On Mon, 23 Aug 2004 16:31:30 -0500, "Bob Schmall" <[email protected]> wrote:
>George:
>Epoxy is one, Gorilla Glue is another. If you use the latter, be sure to
>read the directions even if that threatens your manhood. 8-)
>
both will only work so so. goop will do a great job. that will make a bond that
the material will break before the joint.
--
Knight-Toolworks & Custom Planes
Custom made wooden planes at reasonable prices
See http://www.knight-toolworks.com For prices and ordering instructions.
On Mon, 23 Aug 2004 17:32:34 -0400, "George Berlinger"
<[email protected]> wrote:
>What glue can i use to bond " oak and acrylic plastic" together......the oak
>piece being smaller n used like a handle......epoxy???/thanks....
>
You can use epoxy, but for most applications I'd think about using a
couple screws or bolts to secure a wooden handle to plastic.
On Mon, 23 Aug 2004 17:32:34 -0400, George Berlinger
<[email protected]> wrote:
> What glue can i use to bond " oak and acrylic plastic" together......the oak
> piece being smaller n used like a handle......epoxy???/thanks....
>
Epoxy. Watch how your piece is stressed. If your usual stress path is
through the wood, you should be okay. If the stress is through the
epoxy, it will fail sooner or later.
Glass or fibre-filled epoxy is another thing ENTIRELY, and can be quite
strong when properly applied.
George:
Epoxy is one, Gorilla Glue is another. If you use the latter, be sure to
read the directions even if that threatens your manhood. 8-)
Bob
"George Berlinger" <[email protected]> wrote in message
news:[email protected]...
> What glue can i use to bond " oak and acrylic plastic" together......the
oak
> piece being smaller n used like a handle......epoxy???/thanks....
>
>
[email protected] wrote:
>
>
> yeah... and what's goop?
Plumber's Goop, Carpenter's Goop, maybe others? Get it at the Borgs,
large drug stores, etc. Good stuff. If all else fails, Goop it.
mahalo,
jo4hn
(usual disclaimer goes here)
>Steve:
>You could be right but why are first two "so so?" Please explain why goop
>is better.
one is plastic is really hard to glue. things just don't stick to it. second is
flex. the two materials flex differently and that tends to break things up. the
5200 is the goop I was talking about. it is a hard version if silicone. the only
disadvantage is it takes several days to fully cure where it does not get air.
--
Knight-Toolworks & Custom Planes
Custom made wooden planes at reasonable prices
See http://www.knight-toolworks.com For prices and ordering instructions.
"George Berlinger" writes:
> What glue can i use to bond " oak and acrylic plastic" together......the
oak
> piece being smaller n used like a handle......epoxy???/thanks....
Epoxy is a waste of time.
All it will do is make a mess of the acrylic and not properly bond to the
white oak.
You need a mastic type product.
Consider 3M, 5200, SikaFlex 291,292, etc.
5200 is available at Home Depot or any decent marine chandlery.
HTH
--
Lew
S/A: Challenge, The Bullet Proof Boat, (Under Construction in the Southland)
Visit: <http://home.earthlink.net/~lewhodgett> for Pictures
"Steve Knight" <[email protected]> wrote in message
news:[email protected]...
> On Mon, 23 Aug 2004 16:31:30 -0500, "Bob Schmall" <[email protected]>
wrote:
>
> >George:
> >Epoxy is one, Gorilla Glue is another. If you use the latter, be sure to
> >read the directions even if that threatens your manhood. 8-)
> >
> both will only work so so. goop will do a great job. that will make a bond
that
> the material will break before the joint.
Steve:
You could be right but why are first two "so so?" Please explain why goop
is better.
Bob
On Wed, 25 Aug 2004 08:32:18 -0500, "Bob Schmall" <[email protected]>
wrote:
>
>"Steve Knight" <[email protected]> wrote in message
>news:[email protected]...
>> On Mon, 23 Aug 2004 16:31:30 -0500, "Bob Schmall" <[email protected]>
>wrote:
>>
>> >George:
>> >Epoxy is one, Gorilla Glue is another. If you use the latter, be sure to
>> >read the directions even if that threatens your manhood. 8-)
>> >
>> both will only work so so. goop will do a great job. that will make a bond
>that
>> the material will break before the joint.
>
>Steve:
>You could be right but why are first two "so so?" Please explain why goop
>is better.
>
>Bob
>
yeah... and what's goop?