I started phase II of the entertainment nook 4 weeks ago and with the
help of Swingman we slid the completed console into position this morning.
The console had to be IR and sound transparent so that I could hide all
of the electronics. It also had to hide the wiring, provide space for
the front sides and center speaker, storage for CD's DVD and BlueRay
disks and electronics and fill the 8' wide space. It does all of the above.
The back is completely open for ventilation and ease of accessing the
wiring and the top is totally removable and indexed for easy
replacement. The removeable top makes running all of the wiring a
breeze without having to pull the console out.
Oh and Swingman, I think I'm probably going to do a little tweaking of
the cables. ;~)
http://www.flickr.com/photos/lcb11211/10482822316/in/photostream/
http://www.flickr.com/photos/lcb11211/10482827264/in/photostream/
http://www.flickr.com/photos/lcb11211/10483001133/in/photostream/
http://www.flickr.com/photos/lcb11211/10482828156/in/photostream/
-MIKE- <[email protected]> wrote:
> On 10/26/13 9:55 PM, Swingman wrote:
>> Leon <lcb11211@swbelldotnet> wrote:
>>> On 10/26/2013 1:45 AM, Swingman wrote:
>>>> Leon <lcb11211@swbelldotnet> wrote:
>>>>
>>>>> Oh and Swingman, I think I'm probably going to do a little tweaking of the cables. ;~)
>>>>
>>>> Good thing, I had fewer cables in a 32 track recording studio. ;)
>>>>
>>>
>>> I pulled the top and untangled the cables this morning, piece of cake so
>>> to speak. Still lots of cable but no longer a rats nest. LOL
>>
>> Strange thing about cables and audio equipment is that often making the
>> cables all nice and neat will introduce RFI and magnetic interference
>> noises and hum that disappears when the cable is laid in a haphazard, rat's
>> nest.
>>
>
> Now you're reminding me of my old job. I did hundreds of installations
> and there are some you can bundle an some you can't. That's one reason
> pro cable costs so much and is so thick, due to the 100+% shielding an
> balancing.
>
> Some of the mic cable I used to use, I could lay parallel to AC cords
> with zero 60 cycle hum, as long as all the grounding was correct. But
> that's some expensive stuff and knowledgeable installation. Most home
> instals are better with the rats nest. :-)
Yep, thousands and thousands in equipment with balanced inputs and outputs,
balanced TRS patch cords, and high dollar shielded cables; and the only
thing that will stop a guitar player's amp from humming in Bb on a tune in
A is a .49 cent ground lift adapter. ;)
--
www.ewoodshop.com (Mobile)
Leon <lcb11211@swbelldotnet> wrote:
> On 10/26/2013 1:45 AM, Swingman wrote:
>> Leon <lcb11211@swbelldotnet> wrote:
>>
>>> Oh and Swingman, I think I'm probably going to do a little tweaking of the cables. ;~)
>>
>> Good thing, I had fewer cables in a 32 track recording studio. ;)
>>
>
> I pulled the top and untangled the cables this morning, piece of cake so
> to speak. Still lots of cable but no longer a rats nest. LOL
Strange thing about cables and audio equipment is that often making the
cables all nice and neat will introduce RFI and magnetic interference
noises and hum that disappears when the cable is laid in a haphazard, rat's
nest.
--
www.ewoodshop.com (Mobile)
"Lew Hodgett" <[email protected]> wrote:
> "Leon" wrote:
>
>> I started phase II of the entertainment nook 4 weeks ago and with the
>> help of Swingman we slid the completed console into position this
>> morning.
> ---------------------------------------------------
> Another hash mark in the well done bucket.
>
> Lew
Muchie Garcia Lew! :-)
"dadiOH" <[email protected]> wrote:
> "Leon" <lcb11211@swbelldotnet> wrote in message
> news:[email protected]
>> I started phase II of the entertainment nook 4 weeks ago
>> and with the help of Swingman we slid the completed console into
>> position this morning.
>
> It looks great, Leon. Tres chic. And I'm sure it is as good functionally
> as it is esthetically.
Thank you
On 10/26/2013 9:30 PM, [email protected] wrote:
> On Sat, 26 Oct 2013 20:29:38 -0500, Leon <lcb11211@swbelldotnet>
> wrote:
>
>> On 10/26/2013 7:40 PM, Lee Michaels wrote:
>>>
>>>
>>> "Leon" <lcb11211@swbelldotnet> wrote
>>>>
>>>> The SawStop brand hydraulic mobile base rolls so freely that if you
>>>> don't lower the saw after moving it, it will likely roll out into the
>>>> drive way if you are not careful, and that base is supporting close to
>>>> 700 lbs.
>>>>
>>> I have this image in my head of Leon running down the street after a run
>>> away SawStop saw. LOL
>>>
>>>
>>>
>> Me too! LOL. Actually I have envisioned it rolling off the ledge at
>> the garage door on to the driveway. That is about a 1.25" drop and
>> would be tough to lift back to garage level.
>
> You'd be surprised how easy it would be to get back up something that
> small. I thought I'd have all sorts of problems getting my Unisaur
> off the shipping pallet. No problems at all. I had no problems
> moving it from my other house into this one, alone. A couple of 2x10
> ramps, a couple of sheets of plywood, and a UHaul trailer did the job
> with no problems. The 2x10s are about the same height as your garage
> lip and that was the easy part. Levers and inclined planes are
> wonderful things. Don't leave Cheops without them. ;-)
>
Swingman and I tackled that lip 3 years ago with all of my equipment. I
did not say that it would be impossible, it would be q hell of a lot
more trouble to get it back up there than if I simply did not let it
happen in the first place.
On 10/26/2013 1:45 AM, Swingman wrote:
> Leon <lcb11211@swbelldotnet> wrote:
>
>> Oh and Swingman, I think I'm probably going to do a little tweaking of the cables. ;~)
>
> Good thing, I had fewer cables in a 32 track recording studio. ;)
>
I pulled the top and untangled the cables this morning, piece of cake so
to speak. Still lots of cable but no longer a rats nest. LOL
"Leon" wrote ...
> I started phase II of the entertainment nook 4 weeks ago and with the help
> of Swingman we slid the completed console into position this morning.
>
Looks good Leon. Elegant and classy. It will be real easy to watch the
game on that baby.
Just wondering though, where did you hide the bar in this thing? ;-)
"Leon" <lcb11211@swbelldotnet> wrote
>
> The SawStop brand hydraulic mobile base rolls so freely that if you don't
> lower the saw after moving it, it will likely roll out into the drive way
> if you are not careful, and that base is supporting close to 700 lbs.
>
I have this image in my head of Leon running down the street after a run
away SawStop saw. LOL
Leon <lcb11211@swbelldotnet> wrote in
news:[email protected]:
> Me too! LOL. Actually I have envisioned it rolling off the ledge at
> the garage door on to the driveway. That is about a 1.25" drop and
> would be tough to lift back to garage level.
You need a SawStop Stop.
Later versions will detect contact with the SawStop and fire a brake to
keep you safe.
Puckdropper
--
Make it to fit, don't make it fit.
Swingman wrote:
> Strange thing about cables and audio equipment is that often making
> the
> cables all nice and neat will introduce RFI and magnetic
> interference
> noises and hum that disappears when the cable is laid in a
> haphazard, rat's
> nest.
--------------------------------------------------------------------
Makes perfect sense.
When cables are parallel to one another the RFI, etc will "couple"
with one another if the parallel length is long enough.
If the cables are at angles to one another, the "couple" length will
be minimum.
IOW, cluttered cable runs represent good engineering practice.
Lew
On 10/25/2013 6:28 PM, [email protected] wrote:
> On Fri, 25 Oct 2013 17:31:54 -0500, Leon <lcb11211@swbelldotnet>
>> The console had to be IR and sound transparent so that I could hide all
>> of the electronics. It also had to hide the wiring, provide space for
>> the front sides and center speaker, storage for CD's DVD and BlueRay
>> disks and electronics and fill the 8' wide space. It does all of the above.
>
> Really nice. One question though, are you concerned at all by all the
> electronics going into the cabinet causing heat? I was and put in a
> 12v transformer and several quiet fans to dissipate it.
>
Not at all concerned about the heat. The Amp/tuner is about 20 years
old and has been in a less favorable environment for all of those 20
years. It was in a much smaller confined compartment with solid glass
doors.
On 10/26/2013 9:02 AM, Michael wrote:
> On Friday, October 25, 2013 5:31:54 PM UTC-5, Leon wrote:
>> I started phase II of the entertainment nook 4 weeks ago and with the
>>
>> help of Swingman we slid the completed console into position this morning.
>>
>>
>>
>> The console had to be IR and sound transparent so that I could hide all
>>
>> of the electronics. It also had to hide the wiring, provide space for
>>
>> the front sides and center speaker, storage for CD's DVD and BlueRay
>>
>> disks and electronics and fill the 8' wide space. It does all of the above.
>>
>>
>>
>> The back is completely open for ventilation and ease of accessing the
>>
>> wiring and the top is totally removable and indexed for easy
>>
>> replacement. The removeable top makes running all of the wiring a
>>
>> breeze without having to pull the console out.
>>
>>
>>
>> Oh and Swingman, I think I'm probably going to do a little tweaking of
>>
>> the cables. ;~)
>>
>>
>>
>> http://www.flickr.com/photos/lcb11211/10482822316/in/photostream/
>>
>>
>>
>> http://www.flickr.com/photos/lcb11211/10482827264/in/photostream/
>>
>>
>>
>> http://www.flickr.com/photos/lcb11211/10483001133/in/photostream/
>>
>>
>>
>> http://www.flickr.com/photos/lcb11211/10482828156/in/photostream/
>
> Looks terrific! What kind of wood did you use?
>
> Mike
>
Thank you Mike.
I used lots of scraps. LOL
The top and ends/sides are 3/4" walnut plywood. The top is trimmed with
solid walnut and the doors are solid walnut. All black painted parts
are oak, basically the front and back face frames, end trim pieces, and
top perimeter border. The top perimeter border keeps things from
rolling off the sides or back and hides the cables hanging down behind
the walnut wall panels. I used a black milk paint with a gel varnish as
a top coat. The single floating shelf, its supports, and the bottom of
the cabinet are 3/4" paint grade maple plywood. The grill frames are
1/2" Baltic birch plywood as are the 6 internal drawers.
On 10/26/2013 10:37 AM, Casper wrote:
> Looks awesome! Super nice job. I would be proud to have an
> entertainment wall like that in my house.
> `Casper
>
>
>> I started phase II of the entertainment nook 4 weeks ago and with the
>> help of Swingman we slid the completed console into position this morning.
>>
>> The console had to be IR and sound transparent so that I could hide all
>> of the electronics. It also had to hide the wiring, provide space for
>> the front sides and center speaker, storage for CD's DVD and BlueRay
>> disks and electronics and fill the 8' wide space. It does all of the above.
>>
>> The back is completely open for ventilation and ease of accessing the
>> wiring and the top is totally removable and indexed for easy
>> replacement. The removeable top makes running all of the wiring a
>> breeze without having to pull the console out.
>>
>> Oh and Swingman, I think I'm probably going to do a little tweaking of
>> the cables. ;~)
>>
>> http://www.flickr.com/photos/lcb11211/10482822316/in/photostream/
>>
>> http://www.flickr.com/photos/lcb11211/10482827264/in/photostream/
>>
>> http://www.flickr.com/photos/lcb11211/10483001133/in/photostream/
>>
>> http://www.flickr.com/photos/lcb11211/10482828156/in/photostream/
>> Leon
Thank you Casper, my wife is happy. ;~)
On Sunday, October 27, 2013 8:59:24 PM UTC-5, Mike Marlow wrote:
> You seem to have a hard on for Leon having bought a SawStop. Just why in the hell is that? -- -Mike-
I thought it was obvious that I was simply being facitious, with the references to beer, boudin and electrical cords. It's not uncommon for me to, sometimes, fail at attempting a little humor. I guess the attempt was misplaced.
Sonny
On 10/26/2013 8:21 AM, [email protected] wrote:
>> "Leon" <lcb11211@swbelldotnet> wrote in message
>>> I started phase II of the entertainment nook 4 weeks ago
>>> and with the help of Swingman we slid the completed console into
>>> position this morning.
>
> Meant to ask, how's the SawStop doing? Any new revelations about it?
> Has the feeling of being a little safer worn off yet?
>
SawStop is doing great. I still question the use of a glossy black
right extension table as far as appearances go however it is slick with
little friction. I guess that would be a trade off for those concerned
about appearances vs. function, I'm not.
I always enjoyed my old Jet cabinet saw but start up with this thing,
compared to the Jet, is drastically improved. It does not start up
quite as quickly as the Jet but boy is it smooooooth. The Jet tended to
explode to instant full speed. The SawStop takes about a quarter second
to come up to speed. I suspect that it has something to do with two
belts and 3 pulleys. It also seems to coast down to a stop much more
quickly. Any way the smoothness of the saw gives you a much better
feeling of security and a sense of higher quality.
I have not changed any of my habits, I still respect the spinning blade,
there still are things that can happen that can harm you but the
smoothness of the spinning blade keeps the small loose cut offs from
dancing around near the blade.
Changing the blade brake when changing from a standard sized blade to
the 8" dado set now takes me less time, installing the brake is a touchy
feeley kind of action as it is difficult to see where the round pegs are
suppose to align with the brake, this routine takes 3~4 seconds now.
I still have a difficult time remembering to swing the dust chute door
closed after changing blades.. it is an internal door so either the
right side exterior door has to be opened or the insert removed to verify.
The SawStop brand hydraulic mobile base rolls so freely that if you
don't lower the saw after moving it, it will likely roll out into the
drive way if you are not careful, and that base is supporting close to
700 lbs.
I have yet to use the guard but the splitter is great.
On 10/25/2013 7:37 PM, woodchucker wrote:
> On 10/25/2013 6:31 PM, Leon wrote:
>> I started phase II of the entertainment nook 4 weeks ago and with the
>> help of Swingman we slid the completed console into position this
>> morning.
>>
>> The console had to be IR and sound transparent so that I could hide all
>> of the electronics. It also had to hide the wiring, provide space for
>> the front sides and center speaker, storage for CD's DVD and BlueRay
>> disks and electronics and fill the 8' wide space. It does all of the
>> above.
>>
>> The back is completely open for ventilation and ease of accessing the
>> wiring and the top is totally removable and indexed for easy
>> replacement. The removeable top makes running all of the wiring a
>> breeze without having to pull the console out.
>>
>> Oh and Swingman, I think I'm probably going to do a little tweaking of
>> the cables. ;~)
>>
>> http://www.flickr.com/photos/lcb11211/10482822316/in/photostream/
>>
>> http://www.flickr.com/photos/lcb11211/10482827264/in/photostream/
>>
>> http://www.flickr.com/photos/lcb11211/10483001133/in/photostream/
>>
>> http://www.flickr.com/photos/lcb11211/10482828156/in/photostream/
> Nice job as always.
>
Thank you.
On 10/25/2013 9:40 PM, Lee Michaels wrote:
>
>
> "Leon" wrote ...
>> I started phase II of the entertainment nook 4 weeks ago and with the
>> help
>> of Swingman we slid the completed console into position this morning.
>>
> Looks good Leon. Elegant and classy. It will be real easy to watch the
> game on that baby.
>
> Just wondering though, where did you hide the bar in this thing? ;-)
>
>
>
Where were you during the planing stage? LOL Thanks Lee.
On 10/25/2013 7:28 PM, Doug Winterburn wrote:
> On Fri, 25 Oct 2013 17:31:54 -0500, Leon <lcb11211@swbelldotnet> wrote:
>> I started phase II of the entertainment nook 4 weeks ago and with
> the
>> help of Swingman we slid the completed console into position this
> morning.
>
>
>> The console had to be IR and sound transparent so that I could hide
> all
>> of the electronics. It also had to hide the wiring, provide space
> for
>> the front sides and center speaker, storage for CD's DVD and
> BlueRay
>> disks and electronics and fill the 8' wide space. It does all of
> the above.
>
>
>> The back is completely open for ventilation and ease of accessing
> the
>> wiring and the top is totally removable and indexed for easy
>> replacement. The removeable top makes running all of the wiring a
>> breeze without having to pull the console out.
>
>
>> Oh and Swingman, I think I'm probably going to do a little tweaking
> of
>> the cables. ;~)
>
>
>> http://www.flickr.com/photos/lcb11211/10482822316/in/photostream/
>
>
>> http://www.flickr.com/photos/lcb11211/10482827264/in/photostream/
>
>
>> http://www.flickr.com/photos/lcb11211/10483001133/in/photostream/
>
>
>> http://www.flickr.com/photos/lcb11211/10482828156/in/photostream/
>
> You've outdone your self!
>
> -Doug
Thank you Mike, it was a mixed bag of emotions, I was not really ready
to build it as it was to come befor the new TV. :~)
Thank you Jim
On 10/29/2013 8:57 PM, Jim wrote:
> Wow Leon. Its beautiful. I just repurposed an old dresser : )
>
>
> On Friday, October 25, 2013 5:31:54 PM UTC-5, Leon wrote:
>> I started phase II of the entertainment nook 4 weeks ago and with the
>>
>> help of Swingman we slid the completed console into position this morning.
>>
>>
>>
>> The console had to be IR and sound transparent so that I could hide all
>>
>> of the electronics. It also had to hide the wiring, provide space for
>>
>> the front sides and center speaker, storage for CD's DVD and BlueRay
>>
>> disks and electronics and fill the 8' wide space. It does all of the above.
>>
>>
>>
>> The back is completely open for ventilation and ease of accessing the
>>
>> wiring and the top is totally removable and indexed for easy
>>
>> replacement. The removeable top makes running all of the wiring a
>>
>> breeze without having to pull the console out.
>>
>>
>>
>> Oh and Swingman, I think I'm probably going to do a little tweaking of
>>
>> the cables. ;~)
>>
>>
>>
>> http://www.flickr.com/photos/lcb11211/10482822316/in/photostream/
>>
>>
>>
>> http://www.flickr.com/photos/lcb11211/10482827264/in/photostream/
>>
>>
>>
>> http://www.flickr.com/photos/lcb11211/10483001133/in/photostream/
>>
>>
>>
>> http://www.flickr.com/photos/lcb11211/10482828156/in/photostream/
>
On 10/26/2013 6:52 PM, [email protected] wrote:
> On Sat, 26 Oct 2013 10:52:18 -0500, Leon <lcb11211@swbelldotnet>
>> I pulled the top and untangled the cables this morning, piece of cake so
>> to speak. Still lots of cable but no longer a rats nest. LOL
>
> I assume you've investigate various means of taming that rat's nest,
> but in case you haven't seen it, Lee Valley has this type of wiring
> control.
> http://www.leevalley.com/en/hardware/page.aspx?p=65570&cat=3,43597,50658
>
Actually I really don't care what the wiring looks like, it is not
visible unless I remove the top of the cabinet or open the doors. As
long as I can easily add, subtract, or reroute any of the cables I have
accomplished what I set out to do.
There was initially a rats nest because I basically did not unplug any
cables when placing the electronics in the new cabinet and all of the
electronics are now located in a different order.
On 10/26/2013 11:36 AM, -MIKE- wrote:
> On 10/25/13 5:31 PM, Leon wrote:
>> I started phase II of the entertainment nook 4 weeks ago and with the
>> help of Swingman we slid the completed console into position this
>> morning.
>>
>> The console had to be IR and sound transparent so that I could hide all
>> of the electronics. It also had to hide the wiring, provide space for
>> the front sides and center speaker, storage for CD's DVD and BlueRay
>> disks and electronics and fill the 8' wide space. It does all of the
>> above.
>>
>> The back is completely open for ventilation and ease of accessing the
>> wiring and the top is totally removable and indexed for easy
>> replacement. The removeable top makes running all of the wiring a
>> breeze without having to pull the console out.
>>
>> Oh and Swingman, I think I'm probably going to do a little tweaking of
>> the cables. ;~)
>>
>> http://www.flickr.com/photos/lcb11211/10482822316/in/photostream/
>>
>> http://www.flickr.com/photos/lcb11211/10482827264/in/photostream/
>>
>> http://www.flickr.com/photos/lcb11211/10483001133/in/photostream/
>>
>> http://www.flickr.com/photos/lcb11211/10482828156/in/photostream/
>
>
> Gorgeous, as usual. Great scale and proportion as well.
>
>
Thank you Mike, the void is filled! ;~)
On 10/25/2013 6:31 PM, Leon wrote:
> I started phase II of the entertainment nook 4 weeks ago and with the
> help of Swingman we slid the completed console into position this morning.
>
> The console had to be IR and sound transparent so that I could hide all
> of the electronics. It also had to hide the wiring, provide space for
> the front sides and center speaker, storage for CD's DVD and BlueRay
> disks and electronics and fill the 8' wide space. It does all of the above.
>
> The back is completely open for ventilation and ease of accessing the
> wiring and the top is totally removable and indexed for easy
> replacement. The removeable top makes running all of the wiring a
> breeze without having to pull the console out.
>
> Oh and Swingman, I think I'm probably going to do a little tweaking of
> the cables. ;~)
>
> http://www.flickr.com/photos/lcb11211/10482822316/in/photostream/
>
> http://www.flickr.com/photos/lcb11211/10482827264/in/photostream/
>
> http://www.flickr.com/photos/lcb11211/10483001133/in/photostream/
>
> http://www.flickr.com/photos/lcb11211/10482828156/in/photostream/
Nice job as always.
--
Jeff
On Saturday, October 26, 2013 8:21:09 AM UTC-5, [email protected] wrote:
> > "Leon" <lcb11211@swbelldotnet> wrote in message >> I started phase II of the entertainment nook 4 weeks ago >> and with the help of Swingman we slid the completed console into >> position this morning.
> Meant to ask, how's the SawStop doing? Any new revelations about it?
Bottom line is, he could have done just as excellent a job using the Jet and saved all that Sawstop money for beer and boudin, for when watching that TV.... or for when untangling electrical cords.
Sonny
On Fri, 25 Oct 2013 17:31:54 -0500, Leon <lcb11211@swbelldotnet>
wrote:
> I started phase II of the entertainment nook 4 weeks ago and with
the
> help of Swingman we slid the completed console into position this
morning.
> The console had to be IR and sound transparent so that I could hide
all
> of the electronics. It also had to hide the wiring, provide space
for
> the front sides and center speaker, storage for CD's DVD and
BlueRay
> disks and electronics and fill the 8' wide space. It does all of
the above.
> The back is completely open for ventilation and ease of accessing
the
> wiring and the top is totally removable and indexed for easy
> replacement. The removeable top makes running all of the wiring a
> breeze without having to pull the console out.
> Oh and Swingman, I think I'm probably going to do a little tweaking
of
> the cables. ;~)
> http://www.flickr.com/photos/lcb11211/10482822316/in/photostream/
> http://www.flickr.com/photos/lcb11211/10482827264/in/photostream/
> http://www.flickr.com/photos/lcb11211/10483001133/in/photostream/
> http://www.flickr.com/photos/lcb11211/10482828156/in/photostream/
You've outdone your self!
-Doug
On Friday, October 25, 2013 5:31:54 PM UTC-5, Leon wrote:
> I started phase II of the entertainment nook 4 weeks ago and with the
>
> help of Swingman we slid the completed console into position this morning.
>
>
>
> The console had to be IR and sound transparent so that I could hide all
>
> of the electronics. It also had to hide the wiring, provide space for
>
> the front sides and center speaker, storage for CD's DVD and BlueRay
>
> disks and electronics and fill the 8' wide space. It does all of the above.
>
>
>
> The back is completely open for ventilation and ease of accessing the
>
> wiring and the top is totally removable and indexed for easy
>
> replacement. The removeable top makes running all of the wiring a
>
> breeze without having to pull the console out.
>
>
>
> Oh and Swingman, I think I'm probably going to do a little tweaking of
>
> the cables. ;~)
>
>
>
> http://www.flickr.com/photos/lcb11211/10482822316/in/photostream/
>
>
>
> http://www.flickr.com/photos/lcb11211/10482827264/in/photostream/
>
>
>
> http://www.flickr.com/photos/lcb11211/10483001133/in/photostream/
>
>
>
> http://www.flickr.com/photos/lcb11211/10482828156/in/photostream/
Looks terrific! What kind of wood did you use?
Mike
On Sat, 26 Oct 2013 10:52:18 -0500, Leon <lcb11211@swbelldotnet>
>I pulled the top and untangled the cables this morning, piece of cake so
>to speak. Still lots of cable but no longer a rats nest. LOL
I assume you've investigate various means of taming that rat's nest,
but in case you haven't seen it, Lee Valley has this type of wiring
control.
http://www.leevalley.com/en/hardware/page.aspx?p=65570&cat=3,43597,50658
On Sat, 26 Oct 2013 20:29:38 -0500, Leon <lcb11211@swbelldotnet>
wrote:
>On 10/26/2013 7:40 PM, Lee Michaels wrote:
>>
>>
>> "Leon" <lcb11211@swbelldotnet> wrote
>>>
>>> The SawStop brand hydraulic mobile base rolls so freely that if you
>>> don't lower the saw after moving it, it will likely roll out into the
>>> drive way if you are not careful, and that base is supporting close to
>>> 700 lbs.
>>>
>> I have this image in my head of Leon running down the street after a run
>> away SawStop saw. LOL
>>
>>
>>
>Me too! LOL. Actually I have envisioned it rolling off the ledge at
>the garage door on to the driveway. That is about a 1.25" drop and
>would be tough to lift back to garage level.
You'd be surprised how easy it would be to get back up something that
small. I thought I'd have all sorts of problems getting my Unisaur
off the shipping pallet. No problems at all. I had no problems
moving it from my other house into this one, alone. A couple of 2x10
ramps, a couple of sheets of plywood, and a UHaul trailer did the job
with no problems. The 2x10s are about the same height as your garage
lip and that was the easy part. Levers and inclined planes are
wonderful things. Don't leave Cheops without them. ;-)
Looks awesome! Super nice job. I would be proud to have an
entertainment wall like that in my house.
`Casper
>I started phase II of the entertainment nook 4 weeks ago and with the
>help of Swingman we slid the completed console into position this morning.
>
>The console had to be IR and sound transparent so that I could hide all
>of the electronics. It also had to hide the wiring, provide space for
>the front sides and center speaker, storage for CD's DVD and BlueRay
>disks and electronics and fill the 8' wide space. It does all of the above.
>
>The back is completely open for ventilation and ease of accessing the
>wiring and the top is totally removable and indexed for easy
>replacement. The removeable top makes running all of the wiring a
>breeze without having to pull the console out.
>
>Oh and Swingman, I think I'm probably going to do a little tweaking of
>the cables. ;~)
>
>http://www.flickr.com/photos/lcb11211/10482822316/in/photostream/
>
>http://www.flickr.com/photos/lcb11211/10482827264/in/photostream/
>
>http://www.flickr.com/photos/lcb11211/10483001133/in/photostream/
>
>http://www.flickr.com/photos/lcb11211/10482828156/in/photostream/
>Leon
Wow Leon. Its beautiful. I just repurposed an old dresser : )
On Friday, October 25, 2013 5:31:54 PM UTC-5, Leon wrote:
> I started phase II of the entertainment nook 4 weeks ago and with the
>
> help of Swingman we slid the completed console into position this morning.
>
>
>
> The console had to be IR and sound transparent so that I could hide all
>
> of the electronics. It also had to hide the wiring, provide space for
>
> the front sides and center speaker, storage for CD's DVD and BlueRay
>
> disks and electronics and fill the 8' wide space. It does all of the above.
>
>
>
> The back is completely open for ventilation and ease of accessing the
>
> wiring and the top is totally removable and indexed for easy
>
> replacement. The removeable top makes running all of the wiring a
>
> breeze without having to pull the console out.
>
>
>
> Oh and Swingman, I think I'm probably going to do a little tweaking of
>
> the cables. ;~)
>
>
>
> http://www.flickr.com/photos/lcb11211/10482822316/in/photostream/
>
>
>
> http://www.flickr.com/photos/lcb11211/10482827264/in/photostream/
>
>
>
> http://www.flickr.com/photos/lcb11211/10483001133/in/photostream/
>
>
>
> http://www.flickr.com/photos/lcb11211/10482828156/in/photostream/
On 10/27/2013 7:43 PM, Sonny wrote:
> On Saturday, October 26, 2013 8:21:09 AM UTC-5, [email protected] wrote:
>>> "Leon" <lcb11211@swbelldotnet> wrote in message >> I started phase II of the entertainment nook 4 weeks ago >> and with the help of Swingman we slid the completed console into >> position this morning.
>> Meant to ask, how's the SawStop doing? Any new revelations about it?
>
> Bottom line is, he could have done just as excellent a job using the Jet and saved all that Sawstop money for beer and boudin, for when watching that TV.... or for when untangling electrical cords.
>
> Sonny
>
Probably but I would not have enjoyed the process as much with the older
saw.
On 10/26/2013 7:40 PM, Lee Michaels wrote:
>
>
> "Leon" <lcb11211@swbelldotnet> wrote
>>
>> The SawStop brand hydraulic mobile base rolls so freely that if you
>> don't lower the saw after moving it, it will likely roll out into the
>> drive way if you are not careful, and that base is supporting close to
>> 700 lbs.
>>
> I have this image in my head of Leon running down the street after a run
> away SawStop saw. LOL
>
>
>
Me too! LOL. Actually I have envisioned it rolling off the ledge at
the garage door on to the driveway. That is about a 1.25" drop and
would be tough to lift back to garage level.
Leon wrote:
> I started phase II of the entertainment nook 4 weeks ago and with the
> help of Swingman we slid the completed console into position this
> morning.
Very nice Leon! Excellent!
--
-Mike-
[email protected]
"Leon" <lcb11211@swbelldotnet> wrote in message
news:[email protected]
> I started phase II of the entertainment nook 4 weeks ago
> and with the help of Swingman we slid the completed console into
> position this morning.
It looks great, Leon. Tres chic. And I'm sure it is as good functionally
as it is esthetically.
--
dadiOH
____________________________
Winters getting colder? Tired of the rat race?
Taxes out of hand? Maybe just ready for a change?
Check it out... http://www.floridaloghouse.net
On 10/25/13 5:31 PM, Leon wrote:
> I started phase II of the entertainment nook 4 weeks ago and with the
> help of Swingman we slid the completed console into position this morning.
>
> The console had to be IR and sound transparent so that I could hide all
> of the electronics. It also had to hide the wiring, provide space for
> the front sides and center speaker, storage for CD's DVD and BlueRay
> disks and electronics and fill the 8' wide space. It does all of the above.
>
> The back is completely open for ventilation and ease of accessing the
> wiring and the top is totally removable and indexed for easy
> replacement. The removeable top makes running all of the wiring a
> breeze without having to pull the console out.
>
> Oh and Swingman, I think I'm probably going to do a little tweaking of
> the cables. ;~)
>
> http://www.flickr.com/photos/lcb11211/10482822316/in/photostream/
>
> http://www.flickr.com/photos/lcb11211/10482827264/in/photostream/
>
> http://www.flickr.com/photos/lcb11211/10483001133/in/photostream/
>
> http://www.flickr.com/photos/lcb11211/10482828156/in/photostream/
Gorgeous, as usual. Great scale and proportion as well.
--
-MIKE-
"Playing is not something I do at night, it's my function in life"
--Elvin Jones (1927-2004)
--
http://mikedrums.com
[email protected]
---remove "DOT" ^^^^ to reply
On 10/26/2013 10:42 PM, Puckdropper wrote:
> Leon <lcb11211@swbelldotnet> wrote in
> news:[email protected]:
>
>> Me too! LOL. Actually I have envisioned it rolling off the ledge at
>> the garage door on to the driveway. That is about a 1.25" drop and
>> would be tough to lift back to garage level.
>
> You need a SawStop Stop.
>
> Later versions will detect contact with the SawStop and fire a brake to
> keep you safe.
>
But you will then have to replace the entire mobile base. :-)
--
Froz...
The system will be down for 10 days for preventive maintenance.
---
This email is free from viruses and malware because avast! Antivirus protection is active.
http://www.avast.com
On 10/26/13 9:55 PM, Swingman wrote:
> Leon <lcb11211@swbelldotnet> wrote:
>> On 10/26/2013 1:45 AM, Swingman wrote:
>>> Leon <lcb11211@swbelldotnet> wrote:
>>>
>>>> Oh and Swingman, I think I'm probably going to do a little tweaking of the cables. ;~)
>>>
>>> Good thing, I had fewer cables in a 32 track recording studio. ;)
>>>
>>
>> I pulled the top and untangled the cables this morning, piece of cake so
>> to speak. Still lots of cable but no longer a rats nest. LOL
>
> Strange thing about cables and audio equipment is that often making the
> cables all nice and neat will introduce RFI and magnetic interference
> noises and hum that disappears when the cable is laid in a haphazard, rat's
> nest.
>
Now you're reminding me of my old job. I did hundreds of installations
and there are some you can bundle an some you can't. That's one reason
pro cable costs so much and is so thick, due to the 100+% shielding an
balancing.
Some of the mic cable I used to use, I could lay parallel to AC cords
with zero 60 cycle hum, as long as all the grounding was correct. But
that's some expensive stuff and knowledgeable installation. Most home
instals are better with the rats nest. :-)
--
-MIKE-
"Playing is not something I do at night, it's my function in life"
--Elvin Jones (1927-2004)
--
http://mikedrums.com
[email protected]
---remove "DOT" ^^^^ to reply
On 10/27/13 2:07 PM, Swingman wrote:
> -MIKE- <[email protected]> wrote:
>> On 10/26/13 9:55 PM, Swingman wrote:
>>> Leon <lcb11211@swbelldotnet> wrote:
>>>> On 10/26/2013 1:45 AM, Swingman wrote:
>>>>> Leon <lcb11211@swbelldotnet> wrote:
>>>>>
>>>>>> Oh and Swingman, I think I'm probably going to do a little tweaking of the cables. ;~)
>>>>>
>>>>> Good thing, I had fewer cables in a 32 track recording studio. ;)
>>>>>
>>>>
>>>> I pulled the top and untangled the cables this morning, piece of cake so
>>>> to speak. Still lots of cable but no longer a rats nest. LOL
>>>
>>> Strange thing about cables and audio equipment is that often making the
>>> cables all nice and neat will introduce RFI and magnetic interference
>>> noises and hum that disappears when the cable is laid in a haphazard, rat's
>>> nest.
>>>
>>
>> Now you're reminding me of my old job. I did hundreds of installations
>> and there are some you can bundle an some you can't. That's one reason
>> pro cable costs so much and is so thick, due to the 100+% shielding an
>> balancing.
>>
>> Some of the mic cable I used to use, I could lay parallel to AC cords
>> with zero 60 cycle hum, as long as all the grounding was correct. But
>> that's some expensive stuff and knowledgeable installation. Most home
>> instals are better with the rats nest. :-)
>
> Yep, thousands and thousands in equipment with balanced inputs and outputs,
> balanced TRS patch cords, and high dollar shielded cables; and the only
> thing that will stop a guitar player's amp from humming in Bb on a tune in
> A is a .49 cent ground lift adapter. ;)
>
Ain't that the truth!
--
-MIKE-
"Playing is not something I do at night, it's my function in life"
--Elvin Jones (1927-2004)
--
http://mikedrums.com
[email protected]
---remove "DOT" ^^^^ to reply
Sonny wrote:
> On Saturday, October 26, 2013 8:21:09 AM UTC-5, [email protected] wrote:
>>> "Leon" <lcb11211@swbelldotnet> wrote in message >> I started phase
>>> II of the entertainment nook 4 weeks ago >> and with the help of
>>> Swingman we slid the completed console into >> position this
>>> morning.
>> Meant to ask, how's the SawStop doing? Any new revelations about it?
>
> Bottom line is, he could have done just as excellent a job using the
> Jet and saved all that Sawstop money for beer and boudin, for when
> watching that TV.... or for when untangling electrical cords.
>
> Sonny
You seem to have a hard on for Leon having bought a SawStop. Just why in
the hell is that?
--
-Mike-
[email protected]
Sonny wrote:
> On Sunday, October 27, 2013 8:59:24 PM UTC-5, Mike Marlow wrote:
>> You seem to have a hard on for Leon having bought a SawStop. Just
>> why in the hell is that? -- -Mike-
>
> I thought it was obvious that I was simply being facitious, with the
> references to beer, boudin and electrical cords. It's not uncommon
> for me to, sometimes, fail at attempting a little humor. I guess the
> attempt was misplaced.
>
Oh - you probably were - It's more like I probably read it with my bad
eye...
--
-Mike-
[email protected]
Quite an entertainment center.
I had made one for my friends and used cane to cover the speaker
panels.
john
"Leon" wrote in message
news:[email protected]...
I started phase II of the entertainment nook 4 weeks ago and with the
help of Swingman we slid the completed console into position this morning.
The console had to be IR and sound transparent so that I could hide all
of the electronics. It also had to hide the wiring, provide space for
the front sides and center speaker, storage for CD's DVD and BlueRay
disks and electronics and fill the 8' wide space. It does all of the above.
The back is completely open for ventilation and ease of accessing the
wiring and the top is totally removable and indexed for easy
replacement. The removeable top makes running all of the wiring a
breeze without having to pull the console out.
Oh and Swingman, I think I'm probably going to do a little tweaking of
the cables. ;~)
http://www.flickr.com/photos/lcb11211/10482822316/in/photostream/
http://www.flickr.com/photos/lcb11211/10482827264/in/photostream/
http://www.flickr.com/photos/lcb11211/10483001133/in/photostream/
http://www.flickr.com/photos/lcb11211/10482828156/in/photostream/
Hello Leon,
I soaked the cane, and then in my routing, stapled and glued it in
place. It dried and tightened up nicely.
I bought the cane from a chair person. Hel told me what I needed to do,
and it worked well.
It makes a very sturdy cover on a cabinet....especially if sealed/painted
or....The people I made it for, painted it white since their home is white
cupboards.
John
"Leon" wrote in message
news:[email protected]...
On 10/30/2013 8:55 AM, jloomis wrote:
> Quite an entertainment center.
> I had made one for my friends and used cane to cover the speaker
> panels.
> john
>
>
Thank you John!
Did you simply place the cane as in the openings or did you soak it in
water and glue it in place?
On 10/26/2013 9:55 PM, Swingman wrote:
> Leon <lcb11211@swbelldotnet> wrote:
>> On 10/26/2013 1:45 AM, Swingman wrote:
>>> Leon <lcb11211@swbelldotnet> wrote:
>>>
>>>> Oh and Swingman, I think I'm probably going to do a little tweaking of the cables. ;~)
>>>
>>> Good thing, I had fewer cables in a 32 track recording studio. ;)
>>>
>>
>> I pulled the top and untangled the cables this morning, piece of cake so
>> to speak. Still lots of cable but no longer a rats nest. LOL
>
> Strange thing about cables and audio equipment is that often making the
> cables all nice and neat will introduce RFI and magnetic interference
> noises and hum that disappears when the cable is laid in a haphazard, rat's
> nest.
>
I know. ;~)
> "Leon" <lcb11211@swbelldotnet> wrote in message
>> I started phase II of the entertainment nook 4 weeks ago
>> and with the help of Swingman we slid the completed console into
>> position this morning.
Meant to ask, how's the SawStop doing? Any new revelations about it?
Has the feeling of being a little safer worn off yet?
On Fri, 25 Oct 2013 17:31:54 -0500, Leon <lcb11211@swbelldotnet>
>The console had to be IR and sound transparent so that I could hide all
>of the electronics. It also had to hide the wiring, provide space for
>the front sides and center speaker, storage for CD's DVD and BlueRay
>disks and electronics and fill the 8' wide space. It does all of the above.
Really nice. One question though, are you concerned at all by all the
electronics going into the cabinet causing heat? I was and put in a
12v transformer and several quiet fans to dissipate it.
On 10/27/2013 8:59 PM, Mike Marlow wrote:
> Sonny wrote:
>> On Saturday, October 26, 2013 8:21:09 AM UTC-5, [email protected] wrote:
>>>> "Leon" <lcb11211@swbelldotnet> wrote in message >> I started phase
>>>> II of the entertainment nook 4 weeks ago >> and with the help of
>>>> Swingman we slid the completed console into >> position this
>>>> morning.
>>> Meant to ask, how's the SawStop doing? Any new revelations about it?
>>
>> Bottom line is, he could have done just as excellent a job using the
>> Jet and saved all that Sawstop money for beer and boudin, for when
>> watching that TV.... or for when untangling electrical cords.
>>
>> Sonny
>
> You seem to have a hard on for Leon having bought a SawStop. Just why in
> the hell is that?
>
I don't think so, what he mentioned is all truthful. ;~) He just left
out the more fun part.
Bottom line, I use my TS quite a bit and have had a few accidents. Use
one enough and something is going to happen. Now I have one less thing
to worry about in the shop.
On 10/30/2013 8:11 PM, jloomis wrote:
> Hello Leon,
> I soaked the cane, and then in my routing, stapled and glued it in
> place. It dried and tightened up nicely.
> I bought the cane from a chair person. Hel told me what I needed to do,
> and it worked well.
> It makes a very sturdy cover on a cabinet....especially if
> sealed/painted or....The people I made it for, painted it white since
> their home is white cupboards.
> John
>
> "Leon" wrote in message
> news:[email protected]...
>
> On 10/30/2013 8:55 AM, jloomis wrote:
>> Quite an entertainment center.
>> I had made one for my friends and used cane to cover the speaker
>> panels.
>> john
>>
>>
> Thank you John!
>
> Did you simply place the cane as in the openings or did you soak it in
> water and glue it in place?
>
Sounds nice. 10~12 years ago I recaned a set of dining room chair
seats. It is/was an involved job but it came out perfectly.