I have a 4x4 workbench made from 2 sheets of 3/4 ply. I just use it for a
convenient flat surface for glue-ups and dry fits and stuff. I set it on a
couple saw horses when I need to use it.
Its becoming to0 heavy to lift and move around the shop for me now.
Are there plans for a folding workbench? I could use my current top if I
could put some folding legs on it so that I could drop and lock one legs on
one side that lift the bench and drop and lock the other legs. That way it
would be so heavy to haul up in the air to set on saw horses. Maybe there
is a mechanism that one can buy that uses 2x4 for legs? I dont need a
beefy sturdy set up as it just do glue-ups on it.
Any thoughts appreciated.
thanks
Try these trs....
Wall Mounted Folding Workbench, at
http://www.buildeazy.com/newplans/wall_bench.html
Folding Workbench at
http://www.rd.com/familyhandyman/content/18265
Fold Down Workbench at
http://www.diynetwork.com/diy/hi_tools/article/0,2037,DIY_13936_3927170,00.html
Fold Down Workstation at
http://www.shopnotes.com/issues/072/extras/fold-down-workstation/
Fold Down Workbench at
http://www.workbenchmagazine.com/main/pdf/wrkbenchcut.pdf
Knockdown Workbench at
http://www.rd.com/familyhandyman/content/17840
Knock Down Workbench Plans at
http://www.woodcraft.com/AffiliateWiz/aw.aspx?B=12&A=62&Task=Click&TargetURL=http%3a%2f%2fwww.woodcraft.com%2farticles.aspx%3farticleid%3d352
Collapsible Workbench at
http://www.rd.com/americanwoodworker/articles/199912/table/index.html
All the best
Barry
www.woodworking.wizkids.co.uk
trs80 wrote:
| I have a 4x4 workbench made from 2 sheets of 3/4 ply. I just use
| it for a convenient flat surface for glue-ups and dry fits and
| stuff. I set it on a couple saw horses when I need to use it.
|
| Its becoming to0 heavy to lift and move around the shop for me now.
|
| Are there plans for a folding workbench? I could use my current
| top if I could put some folding legs on it so that I could drop and
| lock one legs on one side that lift the bench and drop and lock the
| other legs. That way it would be so heavy to haul up in the air to
| set on saw horses. Maybe there is a mechanism that one can buy
| that uses 2x4 for legs? I dont need a beefy sturdy set up as it
| just do glue-ups on it.
|
| Any thoughts appreciated.
You might adapt my tilting shop cart design to produce a table that'll
lock in either vertical or horizontal - and can be rolled out of the
way for storage. There're photos at the link below.
--
Morris Dovey
DeSoto Solar
DeSoto, Iowa USA
http://www.iedu.com/DeSoto/
trs80 wrote:
| I have a 4x4 workbench made from 2 sheets of 3/4 ply. I just use
| it for a convenient flat surface for glue-ups and dry fits and
| stuff. I set it on a couple saw horses when I need to use it.
|
| Its becoming to0 heavy to lift and move around the shop for me now.
|
| Are there plans for a folding workbench? I could use my current
| top if I could put some folding legs on it so that I could drop and
| lock one legs on one side that lift the bench and drop and lock the
| other legs. That way it would be so heavy to haul up in the air to
| set on saw horses. Maybe there is a mechanism that one can buy
| that uses 2x4 for legs? I dont need a beefy sturdy set up as it
| just do glue-ups on it.
|
| Any thoughts appreciated.
| thanks
You might adapt my tilting shop cart design to produce a table that'll
lock in either vertical or horizontal - and can be rolled out of the
way for storage. There're photos at the link below.
--
Morris Dovey
DeSoto Solar
DeSoto, Iowa USA
http://www.iedu.com/DeSoto/shop_cart.html
lots of tremendous ideas.....Thanks so much!
"trs80" <[email protected]> wrote in message
news:[email protected]...
>I have a 4x4 workbench made from 2 sheets of 3/4 ply. I just use it for a
>convenient flat surface for glue-ups and dry fits and stuff. I set it on a
>couple saw horses when I need to use it.
>
> Its becoming to0 heavy to lift and move around the shop for me now.
>
> Are there plans for a folding workbench? I could use my current top if I
> could put some folding legs on it so that I could drop and lock one legs
> on one side that lift the bench and drop and lock the other legs. That
> way it would be so heavy to haul up in the air to set on saw horses.
> Maybe there is a mechanism that one can buy that uses 2x4 for legs? I
> dont need a beefy sturdy set up as it just do glue-ups on it.
>
> Any thoughts appreciated.
> thanks
>
"Morris Dovey" <[email protected]> wrote in news:46593144$0$490$815e3792
@news.qwest.net:
> trs80 wrote:
>| I have a 4x4 workbench made from 2 sheets of 3/4 ply. I just use
>| it for a convenient flat surface for glue-ups and dry fits and
>| stuff. I set it on a couple saw horses when I need to use it.
>|
>| Its becoming to0 heavy to lift and move around the shop for me now.
>|
>| Are there plans for a folding workbench? I could use my current
>| top if I could put some folding legs on it so that I could drop and
>| lock one legs on one side that lift the bench and drop and lock the
>| other legs. That way it would be so heavy to haul up in the air to
>| set on saw horses. Maybe there is a mechanism that one can buy
>| that uses 2x4 for legs? I dont need a beefy sturdy set up as it
>| just do glue-ups on it.
>|
>| Any thoughts appreciated.
>| thanks
>
> You might adapt my tilting shop cart design to produce a table that'll
> lock in either vertical or horizontal - and can be rolled out of the
> way for storage. There're photos at the link below.
>
> --
> Morris Dovey
> DeSoto Solar
> DeSoto, Iowa USA
> http://www.iedu.com/DeSoto/shop_cart.html
>
The other solution is to build a similar frame as a table support and
attach it to a set of folding table legs (from a 2006 Harbor Freight ad:
<http://bfads.net/pop/2452>)
The dimensions of my frame are such that a 4x8 sheet extends on all
sides. I got the idea off some web page as a saw table for using a
circular saw to cut large sheet goods down to approximate size before
bringing them down to the basement shop. I have an old pdf from Fine
Woodworking that shows a table like this, but can't find a more detailed
description anymore. It is on my computer as a rather lengthy article
entitled "A Circular Saw in the Furniture Shop?"
--
Best regards
Han
email address is invalid