id like to carry around me trusty saw because although it doesn have a
wide enough set in the teeth to cut to big logs its very sharp and cuts
fast and is very good to pick up small pieces of branch wood i see that
people trimmed when im going about my usualy business. i need to make
myself a easy case that will protect the blade and saw and also the bag
id put it in. ive thought of using leather and cloth but because of the
shape it would be very hard take off. id like it to be easy and fast to
take off. itd be best if it would be able to just slip off. i was
thinking of using two very thin pieces of wood and tying them together
with a thin cord. does any one here have any other suggestions?
thanx
~B
for a pic of the saw
http://www.ehardwicks.com/product_line/pros/Zoom_Pages/GYO-610_zoom.htm
I use several Japanese hand saws - they are excellent tools. I'm
thinking about the same thing. So far I just keep them in the plastic
or carboard sleeve that they come with :-) I've seen carpenters just
placing them side-by-side in their toolboxes with no covers at all.
Not sure Id do that with an expensive one but these days some of the
blades are considered disposable.
If I were to make a sleeve I'd probably go with your idea of using a
thin plywood with spacers. espeically with more than one saw, you could
make a tote like that to hold several.
Another idea would be to cut two pieces of leather slightly larger than
the blade, stitch it along one side and top and use either a tie
string, snap or velcro to close the open side.
It might be a good idea to consider the possibility of moisture with
whatever method you end up using.
[email protected] wrote:
> id like to carry around me trusty saw because although it doesn have a
> wide enough set in the teeth to cut to big logs its very sharp and cuts
> fast and is very good to pick up small pieces of branch wood i see that
> people trimmed when im going about my usualy business. i need to make
> myself a easy case that will protect the blade and saw and also the bag
> id put it in. ive thought of using leather and cloth but because of the
> shape it would be very hard take off. id like it to be easy and fast to
> take off. itd be best if it would be able to just slip off. i was
> thinking of using two very thin pieces of wood and tying them together
> with a thin cord. does any one here have any other suggestions?
> thanx
> ~B
> for a pic of the saw
> http://www.ehardwicks.com/product_line/pros/Zoom_Pages/GYO-610_zoom.htm
Buy a folding pruning saw. They're cheap, have Japanese style teeth
and are very convenient.
http://www.epinions.com/hmgd-Lawn_and_Garden-Hand_Tools-All-CoronaClipper_Folding_Pruning_Saw_PS_4050
R
[email protected] wrote:
> If I were to make a sleeve I'd probably go with your idea of using a
> thin plywood with spacers. espeically with more than one saw, you could
> make a tote like that to hold several.
I'm thinking of a hinged scabbard type of set-up. Rout the profile
into a thin piece of stock, cut around it leaving 3/8" outside the
profile, cut another to match, hinge them and use neodymium magnets to
keep it shut.
JP
Jay Pique wrote:
> [email protected] wrote:
> > If I were to make a sleeve I'd probably go with your idea of using a
> > thin plywood with spacers. espeically with more than one saw, you could
> > make a tote like that to hold several.
>
> I'm thinking of a hinged scabbard type of set-up. Rout the profile
> into a thin piece of stock, cut around it leaving 3/8" outside the
> profile, cut another to match, hinge them and use neodymium magnets to
> keep it shut.
>
> JP
Jay, very cool idea :-)
[email protected] wrote:
> id like to carry around me trusty saw because although it doesn have a
> wide enough set in the teeth to cut to big logs its very sharp and
> cuts fast and is very good to pick up small pieces of branch wood i
> see that people trimmed when im going about my usualy business. i
> need to make myself a easy case that will protect the blade and saw
> and also the bag id put it in. ive thought of using leather and cloth
> but because of the shape it would be very hard take off. id like it
> to be easy and fast to take off. itd be best if it would be able to
> just slip off. i was thinking of using two very thin pieces of wood
> and tying them together with a thin cord. does any one here have any
> other suggestions?
I use cardboard - chipboard - for mine. Just a piece folded around the
blade and reinforced all over with duct tape. I fold the corners nearest
the handle inward so the case doesn't slip off. I also saturate the inside
with oil.
--
dadiOH
____________________________
dadiOH's dandies v3.06...
...a help file of info about MP3s, recording from
LP/cassette and tips & tricks on this and that.
Get it at http://mysite.verizon.net/xico
In article <[email protected]>,
[email protected] wrote:
> leather and cloth but because of the
> shape it would be very hard take off. id like it to be easy and fast to
> take off. itd be best if it would be able to just slip off. i was
> thinking of using two very thin pieces of wood and tying them together
> with a thin cord.
Use old blue jeans legs for material. Check out the remainder bin at a
fabric store; you can find canvas and the like there.
Look at a ryoba case at your local WW store. Memorize the construction,
then sew up (or have someone sew up) a duplicate. Use self-stick Velcro
appliques instead of the tie string. You'll have to stitch the appliques
down 'cuz the glue won't hold.
Sew or glue cardboard trapezoids to canvas trapezoids. Stitch the long
edges only. Slide the handle into the wide end and out the narrow end.
In general, learn to use a sewing machine to make bog-simple straight
seams. You can whip out any number of useful yet incredibly ugly
pouches, bags and whatnot for the shop.
If you do find someone to do the sewing for you, you might want to
reconsider the traditional 6-pack in exchange. Chocolate seems to work
better.
--
"Keep your ass behind you."