Display Case project is Finished

On Mar 5, 12:22 pm, BrianSiano <[email protected]> wrote:
> I've been working on a glass display box for a Nautilus model I have.
> I'm self-taught and prone to procrastination and second-guessing,
> which explains why it took me several months to do this pretty simple
> project. But, you can see photos of the semi-finished project at:
>
> http://briansiano.livejournal.com/643709.html
>
> Previous blog entries about this project are, in order:
>
> http://briansiano.livejournal.com/564794.htmlhttp://briansiano.livejournal.com/594931.htmlhttp://briansiano.livejournal.com/596626.htmlhttp://briansiano.livejournal.com/597986.html
> (Somewhere in here, I switched to Oak, but took no photos.)http://briansiano.livejournal.com/643709.html

Nice! And I've always empathized with Captain Nemo. Tom

Did you use the same amount of finish on the top and bottom? If the
number of coats is unequal, one side could adsorb more moisture than
the other which will cause it to warp.

Mitch

On Mar 5, 2:22=A0pm, BrianSiano <[email protected]> wrote:
> I've been working on a glass display box for a Nautilus model I have.
> I'm self-taught and prone to procrastination and second-guessing,
> which explains why it took me several months to do this pretty simple
> project. But, you can see photos of the semi-finished project at:
>
> http://briansiano.livejournal.com/643709.html
>
> Previous blog entries about this project are, in order:
>
> http://briansiano.livejournal.com/564794.htmlhttp://briansiano.livejourna=
l.com/594931.htmlhttp://briansiano.livejournal.com/596626.htmlhttp://brians=
iano.livejournal.com/597986.html
> (Somewhere in here, I switched to Oak, but took no photos.)http://briansi=
ano.livejournal.com/643709.html


It looks nice!

A friend of mine once told me something that I've taken to heart when
it comes to projects: The best time to start a project is right after
you finish it.

So far it's held true in every single thing that comes out of my
workshop.

For the base, which probably won't straighten out like you're hoping,
you can always just take some of the scrap oak and make some feet for
your case. Even 1" feet with some nice curves will help. Also, it
might help when you move it to another location. You can work to make
sure your boards are flat to 1/1000", but it won't do you any good if
the thing you're setting them on are wavy and warped. :-)

-Nathan

"BrianSiano" <[email protected]> wrote in message
news:031ed5a4-44e4-4ef1-92bd-45eff795d568@v38g2000yqb.googlegroups.com...
> I've been working on a glass display box for a Nautilus model I have.
> I'm self-taught and prone to procrastination and second-guessing,
> which explains why it took me several months to do this pretty simple
> project. But, you can see photos of the semi-finished project at:
>
> http://briansiano.livejournal.com/643709.html
>
> Previous blog entries about this project are, in order:
>
> http://briansiano.livejournal.com/564794.html
> http://briansiano.livejournal.com/594931.html
> http://briansiano.livejournal.com/596626.html
> http://briansiano.livejournal.com/597986.html
> (Somewhere in here, I switched to Oak, but took no photos.)
> http://briansiano.livejournal.com/643709.html

Brian,

Impressive work. You should be proud. :-)

You said you will find another way to make the 45 degree joints.
I've never built a case like that, but I think that a shooting board and
hand plane would make short work of it. You can adjust a miter with shims,
even a paper's thickness.