All:
I have a Craftsman Professional 14" bandsaw that I cannot find a model
number or serial number for. The saw is fairly new, maybe 3-5 years
old. It was a floor model that I bought on clearance from Sears so it
had no box or documentation. It is a closed stand saw and the only
label it has is on the upper door. It says Craftsman Professional 14"
Band Saw 2-Speed. 1 1/2 HP Maximum Developed. There's some info on the
cutting depth and table. I've gone over the entire saw and I cannot
find a number on it. The only number I see is on the underside of the
table, but that looks like a casting number rather than a model or
serial number. If anyone has this saw or can ID it I'd be very
grateful if you could let me know what the model number is. I've
searched the Sears site, this newsgroup, Google, eBay, etc. but I
can't find the model number. Thanks for any help you can provide.
[email protected] wrote:
> All:
>
> I have a Craftsman Professional 14" bandsaw that I cannot find a
> model
> number or serial number for. The saw is fairly new, maybe 3-5 years
> old. It was a floor model that I bought on clearance from Sears so
> it
> had no box or documentation. It is a closed stand saw and the only
> label it has is on the upper door. It says Craftsman Professional
> 14"
> Band Saw 2-Speed. 1 1/2 HP Maximum Developed. There's some info on
> the
> cutting depth and table. I've gone over the entire saw and I cannot
> find a number on it. The only number I see is on the underside of
> the
> table, but that looks like a casting number rather than a model or
> serial number. If anyone has this saw or can ID it I'd be very
> grateful if you could let me know what the model number is. I've
> searched the Sears site, this newsgroup, Google, eBay, etc. but I
> can't find the model number. Thanks for any help you can provide.
It might help if you put up a photo of it somewhere.
--
--
--John
to email, dial "usenet" and validate
(was jclarke at eye bee em dot net)
[email protected] wrote:
> All:
>
> I have a Craftsman Professional 14" bandsaw that I cannot find a model
> number or serial number for. The saw is fairly new, maybe 3-5 years
> old. It was a floor model that I bought on clearance from Sears so it
> had no box or documentation. It is a closed stand saw and the only
> label it has is on the upper door. It says Craftsman Professional 14"
> Band Saw 2-Speed. 1 1/2 HP Maximum Developed. There's some info on the
> cutting depth and table. I've gone over the entire saw and I cannot
> find a number on it. The only number I see is on the underside of the
> table, but that looks like a casting number rather than a model or
> serial number. If anyone has this saw or can ID it I'd be very
> grateful if you could let me know what the model number is. I've
> searched the Sears site, this newsgroup, Google, eBay, etc. but I
> can't find the model number. Thanks for any help you can provide.
I have a 14" Craftsman bandsaw, but not a closed stand model. The model
number on mine is on the motor. Try checking there.
Wayne