Yesterday's airing of the WoodWright's Shop showed the process of making a =
3 legged stool (chair, seating). They commented on the history of 3 legge=
d seating, being a standard long time ago, about 1300s - 1600s, I think it =
was.=20
About 25-30 yrs ago, I saw a 3 legged chair in a museum and thought "What's=
so special about that? I can build that. Simple geometry!"=20
I had taken pics of the museum chair, but don't have them anymore. That ch=
air's base framing looked similar to this one: http://metmuseum.org/colle=
ctions/search-the-collections/191251=20
Also, the chair I saw didn't have armrests and had a one-board backrest.
The WoodWright project construction was similar to the museum chair I had s=
een.
When I returned from the museum trip, I tried to build a 3 legged chair (no=
supplied plans). It wasn't as easy as I thought. I made 3 sets of legs, =
before the 4th set was almost correct. I don't think my using tree limbs (=
raw, non-milled lumber) was the problem, either. Though my woodworking sk=
ills were not advanced, I certainly didn't think this project was that tech=
nically difficult, until I tried it. I realized THAT chair and similar mus=
eum pieces are in the museums for a reason.
I still have the chair I made, stashed in the barn. The seat is rope weavi=
ng, as back then I was practicing & learning how to weave rush, cane, etc. =
and I took this opportunity to practice this weaving technique. I had the =
rope handy, at the time. I've never replaced the rope with something more =
suitable.
http://www.flickr.com/photos/43836144@N04/sets/72157636151944475/
This was a good learning project for me, back then.... learning the hard wa=
y? The WoodWright episode brought back the memories of my building, tackli=
ng the 3 legged chair project. I would encourage all to try a 3 legged ch=
air or stool, as this, without a set of plans, i.e, you figure it out.
Sonny
On 10/3/2013 11:51 AM, Sonny wrote:
> Yesterday's airing of the WoodWright's Shop showed the process of making a 3 legged stool (chair, seating). They commented on the history of 3 legged seating, being a standard long time ago, about 1300s - 1600s, I think it was.
>
> About 25-30 yrs ago, I saw a 3 legged chair in a museum and thought "What's so special about that? I can build that. Simple geometry!"
>
> I had taken pics of the museum chair, but don't have them anymore. That chair's base framing looked similar to this one: http://metmuseum.org/collections/search-the-collections/191251
> Also, the chair I saw didn't have armrests and had a one-board backrest.
>
> The WoodWright project construction was similar to the museum chair I had seen.
>
> When I returned from the museum trip, I tried to build a 3 legged chair (no supplied plans). It wasn't as easy as I thought. I made 3 sets of legs, before the 4th set was almost correct. I don't think my using tree limbs (raw, non-milled lumber) was the problem, either. Though my woodworking skills were not advanced, I certainly didn't think this project was that technically difficult, until I tried it. I realized THAT chair and similar museum pieces are in the museums for a reason.
>
> I still have the chair I made, stashed in the barn. The seat is rope weaving, as back then I was practicing & learning how to weave rush, cane, etc. and I took this opportunity to practice this weaving technique. I had the rope handy, at the time. I've never replaced the rope with something more suitable.
> http://www.flickr.com/photos/43836144@N04/sets/72157636151944475/
>
> This was a good learning project for me, back then.... learning the hard way?
The WoodWright episode brought back the memories of my building, tackling
the 3 legged chair project. I would encourage all to try a 3 legged
chair
or stool, as this, without a set of plans, i.e, you figure it out.
>
> Sonny
>
I am always amazed by the old techniques that are used on the Wood
wright's Shop.
Watching him built a large timber building, makes me want make one also.
The closes I get to that is mortising the parts of a mailbox post
together.
I still am remember the one project where he split two 2X8 out of an 8
inch log. No saw just axe and wedges.
"Sonny" <[email protected]> wrote in message
news:[email protected]
> Yesterday's airing of the WoodWright's Shop showed the
> process of making a 3 legged stool (chair, seating).
> They commented on the history of 3 legged seating, being
> a standard long time ago, about 1300s - 1600s, I think it
> was.
The nice things about three legs - be they table or chair or whatever - is
that they are always stable; i.e., all three legs are always on the floor
regardless of leg length or unevenness of the floor.
--
dadiOH
____________________________
Winters getting colder? Tired of the rat race?
Taxes out of hand? Maybe just ready for a change?
Check it out... http://www.floridaloghouse.net