Hi all,
I'm coming over to New Jersey, USA in February and would like to have a
nose in a woodworking store (we call them shops in the UK, but that may
confuse the thought with someone's workshop).
Are there any decent places near Weehawken, NJ? I'm after a couple of
handscrews for definite, but that sort of place. I'd rather avoid the
equivalent of B&Q and Homebase (i.e. consumer places) and go somewhere
that sells decent stuff...
Just more for a nose around really...
Cheers,
Andy
Hmmm. Weehawken is not really the center of the woodworking universe,
but there's a few places you might want to visit if you are willing to
drive a bit, most not exclusively woodworking store type places, but
more tool supply houses - thats all there really is in New Jersey.
Force and AW Meyer are more in the power tool suppy business and don't
really have a deep inventory of high quality hand tools, although I
have purchased many things from both and they certainly have
handscrews. Both have full showrooms of all sorts of powertools and
you could spend an hour or two just poking around and playing with
tablesaws, lathes and shapers. Garrett Wade has a catalog operation,
but also has a small showroom which I spend an hour or so in every
summer when I am in the city, its at 161 Avenue of the Americas in
Manhattan, not all that far from Weehawkin by ferry and some public
transportation. They don't really advertise their showroom, and its
located in a non-descript building - ask the doorman how to find it
inside the building as there are no signs, but if you're in the area
its worth the trip. As you can see from their website, its more of
what you have in mind and they do carry some higher end handtools.
Finally, Woodcraft, which is a franchise of retail stores as well as a
catalog operation, recently opened a store in Allentown, Pennsylvania,
which is about a 2 hour drive from Weehawkin, straight west on
Interstate 78, directions can be had by navigating the website. It,
too, is more what you have in mind as you can see from their website.
Its a bit of a drive, but on a nice day you can see some of the
countryside on the way. See the links below. Bring your money, as the
exchange rate is in your favor nowadays. Good luck.
Mutt.
http://www.forcemachinery.com/
http://www.awmeyer.com/
http://www.garrettwade.com/
http://www.woodcraft.com/
Also in Norwalk CT (about 45 mins, not during rush hour) is Woodwrokers
Warehouse, an affilliate of Woodcraft, not as large a selection but also has
a workshop where you can rent workshop time.
Ken
<[email protected]> wrote in message
news:[email protected]...
> Hmmm. Weehawken is not really the center of the woodworking universe,
> but there's a few places you might want to visit if you are willing to
> drive a bit, most not exclusively woodworking store type places, but
> more tool supply houses - thats all there really is in New Jersey.
> Force and AW Meyer are more in the power tool suppy business and don't
> really have a deep inventory of high quality hand tools, although I
> have purchased many things from both and they certainly have
> handscrews. Both have full showrooms of all sorts of powertools and
> you could spend an hour or two just poking around and playing with
> tablesaws, lathes and shapers. Garrett Wade has a catalog operation,
> but also has a small showroom which I spend an hour or so in every
> summer when I am in the city, its at 161 Avenue of the Americas in
> Manhattan, not all that far from Weehawkin by ferry and some public
> transportation. They don't really advertise their showroom, and its
> located in a non-descript building - ask the doorman how to find it
> inside the building as there are no signs, but if you're in the area
> its worth the trip. As you can see from their website, its more of
> what you have in mind and they do carry some higher end handtools.
> Finally, Woodcraft, which is a franchise of retail stores as well as a
> catalog operation, recently opened a store in Allentown, Pennsylvania,
> which is about a 2 hour drive from Weehawkin, straight west on
> Interstate 78, directions can be had by navigating the website. It,
> too, is more what you have in mind as you can see from their website.
> Its a bit of a drive, but on a nice day you can see some of the
> countryside on the way. See the links below. Bring your money, as the
> exchange rate is in your favor nowadays. Good luck.
>
> Mutt.
>
> http://www.forcemachinery.com/
> http://www.awmeyer.com/
> http://www.garrettwade.com/
> http://www.woodcraft.com/
>
"Ray" <[email protected]> wrote in message
news:[email protected]...
> I thought WW warehouse was out of business...
> http://www.woodworkerswarehouse.com
They are.
I meant Woodworkers Club, affiliated with Woodcraft