Thanks for the great advice! Turps it is.
Joe
"Joe Befumo" <[email protected]> wrote in message
news:[email protected]...
> Any thoughts on the relative merits of turpentine versus paint thinnner
> for thinning a mixture of Tung Oil and Varnish? (Application is to new
> maple kitchen cabinets).
>
> Thanks.
>
> Joe
>
Joe Befumo <[email protected]> wrote:
: Any thoughts on the relative merits of turpentine versus paint thinnner for
: thinning a mixture of Tung Oil and Varnish? (Application is to new maple
: kitchen cabinets).
I once compared tung oil cut with the two, and it seemed that the mix
with turpentine (the real stuff) built to a sheen much fastere than the stuff cut
with mineral spirits. I've heard the same from a couple of other people.
-- Andy Barss
In article <[email protected]>,
"Joe Befumo" <[email protected]> wrote:
> Any thoughts on the relative merits of turpentine versus paint thinnner for
> thinning a mixture of Tung Oil and Varnish? (Application is to new maple
> kitchen cabinets).
Between the two, I prefer the turpentine - as long as I'm going to use a
slow evaporating agent, I like the smell of turps better. You might
consider using VMP Naptha for a faster evaporating thinner - which is
what I go with 95% of the time. Faster thinner evap may lessen the dust
nibs.
--
Owen Lowe
The Fly-by-Night Copper Company
__________
"I pledge allegiance to the flag of the
Corporate States of America and to the
Republicans for which it stands, one nation,
under debt, easily divisible, with liberty
and justice for oil."
- Wiley Miller, Non Sequitur, 1/24/05