After 127 years, we are no longer making our wood blocks so, I'm selling off
most of my machines. (I just can't part with everything) I know what we
paid for these and I know what they cost to maintain and I think they are
well below market value. It's the sad end of an era but I need the
floorspace and a new Bridgeport. Please excuse the blatant marketing but
something here just might be what somebody here is praying for and will put
another American to work.
http://search.ebay.com/_W0QQsassZknotbrushQQhtZ-1
This should be a link to the stuff I have listed: 36" bandsaw, 18" cross-cut
saw, rip saw, drill press, moulder. We have processed MILLIONS of
board/feet of Beech.
I'll miss the aroma of fresh sawdust...a LOT!!!
Wood blocks? What kind of wood blocks did you make?
Tom Dacon
"Tom Gardner" <tom(nospam)@ohiobrush.com> wrote in message
news:[email protected]...
> After 127 years, we are no longer making our wood blocks so, I'm selling
> off most of my machines. (I just can't part with everything) I know what
> we paid for these and I know what they cost to maintain and I think they
> are well below market value. It's the sad end of an era but I need the
> floorspace and a new Bridgeport. Please excuse the blatant marketing but
> something here just might be what somebody here is praying for and will
> put another American to work.
>
> http://search.ebay.com/_W0QQsassZknotbrushQQhtZ-1
>
> This should be a link to the stuff I have listed: 36" bandsaw, 18"
> cross-cut saw, rip saw, drill press, moulder. We have processed MILLIONS
> of board/feet of Beech.
>
> I'll miss the aroma of fresh sawdust...a LOT!!!
>
On Sat, 10 Jun 2006 00:37:39 GMT, "Tom Gardner"
<tom(nospam)@ohiobrush.com> wrote:
>
>"Prometheus" <[email protected]> wrote in message
>news:[email protected]...
>> On Fri, 09 Jun 2006 15:42:13 GMT, "Tom Gardner"
>> <tom(nospam)@ohiobrush.com> wrote:
>>
>>>After 127 years, we are no longer making our wood blocks so, I'm selling
>>>off
>>>most of my machines. (I just can't part with everything) I know what we
>>>paid for these and I know what they cost to maintain and I think they are
>>>well below market value. It's the sad end of an era but I need the
>>>floorspace and a new Bridgeport. Please excuse the blatant marketing but
>>>something here just might be what somebody here is praying for and will
>>>put
>>>another American to work.
>>
>> Man, I wish you were closer. Too far for me to tote that kind of
>> iron, though.
>>
>
>No, no...it's REALLY light!
I wish... I was really drooling over that drill press, but it'd cost
twice as much to move it as it would be to buy it in the first place.
On Fri, 09 Jun 2006 15:42:13 GMT, "Tom Gardner"
<tom(nospam)@ohiobrush.com> wrote:
>After 127 years, we are no longer making our wood blocks so, I'm selling off
>most of my machines. (I just can't part with everything) I know what we
>paid for these and I know what they cost to maintain and I think they are
>well below market value. It's the sad end of an era but I need the
>floorspace and a new Bridgeport. Please excuse the blatant marketing but
>something here just might be what somebody here is praying for and will put
>another American to work.
Man, I wish you were closer. Too far for me to tote that kind of
iron, though.
"Prometheus" <[email protected]> wrote in message
news:[email protected]...
> On Sat, 10 Jun 2006 00:37:39 GMT, "Tom Gardner"
> <tom(nospam)@ohiobrush.com> wrote:
>
>>
>>"Prometheus" <[email protected]> wrote in message
>>news:[email protected]...
>>> On Fri, 09 Jun 2006 15:42:13 GMT, "Tom Gardner"
>>> <tom(nospam)@ohiobrush.com> wrote:
>>>
>>>>After 127 years, we are no longer making our wood blocks so, I'm selling
>>>>off
>>>>most of my machines. (I just can't part with everything) I know what
>>>>we
>>>>paid for these and I know what they cost to maintain and I think they
>>>>are
>>>>well below market value. It's the sad end of an era but I need the
>>>>floorspace and a new Bridgeport. Please excuse the blatant marketing
>>>>but
>>>>something here just might be what somebody here is praying for and will
>>>>put
>>>>another American to work.
>>>
>>> Man, I wish you were closer. Too far for me to tote that kind of
>>> iron, though.
>>>
>>
>>No, no...it's REALLY light!
>
> I wish... I was really drooling over that drill press, but it'd cost
> twice as much to move it as it would be to buy it in the first place.
Would you feel better if I wanted more for the machine?
"Juergen Hannappel" <[email protected]> wrote in message
news:[email protected]...
> "Tom Gardner" <tom(nospam)@ohiobrush.com> writes:
>
>
> [...]
>
>> floorspace and a new Bridgeport.
>
> What's a Bridgeport?
A Bridgeport is like a 3 dimensional router for metal with precise control
over all 3 axis. Accuracy is measured in the tenths of thousands of an
inch. (.0001") We build our production machinery and punch-dies in house.
"Juergen Hannappel" <[email protected]> wrote in message
news:[email protected]...
> "Tom Gardner" <tom(nospam)@ohiobrush.com> writes:
>
>
> [...]
>
>> floorspace and a new Bridgeport.
>
> What's a Bridgeport?
>
A city in Connecticut. Damn, they are moving an entire city into the wood
shop?
"Tom Dacon" <[email protected]> wrote in message
news:[email protected]...
> Wood blocks? What kind of wood blocks did you make?
>
> Tom Dacon
We make wire brushes, about 400 SKUs I now buy the parts from an Amish mill
that supplies a number of manufacturers. See my stuff at
http://www.ohiobrush.com/
Verticle milling machine.
"Juergen Hannappel" <[email protected]> wrote in message
news:[email protected]...
> What's a Bridgeport?
>
"Prometheus" <[email protected]> wrote in message
news:[email protected]...
> On Fri, 09 Jun 2006 15:42:13 GMT, "Tom Gardner"
> <tom(nospam)@ohiobrush.com> wrote:
>
>>After 127 years, we are no longer making our wood blocks so, I'm selling
>>off
>>most of my machines. (I just can't part with everything) I know what we
>>paid for these and I know what they cost to maintain and I think they are
>>well below market value. It's the sad end of an era but I need the
>>floorspace and a new Bridgeport. Please excuse the blatant marketing but
>>something here just might be what somebody here is praying for and will
>>put
>>another American to work.
>
> Man, I wish you were closer. Too far for me to tote that kind of
> iron, though.
>
No, no...it's REALLY light!
"Tom Gardner" <tom(nospam)@ohiobrush.com> writes:
[...]
> floorspace and a new Bridgeport.
What's a Bridgeport?
--
Dr. Juergen Hannappel http://lisa2.physik.uni-bonn.de/~hannappe
mailto:[email protected] Phone: +49 228 73 2447 FAX ... 7869
Physikalisches Institut der Uni Bonn Nussallee 12, D-53115 Bonn, Germany
CERN: Phone: +412276 76461 Fax: ..77930 Bat. 892-R-A13 CH-1211 Geneve 23