the Web version of "Handy Farm Devices
and How to Make Them."
http://journeytoforever.org/farm_library/device/devices2.html
Larry Blanchard wrote:
> I've got one called "ABC of the Steel Square and its Uses" by Fred
> Hodgson. Copyright 1908.
> From the preface:
>
> "Since writing up my first essay on the Steel Square in 1868 ..."
>
> "... my larger works on the subject ... some 30 years ago ..."
> (His larger works were 600 pages in two volumes.)
The same set that I have
>
> And talking of other books on the subject:
>
> "... nearly all these books and papers contain have been built upon my
> foundations ... without a word of credit being given to the original
> writer."
There were other books and papers written with the same illustrations
and different authors listed. Who is the listed publisher on the ABC's?
>
> Maybe the author of your volumes was one of the plagarizers (sp?) that
> Fred was complaining about :-)
<ssssnip!>
The two volume set was written by Fred T. Hodgsen. The publisher and
editor-in-chief was Radford.
Tom in KY, With credit going to The Radford Architectural Co.
Riverside Il. Chicago and New York. AND to the author Fred T. Hodgsen,
listed directly on the covers of my two volume set.
Dick Snyder wrote:
> Today I received a late Christmas present which had been ordered from
> Canada by my daughter's boyfriend.
> The present is TWO books, Volume 1 and 2 on the "Steel Square and it's
> Uses". The books are copyrighted 1907. The first is 246 pages and the
> second is 243 pages. Almost 500 pages on the simple steel square.
>
I've got one called "ABC of the Steel Square and its Uses" by Fred
Hodgson. Copyright 1908.
From the preface:
"Since writing up my first essay on the Steel Square in 1868 ..."
"... my larger works on the subject ... some 30 years ago ..."
(His larger works were 600 pages in two volumes.)
And talking of other books on the subject:
"... nearly all these books and papers contain have been built upon my
foundations ... without a word of credit being given to the original
writer."
Maybe the author of your volumes was one of the plagarizers (sp?) that
Fred was complaining about :-)
--
It's turtles, all the way down
Squarei4dtoolguy wrote:
>> And talking of other books on the subject:
>>
>> "... nearly all these books and papers contain have been built upon
>> my foundations ... without a word of credit being given to the
>> original writer."
>
> There were other books and papers written with the same illustrations
> and different authors listed. Who is the listed publisher on the
> ABC's?
>
Frederick R Drake & Co
Chicago
--
It's turtles, all the way down
Squarei4dtoolguy wrote:
>>
>> Maybe the author of your volumes was one of the plagarizers (sp?)
>> that Fred was complaining about :-)
> <ssssnip!>
>
> The two volume set was written by Fred T. Hodgsen. The publisher and
> editor-in-chief was Radford.
The original poster said of his set:
... the author was William Radford, editor-in-chief
of the "American Carpenter and Builder"
You say Radford was the publisher of your set. Busy little bee wasn't
he?
--
It's turtles, all the way down
On Thu, 2 Feb 2006 17:29:16 -0500, "Dick Snyder"
<[email protected]> wrote:
>Today I received a late Christmas present which had been ordered from Canada
>by my daughter's boyfriend.
>The present is TWO books, Volume 1 and 2 on the "Steel Square and it's
>Uses". The books are copyrighted 1907. The first is 246 pages and the
>second is 243 pages. Almost 500 pages on the simple steel square.
>
>In case you are interested, the author was William Radford, editor-in-chief
>of the "American Carpenter and Builder".
>
I live in Canada. Any chance you could send it back? A long time
back I had one called "The Carpenter's Square." A small book ,but
awesome, in the end detailing how to build a spiral staircase.
Tell your daughter to keep the boyfriend.
"Guess who" <[email protected]> wrote in message
news:[email protected]...
> I live in Canada. Any chance you could send it back? A long time
> back I had one called "The Carpenter's Square." A small book ,but
> awesome, in the end detailing how to build a spiral staircase.
>
> Tell your daughter to keep the boyfriend.
>
Not sure of the title but Lee Valley offers one or two books on the use of
the framing square....I believe they are reprints of older publications.
Cheers,
cc
The first page of my bookd says this about Radford:
"EDITED UNDER THE SUPERVISION OF WILLAM A. RADFORD
Editor in Chief ot the 'American Carpenter and Builder,' President of 'The
Radford Architectural Co.,' and the best authority in the country
of all things pertaining to the building trade"
Certainly not a shy guy was he? If you google him you will see his name
listed on various home building books.
"Larry Blanchard" <[email protected]> wrote in message
news:[email protected]...
> Squarei4dtoolguy wrote:
>
>>>
>>> Maybe the author of your volumes was one of the plagarizers (sp?)
>>> that Fred was complaining about :-)
>> <ssssnip!>
>>
>> The two volume set was written by Fred T. Hodgsen. The publisher and
>> editor-in-chief was Radford.
>
> The original poster said of his set:
>
> ... the author was William Radford, editor-in-chief
> of the "American Carpenter and Builder"
>
> You say Radford was the publisher of your set. Busy little bee wasn't
> he?
>
> --
> It's turtles, all the way down
Huh. There is no reference to Hodgson in my two books or at least I don't
see anything in the early pages of either book prior to the actual text
starting. Maybe he was ripped off???
"Squarei4dtoolguy" <[email protected]> wrote in message
news:[email protected]...
>
> Larry Blanchard wrote:
>> I've got one called "ABC of the Steel Square and its Uses" by Fred
>> Hodgson. Copyright 1908.
>> From the preface:
>>
>> "Since writing up my first essay on the Steel Square in 1868 ..."
>>
>> "... my larger works on the subject ... some 30 years ago ..."
>> (His larger works were 600 pages in two volumes.)
>
> The same set that I have
>
>>
>> And talking of other books on the subject:
>>
>> "... nearly all these books and papers contain have been built upon my
>> foundations ... without a word of credit being given to the original
>> writer."
>
> There were other books and papers written with the same illustrations
> and different authors listed. Who is the listed publisher on the ABC's?
>
>>
>> Maybe the author of your volumes was one of the plagarizers (sp?) that
>> Fred was complaining about :-)
> <ssssnip!>
>
> The two volume set was written by Fred T. Hodgsen. The publisher and
> editor-in-chief was Radford.
>
> Tom in KY, With credit going to The Radford Architectural Co.
> Riverside Il. Chicago and New York. AND to the author Fred T. Hodgsen,
> listed directly on the covers of my two volume set.
>