As I am getting closer to the end of my kitchen project, I am currently
working on the uppers and have just completed the inside corner cabinet. I
am starting to think about hinges for this two piece door for this unit. As
the unit is a right angle with one door slab will be 12" +/- and the other
14" +/-. When closed will form a 90 degree angle with a full overlay of one
slab to the other, when opened I would like this overlay to be flexible or
movable. I was considering some type of a box type concealed hinge, other
suggestions?
The door(s) will be attached to the face frame with a 1" overlay hinge,
which due to weight of the slabs should have at least 4 hinges (cabinet
height is 36")
SteveA
Thanx, they look like they can definitely work for me
"Swingman" <[email protected]> wrote in message
news:[email protected]...
> SteveA wrote:
>> As I am getting closer to the end of my kitchen project, I am currently
>> working on the uppers and have just completed the inside corner cabinet.
>> I am starting to think about hinges for this two piece door for this
>> unit. As the unit is a right angle with one door slab will be 12" +/- and
>> the other 14" +/-. When closed will form a 90 degree angle with a full
>> overlay of one slab to the other, when opened I would like this overlay
>> to be flexible or movable. I was considering some type of a box type
>> concealed hinge, other suggestions?
>>
>> The door(s) will be attached to the face frame with a 1" overlay hinge,
>> which due to weight of the slabs should have at least 4 hinges (cabinet
>> height is 36")
>
> I've used these before ... take a look:
>
> http://www.rockler.com/tech/RTD10303990AA.pdf
>
>
> --
> www.e-woodshop.net
> Last update: 10/22/08
> KarlC@ (the obvious)
SteveA wrote:
> As I am getting closer to the end of my kitchen project, I am currently
> working on the uppers and have just completed the inside corner cabinet.
> I am starting to think about hinges for this two piece door for this
> unit. As the unit is a right angle with one door slab will be 12" +/-
> and the other 14" +/-. When closed will form a 90 degree angle with a
> full overlay of one slab to the other, when opened I would like this
> overlay to be flexible or movable. I was considering some type of a box
> type concealed hinge, other suggestions?
>
> The door(s) will be attached to the face frame with a 1" overlay hinge,
> which due to weight of the slabs should have at least 4 hinges (cabinet
> height is 36")
I've used these before ... take a look:
http://www.rockler.com/tech/RTD10303990AA.pdf
--
www.e-woodshop.net
Last update: 10/22/08
KarlC@ (the obvious)