After seeing something recently about adding a small light to a router
(maybe David Marks' show??), I got to thinking about attaching a small
Mag-lite (2-AA cell) light to my PC router. There are two screw holes
available for attaching the edge guide that I could utilize to quickly
attach a holding bracket for the Mag-lite.
Anyone ever run across an even smaller bright light suitable for such
duty?
Got any pics of a light attached to your router? I don't want to attach
it permanently with hot glue, etc. Quick on and off.
Dave
Some small LED light would be bright for close range and compact. I
have a little one on my keyring that has 4 button-cell batteries. Or a
2-AA headlamp might be a more compact design than a maglight. I think
I'd prefer to have better overhead lighting, or maybe a lamp to clamp
on to your work surface, because I think my router points different
directions each time I use it - I wouldn't want to have to worry about
pointing it in the direction of the light. If you get something
figured out, though, let us know - I'd be interested in seeing it.
Andy
David wrote:
> After seeing something recently about adding a small light to a router
> (maybe David Marks' show??), I got to thinking about attaching a small
> Mag-lite (2-AA cell) light to my PC router.
<snip and subsequent gloat>
If you had a 28 year old router like my old Craftsman, you'd already
have a light on your router. It was a standard feature on some models.
Boggles the mind why some of the best ideas are forgotten and ignored.
Tom in KY, My old Craftsman router is NOT for sale BTW.
At one time Craftsman routers had a built in light. They also sold a battery
light that attached to their routers that didn't have a light. It mounted to
the side and the end was at an angle to shine on the bit. I had one not sure
what happened to it since I got rid of all my Craftsman routers.
David <[email protected]> wrote in message
news:[email protected]...
> After seeing something recently about adding a small light to a router
> (maybe David Marks' show??), I got to thinking about attaching a small
> Mag-lite (2-AA cell) light to my PC router. There are two screw holes
> available for attaching the edge guide that I could utilize to quickly
> attach a holding bracket for the Mag-lite.
>
> Anyone ever run across an even smaller bright light suitable for such
> duty?
>
> Got any pics of a light attached to your router? I don't want to attach
> it permanently with hot glue, etc. Quick on and off.
>
> Dave
David wrote:
> After seeing something recently about adding a small light to a router
> (maybe David Marks' show??), I got to thinking about attaching a small
> Mag-lite (2-AA cell) light to my PC router. There are two screw holes
> available for attaching the edge guide that I could utilize to quickly
> attach a holding bracket for the Mag-lite.
>
> Anyone ever run across an even smaller bright light suitable for such duty?
>
> Got any pics of a light attached to your router? I don't want to attach
> it permanently with hot glue, etc. Quick on and off.
>
> Dave
I ordered some stuff from Harbor Fright some months ago and as a reward
for spending money with them, they gave me a head mounted light (no you
don't have to drill any holes). They probably sell them for a couple
bucks.
cheapo,
jo4hn
p.s. It's still in the packaging so I don't really know how effective it is.
"Leon" <[email protected]> wrote in message
news:[email protected]...
>
> "Doug Schultz" <[email protected]> wrote in message
> news:cd4wf.153110$2k.9563@pd7tw1no...
>> shouldnt be that hard to mount a superbright LED with a diode and current
>> limiting resistor so it runs off the 120 volt motor supply.
>> sometimes you can just use clear silicone for mounting.
>> I do lots of things with LED's now. Its my favorite light source.
>
>
> Not trying to be contrary here but besides being easy on electricity
> consumption and not getting very hot, what is the rage with these LED
> lights. They blind you when you look at them but seem to only put out
> minimal light. My brother in-law bought a flash light with 9 LEDs and its
> kinda lights up a dark room. Compared to a simple 2 AA cell MAG light it
> sucks. My wife has a new sewing machine that uses 36 LED lights to shine
> 12" and I can drown all that light out with a simple MAG light. For
> Christmas I was given a combination wear it on your head light that uses 5
> LED lights 3 red, 2 white and 1 regular tiny regular lamp. The tiny
> regular lamp out shines them all. IMHO LED's are bright to look at but
> do not put out much light. Is it a fad thing right now or are the lights
> just being used for everything right now and eventually they will only be
> used for stop lights?
> What do you find them useful for?
well they are way easier on batteries than your mag lite.
you can now get very bright power led's that are easily as bright as
anything else and in a smaller package.
I build custom lighting effects in clear and textured acrylic so I use them
in a lot of custom applications. they have a life span longer than me so I
can build them into things without worrying about how to replace the bulb.
but other than that not very useful.
Doug
>
>
"After seeing something recently about adding a small light to a router
Well the brand everyone loves to hate, Craftsman, had and may still have, a
built in light. My two 40 plus year old Craftsman's have built in work
lights. They are the ones I reach for to do critical work out of five (I
don't like to change bits). Always wonder why the big names, Porter Cable,
for example, never did this.
Walt Conner
"Well yeah, if all you do with it is do a little dainty edge molding once a
month ;-)
The one I bought new has been used thru building two new houses, door hinge
mounting thru building kitchen cabinets for both houses, furniture and
crafts since.
"the lower end Craftsman should either be avoided"
As with most lines and I agree, Craftsman did try to live on their name for
many recent years. It is a mystery how someone could take "The Worlds Best
Company" and turn it into a pile of crape so quickly.
Paid too much for hand tools? I bought several sets of wrenches and a new
1/2" socket set complete, ratchets and all, several years ago because they
were such a good price on sale. Have a set of wrenches in each vehicle plus
a couple in the shop. Haven't even used the socket set except the 1-1/4"
socket which my 60 year old SK set does not have.
Walt Conner
Lobby Dosser wrote:
> David <[email protected]> wrote:
>
>
>>After seeing something recently about adding a small light to a router
>>(maybe David Marks' show??), I got to thinking about attaching a small
>>Mag-lite (2-AA cell) light to my PC router. There are two screw holes
>>available for attaching the edge guide that I could utilize to quickly
>>attach a holding bracket for the Mag-lite.
>>
>>Anyone ever run across an even smaller bright light suitable for such
>>duty?
>>
>>Got any pics of a light attached to your router? I don't want to
>>attach it permanently with hot glue, etc. Quick on and off.
>>
>>Dave
>
>
> How about one of the clip on led lights. Lighter weight and batteries
> last longer. I've got a pair of the Panther Vision clip ons I use on my
> glasses - safety and regular. I think you could clip one or two on a
> router quite easily. Here's the set I have
>
> <http://www.perfectionoptics.com/prd_anywhereclipon2.html>
>
> I paid about $17 for them at Lowes.
>
> LD
That looks like it would work fine. thank you. Gives me a good excuse
to drive to Lowe's (26 miles away...have a HD about 5 blocks away which
is always out of whatever I need, so invariably I go to the next closest
one, about 2 miles away)
Dave
WConner wrote:
> "After seeing something recently about adding a small light to a
> router
>
> Well the brand everyone loves to hate, Craftsman, had and may
> still have, a built in light. My two 40 plus year old Craftsman's
> have built in work lights. They are the ones I reach for to do
> critical work out of five (I don't like to change bits). Always
> wonder why the big names, Porter Cable, for example, never did
> this.
>
> Walt Conner
I had a Craftsman router with a light in it once. Was my first router
and was a gift from my dearly beloved back when she was still
dearly beloved. It got tore up pretty quick as you can imagine. Then I
went out and bought a Porter Cable. No light, but I still use that
router all the time ;-)
Moral of the story? Never buy a router with a light.
Joe Barta
WConner wrote:
> " It got tore up pretty quick as you can imagine"
>
> Always heard some people can tear up a wrecking ball.
Yeah, but *more* people can tear up Craftsman power tools ;-)
Seriously though, the new Craftsman "Industrial" line seems to be
pretty good. I've owned a Dewalt, err, Craftsman Industrial drill for
about 10 years now and routinely use it to the max. Except for a
switch I had to replace early on, it runs like a champ.
> Both my 40
> plus year old Craftsman with light are still working perfectly,
Well yeah, if all you do with it is do a little dainty edge molding
once a month ;-)
I'm just messing with you. Some Craftsman tools are ok. I also have a
Craftsman socket set that I paid way too much for that is holding up
handsomely. You'll have to admit though, when it comes to power tools,
the lower end Craftsman should either be avoided, or used very very
gingerly.
Joe Barta
David <[email protected]> wrote:
> After seeing something recently about adding a small light to a router
> (maybe David Marks' show??), I got to thinking about attaching a small
> Mag-lite (2-AA cell) light to my PC router. There are two screw holes
> available for attaching the edge guide that I could utilize to quickly
> attach a holding bracket for the Mag-lite.
>
> Anyone ever run across an even smaller bright light suitable for such
> duty?
>
> Got any pics of a light attached to your router? I don't want to
> attach it permanently with hot glue, etc. Quick on and off.
>
> Dave
How about one of the clip on led lights. Lighter weight and batteries
last longer. I've got a pair of the Panther Vision clip ons I use on my
glasses - safety and regular. I think you could clip one or two on a
router quite easily. Here's the set I have
<http://www.perfectionoptics.com/prd_anywhereclipon2.html>
I paid about $17 for them at Lowes.
LD
The Leon entity posted thusly:
>Not trying to be contrary here but besides being easy on electricity
>consumption and not getting very hot, what is the rage with these LED
>lights.
Well, those two reasons and 'bulb' life.
>Christmas I was given a combination wear it on your head light that uses 5
>LED lights 3 red, 2 white and 1 regular tiny regular lamp. The tiny regular
>lamp out shines them all. IMHO LED's are bright to look at but do not put
>out much light. Is it a fad thing right now or are the lights just being
>used for everything right now and eventually they will only be used for stop
>lights?
>What do you find them useful for?
I have the same head-light, and I find it to be one of the most useful
lights I own. The red is perfect for not destroying my night vision,
though it could be a tad less bright, and still serve the purpose.
The white LED setting is perfect for those times when I go outside for
a few chores at night. Around here, if there's no moon, you can't find
your bum with both hands, and the white LEDs are more than enough to
keep me from tripping over things.
The same setting is also good for working under sinks or for putting
up shelves in a closet, or whatever. I got the unit over two years
ago, use it a LOT, and have yet to replace the batteries.
shouldnt be that hard to mount a superbright LED with a diode and current
limiting resistor so it runs off the 120 volt motor supply.
sometimes you can just use clear silicone for mounting.
I do lots of things with LED's now. Its my favorite light source.
Doug
"David" <[email protected]> wrote in message
news:[email protected]...
> After seeing something recently about adding a small light to a router
> (maybe David Marks' show??), I got to thinking about attaching a small
> Mag-lite (2-AA cell) light to my PC router. There are two screw holes
> available for attaching the edge guide that I could utilize to quickly
> attach a holding bracket for the Mag-lite.
>
> Anyone ever run across an even smaller bright light suitable for such
> duty?
>
> Got any pics of a light attached to your router? I don't want to attach
> it permanently with hot glue, etc. Quick on and off.
>
> Dave
David <[email protected]> wrote:
: After seeing something recently about adding a small light to a router
: (maybe David Marks' show??), I got to thinking about attaching a small
: Mag-lite (2-AA cell) light to my PC router. There are two screw holes
: available for attaching the edge guide that I could utilize to quickly
: attach a holding bracket for the Mag-lite.
: Anyone ever run across an even smaller bright light suitable for such
: duty?
Lee Valley sells a clipon LED light, intended for use with their
magnifier eyeshade thingie. Small and bright.
-- Andy Barss.
If the light is to be mounted on the body of the router , how about one of
those LED headlamps? You could just slip the headband around the body of
your router.
Gene
"David" <[email protected]> wrote in message
news:[email protected]...
> After seeing something recently about adding a small light to a router
> (maybe David Marks' show??), I got to thinking about attaching a small
> Mag-lite (2-AA cell) light to my PC router. There are two screw holes
> available for attaching the edge guide that I could utilize to quickly
> attach a holding bracket for the Mag-lite.
>
> Anyone ever run across an even smaller bright light suitable for such
> duty?
>
> Got any pics of a light attached to your router? I don't want to attach
> it permanently with hot glue, etc. Quick on and off.
>
> Dave
"Doug Schultz" <[email protected]> wrote in message
news:cd4wf.153110$2k.9563@pd7tw1no...
> shouldnt be that hard to mount a superbright LED with a diode and current
> limiting resistor so it runs off the 120 volt motor supply.
> sometimes you can just use clear silicone for mounting.
> I do lots of things with LED's now. Its my favorite light source.
Not trying to be contrary here but besides being easy on electricity
consumption and not getting very hot, what is the rage with these LED
lights. They blind you when you look at them but seem to only put out
minimal light. My brother in-law bought a flash light with 9 LEDs and its
kinda lights up a dark room. Compared to a simple 2 AA cell MAG light it
sucks. My wife has a new sewing machine that uses 36 LED lights to shine
12" and I can drown all that light out with a simple MAG light. For
Christmas I was given a combination wear it on your head light that uses 5
LED lights 3 red, 2 white and 1 regular tiny regular lamp. The tiny regular
lamp out shines them all. IMHO LED's are bright to look at but do not put
out much light. Is it a fad thing right now or are the lights just being
used for everything right now and eventually they will only be used for stop
lights?
What do you find them useful for?
"Doug Schultz" <[email protected]> wrote:
>shouldnt be that hard to mount a superbright LED with a diode and current
>limiting resistor so it runs off the 120 volt motor supply.
>sometimes you can just use clear silicone for mounting.
>I do lots of things with LED's now. Its my favorite light source.
>
>Doug
Any links to sites that could give me some guidance on this?
Maybe sample circuits, recommended LEDs, etc.?
The only two things that I miss about my old Craftsman router are the
light and the combination lockout for the power switch and shaft lock.
"David" <[email protected]> wrote in message
news:[email protected]...
> After seeing something recently about adding a small light to a router
> (maybe David Marks' show??), I got to thinking about attaching a small
> Mag-lite (2-AA cell) light to my PC router. There are two screw holes
> available for attaching the edge guide that I could utilize to quickly
> attach a holding bracket for the Mag-lite.
>
> Anyone ever run across an even smaller bright light suitable for such
> duty?
>
> Got any pics of a light attached to your router? I don't want to attach
> it permanently with hot glue, etc. Quick on and off.
>
> Dave
Dave,
You need to stop woodworking with the lights off! :)
--
Stoutman
http://home.triad.rr.com/brianmelissa/woodworking_frames.htm
(Featuring a NEW look)
"Doug Schultz" <[email protected]> wrote in message
news:4Pkwf.274908$ki.147770@pd7tw2no...
>>>
> I build custom lighting effects in clear and textured acrylic so I use
> them in a lot of custom applications. they have a life span longer than me
> so I can build them into things without worrying about how to replace the
> bulb.
> but other than that not very useful.
I do see a good use for the as locally in Houston most all traffic stop
lights have been replaced with the LED lights and automobile manufacturers
have been using them for tail lights for 3 or 4 years. Still those are to
be looked at vs. illuminating a distant object.