The 3HP motor from my Katrina submerged Unisaw fired up the other day.
Required $80 bucks for new bearings, new capacitors, new centrifical
switch, plus a flush and bake, but not bad to recover a motor that had
only been turned on once on the assembly line to check rotation.
The submerged GPE started it after a cleaning and a good dry out. I
was amazed at that because it still had water in the plastic case
three weeks after the storm when they finally let us in to check on
things.
Now if I can get that stock feeder to go.
A little at a time!
Frank
Frank Boettcher wrote:
> On Mon, 19 Jun 2006 13:03:48 -0500, "Swingman" <[email protected]> wrote:
>
>
>
> Once again, glad I made damn sure the finished floor of the new
>
>>house is 4' 6" above grade.
>
>
>
> Yeah, but how far above sea level :~)
>
> Frank
I'm about 7000' above sea level. No sweat. Also the humidity runs at
about 25%. We have an humidifier.
potato chip,
jo4hn
"Frank Boettcher" <[email protected]> wrote in message
news:[email protected]...
> On Mon, 19 Jun 2006 13:03:48 -0500, "Swingman" <[email protected]> wrote:
>
>
>>
> Once again, glad I made damn sure the finished floor of the new
>>house is 4' 6" above grade.
>
>
> Yeah, but how far above sea level :~)
>
> Frank
Swingman and I are about 10 miles apart. I am 81' above sea level. But
like Swingman says, its how fast the bayous drain that determines if you get
flooded or not.
"Frank Boettcher" wrote in message
>
> The 3HP motor from my Katrina submerged Unisaw fired up the other day.
> Required $80 bucks for new bearings, new capacitors, new centrifical
> switch, plus a flush and bake, but not bad to recover a motor that had
> only been turned on once on the assembly line to check rotation.
>
> The submerged GPE started it after a cleaning and a good dry out. I
> was amazed at that because it still had water in the plastic case
> three weeks after the storm when they finally let us in to check on
> things.
>
> Now if I can get that stock feeder to go.
>
> A little at a time!
That's Good news! After losing my house in Allison 5 years, 10 days, and 13
hours ago +/-, my hat's off to you. Into each life a little sun must shine,
occasionally. ;)
But not here in Houston this morning, where it looked almost like an Allison
re-run. Once again, glad I made damn sure the finished floor of the new
house is 4' 6" above grade.
--
www.e-woodshop.net
Last update: 5/6/06
On Mon, 19 Jun 2006 14:06:50 -0500, "Swingman" <[email protected]> wrote:
>
>"Frank Boettcher" wrote in message
>> On Mon, 19 Jun 2006 13:03:48 -0500, "Swingman" wrote:
>>
>>
>> >
>> Once again, glad I made damn sure the finished floor of the new
>> >house is 4' 6" above grade.
>>
>>
>> Yeah, but how far above sea level :~)
>
>Sea level's not the problem ... as Boudreaux would say: "it's the all dem
>damn bayous 'tween here and dere".
I hear that. My Mother in Law lives a good three miles from the Gulf
but close to Brickyard Bayou and Bayou Benard. She is at about 13
foot elevation. Got 18" during Camille and seven foot for Katrina.
Frank
On Mon, 19 Jun 2006 21:26:24 GMT, "Leon"
<[email protected]> wrote:
>
>"Frank Boettcher" <[email protected]> wrote in message
>news:[email protected]...
>> On Mon, 19 Jun 2006 13:03:48 -0500, "Swingman" <[email protected]> wrote:
>>
>>
>>>
>> Once again, glad I made damn sure the finished floor of the new
>>>house is 4' 6" above grade.
>>
>>
>> Yeah, but how far above sea level :~)
>>
>> Frank
>
>Swingman and I are about 10 miles apart. I am 81' above sea level. But
>like Swingman says, its how fast the bayous drain that determines if you get
>flooded or not.
>
Yeah, one of my sisters used to live off the Northwest freeway. After
three floods in about 8 years, property got condemned and she was
bought out. Something about an overdevelopment problem.
I think those Bayous used to do a better job before all that concrete
and asphalt showed up.
Frank
"Frank Boettcher" wrote in message
> On Mon, 19 Jun 2006 13:03:48 -0500, "Swingman" wrote:
>
>
> >
> Once again, glad I made damn sure the finished floor of the new
> >house is 4' 6" above grade.
>
>
> Yeah, but how far above sea level :~)
Sea level's not the problem ... as Boudreaux would say: "it's the all dem
damn bayous 'tween here and dere".
--
www.e-woodshop.net
Last update: 5/6/06
On Mon, 19 Jun 2006 12:49:44 -0500, Frank Boettcher
<[email protected]> wrote:
>
>The 3HP motor from my Katrina submerged Unisaw fired up the other day.
>Required $80 bucks for new bearings, new capacitors, new centrifical
>switch, plus a flush and bake, but not bad to recover a motor that had
>only been turned on once on the assembly line to check rotation.
>
>The submerged GPE started it after a cleaning and a good dry out. I
>was amazed at that because it still had water in the plastic case
>three weeks after the storm when they finally let us in to check on
>things.
I'll bet Gary Parks would like to hear about that. I assume you know
him or know of him...
--
LRod
Master Woodbutcher and seasoned termite
Shamelessly whoring my website since 1999
http://www.woodbutcher.net
Proud participant of rec.woodworking since February, 1997
email addy de-spam-ified due to 1,000 spams per month.
If you can't figure out how to use it, I probably wouldn't
care to correspond with you anyway.
On Tue, 20 Jun 2006 06:18:28 +0100, LRod <[email protected]>
wrote:
>On Mon, 19 Jun 2006 12:49:44 -0500, Frank Boettcher
><[email protected]> wrote:
>
>>
>>The 3HP motor from my Katrina submerged Unisaw fired up the other day.
>>Required $80 bucks for new bearings, new capacitors, new centrifical
>>switch, plus a flush and bake, but not bad to recover a motor that had
>>only been turned on once on the assembly line to check rotation.
>>
>>The submerged GPE started it after a cleaning and a good dry out. I
>>was amazed at that because it still had water in the plastic case
>>three weeks after the storm when they finally let us in to check on
>>things.
>
>I'll bet Gary Parks would like to hear about that. I assume you know
>him or know of him...
I know him. Good guy.
Frank
On Mon, 19 Jun 2006 13:03:48 -0500, "Swingman" <[email protected]> wrote:
>
Once again, glad I made damn sure the finished floor of the new
>house is 4' 6" above grade.
Yeah, but how far above sea level :~)
Frank