I think I may be missisng something here....
I got a Delta tenoning Jig at an auction with the manual. The jig is
designed to ride in the left mitre slot. I have a Delta Left Tilt saw and
my Miter slot is further away from the blade and the jig will not adjust
close enough to the blade to be used. Is there a model for the Left tilt
saw?
Anyone have this jig on a Left tilt saw??
The miter bar should be moveable to compensate for Right or Left tilt
saws. There should be an extra set of mounting holes that correspond
to correct setup for left tilt machines, as the jig comes pre-setup
for right tilt machines
John
On Wed, 15 Jun 2005 17:12:36 GMT, "Rick Cox" <[email protected]> wrote:
>I think I may be missisng something here....
>
>I got a Delta tenoning Jig at an auction with the manual. The jig is
>designed to ride in the left mitre slot. I have a Delta Left Tilt saw and
>my Miter slot is further away from the blade and the jig will not adjust
>close enough to the blade to be used. Is there a model for the Left tilt
>saw?
>Anyone have this jig on a Left tilt saw??
>
>
>
Oopss....dags "tenoning jig left tilt saw"
sorry about that
"Rick Cox" <[email protected]> wrote in message
news:[email protected]...
>I think I may be missisng something here....
>
> I got a Delta tenoning Jig at an auction with the manual. The jig is
> designed to ride in the left mitre slot. I have a Delta Left Tilt saw and
> my Miter slot is further away from the blade and the jig will not adjust
> close enough to the blade to be used. Is there a model for the Left tilt
> saw?
> Anyone have this jig on a Left tilt saw??
>
>
>
>
Well I got home and found out that it is acutally a 34-182. There were not
any additonal mounting holes.....the manual for this jig is dated 1992.
I tried to drill new holes for the miter, but the heads of the screws hit
the webbing on the underside of the top plate.
Looks like I need a newer version....anyone in columbus with a right tilt
saw??
Have a good evening.
Rick
"Rick Cox" <[email protected]> wrote in message
news:[email protected]...
>I think I may be missisng something here....
>
> I got a Delta tenoning Jig at an auction with the manual. The jig is
> designed to ride in the left mitre slot. I have a Delta Left Tilt saw and
> my Miter slot is further away from the blade and the jig will not adjust
> close enough to the blade to be used. Is there a model for the Left tilt
> saw?
> Anyone have this jig on a Left tilt saw??
>
>
>
>
It is the 183
I appreciate the answers. I did notice the "left Tilt" portion in the
Manual.
I cant wait to go home and give it a try now.
Thanks again
"no(SPAM)vasys" <"no(SPAM)vasys"@adelphia.net> wrote in message
news:[email protected]...
> Rick Cox wrote:
>> I think I may be missisng something here....
>>
>> I got a Delta tenoning Jig at an auction with the manual. The jig is
>> designed to ride in the left mitre slot. I have a Delta Left Tilt saw
>> and my Miter slot is further away from the blade and the jig will not
>> adjust close enough to the blade to be used. Is there a model for the
>> Left tilt saw?
>> Anyone have this jig on a Left tilt saw??
>>
>>
>>
>>
>
> For a left tilt saw you should be able to move the location of the miter
> bar attached to the base of the jig.
>
> --
> Jack Novak
> Buffalo, NY - USA
> [email protected]
> (Remove -SPAM- to send email)
read this: http://www.deltawoodworking.com/index.asp?e=180&p=840298
Rick Cox wrote:
> I think I may be missisng something here....
>
> I got a Delta tenoning Jig at an auction with the manual. The jig is
> designed to ride in the left mitre slot. I have a Delta Left Tilt saw and
> my Miter slot is further away from the blade and the jig will not adjust
> close enough to the blade to be used. Is there a model for the Left tilt
> saw?
> Anyone have this jig on a Left tilt saw??
>
>
>
>
for the 183, open up the pdf file listed on this link
http://www.amazon.com/exec/obidos/tg/detail/-/B00004TD3O/ref=pd_sxp_f/102-2663728-1757753?v=glance&s=hi
Rick Cox wrote:
> I think I may be missisng something here....
>
> I got a Delta tenoning Jig at an auction with the manual. The jig is
> designed to ride in the left mitre slot. I have a Delta Left Tilt saw and
> my Miter slot is further away from the blade and the jig will not adjust
> close enough to the blade to be used. Is there a model for the Left tilt
> saw?
> Anyone have this jig on a Left tilt saw??
>
>
>
>
The 183 should fit both left and right. Are you SURE it's a 183?
Rick Cox wrote:
> I think I may be missisng something here....
>
> I got a Delta tenoning Jig at an auction with the manual. The jig is
> designed to ride in the left mitre slot. I have a Delta Left Tilt saw and
> my Miter slot is further away from the blade and the jig will not adjust
> close enough to the blade to be used. Is there a model for the Left tilt
> saw?
> Anyone have this jig on a Left tilt saw??
>
>
>
>
You might also try pinging LRod about this - I believe he knows something
about the differences.
jim bailey
"Rick Cox" <[email protected]> wrote in message
news:[email protected]...
> I think I may be missisng something here....
>
> I got a Delta tenoning Jig at an auction with the manual. The jig is
> designed to ride in the left mitre slot. I have a Delta Left Tilt saw and
> my Miter slot is further away from the blade and the jig will not adjust
> close enough to the blade to be used. Is there a model for the Left tilt
> saw?
> Anyone have this jig on a Left tilt saw??
>
>
>
>
John wrote:
> The miter bar should be moveable to compensate for Right or Left tilt
> saws. There should be an extra set of mounting holes that correspond
> to correct setup for left tilt machines, as the jig comes pre-setup
> for right tilt machines
>
> John
>
> On Wed, 15 Jun 2005 17:12:36 GMT, "Rick Cox" <[email protected]> wrote:
>
>
>>I think I may be missisng something here....
>>
>>I got a Delta tenoning Jig at an auction with the manual. The jig is
>>designed to ride in the left mitre slot. I have a Delta Left Tilt saw and
>>my Miter slot is further away from the blade and the jig will not adjust
>>close enough to the blade to be used. Is there a model for the Left tilt
>>saw?
>>Anyone have this jig on a Left tilt saw??
>>
>>
I have one on a PM66. You indeed move the miter bar.
j4
Rick Cox wrote:
> I think I may be missisng something here....
>
> I got a Delta tenoning Jig at an auction with the manual. The jig is
> designed to ride in the left mitre slot. I have a Delta Left Tilt saw and
> my Miter slot is further away from the blade and the jig will not adjust
> close enough to the blade to be used. Is there a model for the Left tilt
> saw?
> Anyone have this jig on a Left tilt saw??
>
>
>
>
For a left tilt saw you should be able to move the location of the miter
bar attached to the base of the jig.
--
Jack Novak
Buffalo, NY - USA
[email protected]
(Remove -SPAM- to send email)