My dual drum sander came with 5" wide sandpaper on its drums. The drums are
5" diameter.
I couldnt find 5" paper in stock so I bought some (a lot?) of 3" paper.
The problem is that when I wind the paper around the drum it doesnt line up
to the slot on the right hand end the way the original 5" paper did.
I can't get the end trimmed properly to get it into the catch. I think I
must not be cutting the start side to the proper angle although the paper
is winding on at about 45degrees which looks like a good angle.
Is there a template for cutting different widths of paper or do I just have
to experiment and waste a lot of expensive paper?
Tom in Victoria
Tom Woodman wrote:
> My dual drum sander came with 5" wide sandpaper on its drums. The
> drums are 5" diameter.
> I couldnt find 5" paper in stock so I bought some (a lot?) of 3"
> paper. The problem is that when I wind the paper around the drum it
> doesnt line up to the slot on the right hand end the way the original
> 5" paper did.
> I can't get the end trimmed properly to get it into the catch. I
> think I must not be cutting the start side to the proper angle
> although the paper is winding on at about 45degrees which looks like
> a good angle.
> Is there a template for cutting different widths of paper or do I
> just have to experiment and waste a lot of expensive paper?
Wind it on then run a pencil around the underside on the right, trim to
pencil line.
--
dadiOH
____________________________
dadiOH's dandies v3.06...
...a help file of info about MP3s, recording from
LP/cassette and tips & tricks on this and that.
Get it at http://mysite.verizon.net/xico
"Tom Woodman" <[email protected]> writes:
> My dual drum sander came with 5" wide sandpaper on its drums. The drums are
> 5" diameter.
[...]
> Is there a template for cutting different widths of paper or do I just have
> to experiment and waste a lot of expensive paper?
Experiment and waste cheap packing paper or old newspapers. Once you
find the right cut move to expensive sandpaper...
--
Dr. Juergen Hannappel http://lisa2.physik.uni-bonn.de/~hannappe
mailto:[email protected] Phone: +49 228 73 2447 FAX ... 7869
Physikalisches Institut der Uni Bonn Nussallee 12, D-53115 Bonn, Germany
CERN: Phone: +412276 76461 Fax: ..77930 Bat. 892-R-A13 CH-1211 Geneve 23