Bags are typically 30 micron or 5 micron, with a few even smaller.
I understand that a 30 bag will pass fine dust that a 5 bag will catch, but
it is it really noticable over the other dust in the shop? If so, how do
good brands get away with selling 30 bags?
If you are sharp you will pick up that I am trying to rationalize buying a
30 bag, but need to be talked out of it.
Thanks.
>
> If you really want good air inside your shop (and it's not freezing
> outside), why not put the DC outside and not be bothered with filter
> effciency at all? Lumber mills mostly have their DC outside...
> Dr. Juergen Hannappel
\
================================
Actually I have been giving that thought some attention the last week... I
just stuck a 16x6 foot "deck" behing my shop just to use some "stray" but
used lumber that came my way last summer... It seemed to me that adding a
4x4 or so enclosed closet outside on this deck would solve both the dust
problem inside the shop PLUS free up a
a little more space inside (actually more important)...
My wife however is questing me about doing this...because before she retired
she worked in the Lab at an Aluminum manufacturer and their dust collectors
were locsated outside the lab and were constantely being clogged because of
moisture "gumming" up the DC (mostly carbon dust in this case)
Any thoughs on this ?
Bob Griffiths
I'm not sharp, but I can look things up.
30 micron is about 320 grit product.
http://www.taunton.com/finewoodworking/pages/w00006.asp Otherwise 99.44% of
what you produce is larger, and you still have distance from bag, gravity,
and your body defenses besides.
Not to mention the ability to slap on a mask when doing things which make
fine dust.
Advertising often creates a want where no need exists. If you've got the
money, have at it, and use a bunch of duct tape, because dollars to dogturds
you'll get more from leaks than you get from the bag.
If you've got allergies, definitely get the finest filtration for your
collector _and_ your nose, directly.
"Wade Lippman" <[email protected]> wrote in message
news:[email protected]...
> Bags are typically 30 micron or 5 micron, with a few even smaller.
>
> I understand that a 30 bag will pass fine dust that a 5 bag will catch,
but
> it is it really noticable over the other dust in the shop? If so, how do
> good brands get away with selling 30 bags?
>
> If you are sharp you will pick up that I am trying to rationalize buying a
> 30 bag, but need to be talked out of it.
"Wade Lippman" <[email protected]> wrote in message
news:[email protected]...
> Bags are typically 30 micron or 5 micron, with a few even smaller.
>
> I understand that a 30 bag will pass fine dust that a 5 bag will catch,
but
> it is it really noticable over the other dust in the shop? If so, how do
> good brands get away with selling 30 bags?
>
> If you are sharp you will pick up that I am trying to rationalize buying a
> 30 bag, but need to be talked out of it.
>
> Thanks.
>
==============
I have had a Griz 1029 for well over 10 years now ..and I enclosed only the
top bag inside a 1/4 inch plywood box
leaving about 4 inches clearance around the inflated bag
as a method to reduce the dust that went thru the 30 micron bag....4-5 years
ago I did buy a 5 micron bag and honestly I can not tell the difference...
after a few weeks I still have a little duct on the floor below the DC... no
more or no less that I can tell... BUT the "box" seemed to restrict
the amount of dust in the shop in general...
I did not buy the DC for health resons...only to keep the shop a little less
dusty thus more relaxing for me to use...
Bob Griffiths
Wade Lippman <[email protected]> wrote:
: Bags are typically 30 micron or 5 micron, with a few even smaller.
: I understand that a 30 bag will pass fine dust that a 5 bag will catch, but
: it is it really noticable over the other dust in the shop? If so, how do
: good brands get away with selling 30 bags?
: If you are sharp you will pick up that I am trying to rationalize buying a
: 30 bag, but need to be talked out of it.
the really hazardous stuff is sub 1 micron. Large particles your lungs
can clear, but the smallest ones go in there and don't come out.
A 30 or 5 micron bag will make your shop look dustless, and than can be
nice, but isn't going to do much of anything for your health.
Get a bag, or a canister filter plus cyclone, that
can get the finest dust.
-- Andy Barss
Wade,
I use a 1 Micron bag which causes no visible dust in the air when
running, nor can my sniffer detect any "sneezable" stuff after a long
session of dust collecting. Any reason you aren't considering a 1
micron bag, for health and comfort?
dave
Wade Lippman wrote:
> Bags are typically 30 micron or 5 micron, with a few even smaller.
>
> I understand that a 30 bag will pass fine dust that a 5 bag will catch, but
> it is it really noticable over the other dust in the shop? If so, how do
> good brands get away with selling 30 bags?
>
> If you are sharp you will pick up that I am trying to rationalize buying a
> 30 bag, but need to be talked out of it.
>
> Thanks.
>
>
"Wade Lippman" <[email protected]> wrote in message
news:[email protected]...
> Bags are typically 30 micron or 5 micron, with a few even smaller.
>
> I understand that a 30 bag will pass fine dust that a 5 bag will catch,
but
> it is it really noticable over the other dust in the shop? If so, how do
> good brands get away with selling 30 bags?
>
> If you are sharp you will pick up that I am trying to rationalize buying a
> 30 bag, but need to be talked out of it.
>
> Thanks.
>
==============
I have had a Griz 1029 for well over 10 years now ..and I enclosed only the
top bag inside a 1/4 inch plywood box
leaving about 4 inches clearance around the inflated bag
as a method to reduce the dust that went thru the 30 micron bag....4-5 years
ago I did buy a 5 micron bag and honestly I can not tell the difference...
after a few weeks I still have a little duct on the floor below the DC... no
more or no less that I can tell... BUT the "box" seemed to restrict
the amount of dust in the shop in general...
I did not buy the DC for health resons...only to keep the shop a little less
dusty thus more relaxing for me to use...
Bob Griffiths
On Sat, 8 Nov 2003 09:52:17 -0500, "George"
<[email protected]> wrote:
>I'm not sharp, but I can look things up.
>
>30 micron is about 320 grit product.
>http://www.taunton.com/finewoodworking/pages/w00006.asp Otherwise 99.44% of
>what you produce is larger, and you still have distance from bag, gravity,
>and your body defenses besides.
For fine dust, I've found that a good powered air filter and/or dust
mask helps more than small micron bags. Standard small micron bags
seem to cut the flow down quite a bit on non-industrial sized
collectors. The cartridge filters now available have a lot more filter
area, so the flow rate should be kept up and smaller particles can get
grabbed.
One of these days, I'm going to add a cartridge filter to my 2 HP Jet.
I was not happy with a 1 micron top bag.
This is simply my own limited experience.
Barry
On Sat, 8 Nov 2003 15:51:24 -0900, "James Flood" <[email protected]> wrote:
>If you are really serious about capturing all (well nearly all anyway) look
>at the cartridge filter replacements. One off the ww mags did a article
>about them this month. Looks like the way to go to me. Spendy but worth it
>in the long run I think
>
the cartridges for the jet are not all that fine. You really need about .3
microns on the cartridge like I have on my cyclone. but it depends on how much
fine sawdust you make really. tropicals are the worst. when I clean out my
cartridges the dust that comes out is like smoke it floats up. very weird stuff.
"Wade Lippman" <[email protected]> writes:
> Bags are typically 30 micron or 5 micron, with a few even smaller.
>
> I understand that a 30 bag will pass fine dust that a 5 bag will catch, but
> it is it really noticable over the other dust in the shop? If so, how do
> good brands get away with selling 30 bags?
If you really want good air inside your shop (and it's not freezing
outside), why not put the DC outside and not be bothered with filter
effciency at all? Lumber mills mostly have their DC outside...
--
Dr. Juergen Hannappel http://lisa2.physik.uni-bonn.de/~hannappe
mailto:[email protected] Phone: +49 228 73 2447 FAX ... 7869
Physikalisches Institut der Uni Bonn Nussallee 12, D-53115 Bonn, Germany
CERN: Phone: +412276 76461 Fax: ..77930 Bat. 892-R-A13 CH-1211 Geneve 23