Hi all, I'm new to the forum. Very nice, so little spam and flaming.
I have a question about finishing outdoor furniture. I'm planning to build a
sofa, chair and coffee table out of either teak or Honduran mahogany (if
someone has another good suggestion, I'm open.) I don't want the wood to
weather to grey but rather maintain the natural color of the wood. I realize
yearly maintenance will be required. I was thinking exterior grade
polyurethane. Can anyone give me some suggestions as to how to proceed?
Thanks,
San Diego Joe
"mp" wrote:
>> I have a question about finishing outdoor furniture. I'm planning to build
>> a
>> sofa, chair and coffee table out of either teak or Honduran mahogany (if
>> someone has another good suggestion, I'm open.) I don't want the wood to
>> weather to grey but rather maintain the natural color of the wood. I
>> realize
>> yearly maintenance will be required. I was thinking exterior grade
>> polyurethane. Can anyone give me some suggestions as to how to proceed?
>
> Try Sikkens Cetol. It's the best product that I've come across. The finish
> will last a few years, and when it's time to re-apply it can go over top of
> the old finish - no stripping required.
>
>
Hi mp,
I notice at their web site that they recommend 3 coats of stain only (Cetol
1), but no coat of anything over that. Is that right?
Thanks,
San Diego Joe
"Edwin Pawlowski" wrote:
>
> "San Diego Joe" <[email protected]> wrote in message
> news:1109786848.3d94906a73ac01ca9675a373317fdb6e@teranews...
>> Hi all, I'm new to the forum. Very nice, so little spam and flaming.
>>
>> I have a question about finishing outdoor furniture. I'm planning to build
>> a
>> sofa, chair and coffee table out of either teak or Honduran mahogany (if
>> someone has another good suggestion, I'm open.) I don't want the wood to
>> weather to grey but rather maintain the natural color of the wood. I
>> realize
>> yearly maintenance will be required. I was thinking exterior grade
>> polyurethane. Can anyone give me some suggestions as to how to proceed?
> .
>
> I made two pieces of furniture last year. One is coated with Sikkins Cetol
> and the other with Peonofin. Both have UV inhibitors. While they seem to
> be OK, I'll have to get back to you in five years. I also have a bench
> coated with Minwax Helmsman that is doing well after about 4 years.
>
>
Okay, thanks Edwin. I'll check with you in 2010!
San Diego Joe
"Lew Hodgett" wrote:
> San Diego Joe wrote:
>> Hi all, I'm new to the forum. Very nice, so little spam and flaming.
>>
>> I have a question about finishing outdoor furniture. I'm planning to build a
>> sofa, chair and coffee table out of either teak or Honduran mahogany (if
>> someone has another good suggestion, I'm open.) I don't want the wood to
>> weather to grey but rather maintain the natural color of the wood. I realize
>> yearly maintenance will be required. I was thinking exterior grade
>> polyurethane. Can anyone give me some suggestions as to how to proceed?
>
> You can't win this one, especially living in S/D.
>
> If you don't want to believe me, take a walk down on Shelter Island and
> look at some of the boats.
I don't want to believe you ;) I want a mahogany sofa. I'd have to say
though, that I've seen many boats where the decks still look pretty good.
>
> If you don't want to let it gray natural, might consider redwood. It
> will still require maintenance, but at least you can stay with it.
Yeah, redwood is on my list too and maybe I'll just have to use it.
Thanks,
San Diego Joe
"Mike Marlow" wrote:
>
> "Lew Hodgett" <[email protected]> wrote in message
> news:[email protected]...
>> San Diego Joe wrote:
>>> Hi all, I'm new to the forum. Very nice, so little spam and flaming.
>>>
>>> I have a question about finishing outdoor furniture. I'm planning to
> build a
>>> sofa, chair and coffee table out of either teak or Honduran mahogany (if
>>> someone has another good suggestion, I'm open.) I don't want the wood to
>>> weather to grey but rather maintain the natural color of the wood. I
> realize
>>> yearly maintenance will be required. I was thinking exterior grade
>>> polyurethane. Can anyone give me some suggestions as to how to proceed?
>>
>> You can't win this one, especially living in S/D.
>>
>> If you don't want to believe me, take a walk down on Shelter Island and
>> look at some of the boats.
>>
>> If you don't want to let it gray natural, might consider redwood. It
>> will still require maintenance, but at least you can stay with it.
>>
>
> I hear this said often, but I look at boats on the St. Lawrence Seaway - a
> lot of 80 year old Lymans and the likes that are Mahogany, and they look
> like the day they were built. I don't know what the varnish is that they
> use on these things, but it works, and they don't refinish them every year.
> I'd suggest checking with a newsgroup for boats.
That's a good idea. Off I go.
--
San Diego Joe
Dave,
I was considering Ipe, but am a little worried about (from what I hear) how
hard it is to work with. Do you have some experience?
Joe
"Teamcasa" wrote:
> Use Ipe'
>
> Dave
>
> "San Diego Joe" <[email protected]> wrote in message
> news:1109786848.3d94906a73ac01ca9675a373317fdb6e@teranews...
>> Hi all, I'm new to the forum. Very nice, so little spam and flaming.
>>
>> I have a question about finishing outdoor furniture. I'm planning to build
>> a
>> sofa, chair and coffee table out of either teak or Honduran mahogany (if
>> someone has another good suggestion, I'm open.) I don't want the wood to
>> weather to grey but rather maintain the natural color of the wood. I
>> realize
>> yearly maintenance will be required. I was thinking exterior grade
>> polyurethane. Can anyone give me some suggestions as to how to proceed?
>>
>>
>> Thanks,
>> San Diego Joe
>>
"[email protected]" wrote:
> On Wed, 02 Mar 2005 10:07:25 -0800, San Diego Joe <[email protected]>
> wrote:
>
>> Hi all, I'm new to the forum. Very nice, so little spam and flaming.
>>
>> I have a question about finishing outdoor furniture. I'm planning to build a
>> sofa, chair and coffee table out of either teak or Honduran mahogany (if
>> someone has another good suggestion, I'm open.) I don't want the wood to
>> weather to grey but rather maintain the natural color of the wood. I realize
>> yearly maintenance will be required. I was thinking exterior grade
>> polyurethane. Can anyone give me some suggestions as to how to proceed?
>>
>>
>> Thanks,
>> San Diego Joe
>
>
> ultimately you're wasting your time. wood left outdoors turns grey,
> weathers, splits and eventually decomposes. you can slow it down a
> little, mebbe a few seasons, but if you want to keep the original
> color keep it indoors.
But I already have furniture in my living room. I need something for my
deck.
San Diego Joe
4,000 - 5,000 Gallons.
Goldfish, a RES named Colombo and an Oscar.
> I have a question about finishing outdoor furniture. I'm planning to build
> a
> sofa, chair and coffee table out of either teak or Honduran mahogany (if
> someone has another good suggestion, I'm open.) I don't want the wood to
> weather to grey but rather maintain the natural color of the wood. I
> realize
> yearly maintenance will be required. I was thinking exterior grade
> polyurethane. Can anyone give me some suggestions as to how to proceed?
Try Sikkens Cetol. It's the best product that I've come across. The finish
will last a few years, and when it's time to re-apply it can go over top of
the old finish - no stripping required.
In article <1109803113.e4b776bba25f106595b685698066f84c@teranews>,
San Diego Joe <[email protected]> wrote:
>"Lew Hodgett" wrote:
>
>> San Diego Joe wrote:
>>> Hi all, I'm new to the forum. Very nice, so little spam and flaming.
>>>
>>> I have a question about finishing outdoor furniture. I'm planning to build a
>>> sofa, chair and coffee table out of either teak or Honduran mahogany (if
>>> someone has another good suggestion, I'm open.) I don't want the wood to
>>> weather to grey but rather maintain the natural color of the wood. I realize
>>> yearly maintenance will be required. I was thinking exterior grade
>>> polyurethane. Can anyone give me some suggestions as to how to proceed?
>>
>> You can't win this one, especially living in S/D.
>>
>> If you don't want to believe me, take a walk down on Shelter Island and
>> look at some of the boats.
>I don't want to believe you ;) I want a mahogany sofa. I'd have to say
>though, that I've seen many boats where the decks still look pretty good.
>>
>> If you don't want to let it gray natural, might consider redwood. It
>> will still require maintenance, but at least you can stay with it.
>
>Yeah, redwood is on my list too and maybe I'll just have to use it.
In your clime, Mahogany _will_ be maintenance intensive. Marine 'spar'
varnish with UV inhibitors -- with full strip/refinish required every
couple of years, and _probably_ more often. (Depends how much of the
time the furniture is in the shade, and how close to the water you are.
I had family in Mission Beach, on the strip between the Ocean and the Bay.
Stuff at that house *really* took a beating!) Teak, only a little less so.
Redwood will also require maintenance, but considerably less. A good
redwood/cedar oil stain will hold for several years, and re-treatment
is just wash the dirt off, and re-apply. "Rez" brand cedar stain is
*good* stuff on redwood.
Redwood, teak, and cypress, are about indestructible, but all turn 'grey'
if left to weather naturally. They _will_ retain the 'original' color,
if you keep up the oils in the wood.
"Lew Hodgett" <[email protected]> wrote in message
news:[email protected]...
> San Diego Joe wrote:
> > Hi all, I'm new to the forum. Very nice, so little spam and flaming.
> >
> > I have a question about finishing outdoor furniture. I'm planning to
build a
> > sofa, chair and coffee table out of either teak or Honduran mahogany (if
> > someone has another good suggestion, I'm open.) I don't want the wood to
> > weather to grey but rather maintain the natural color of the wood. I
realize
> > yearly maintenance will be required. I was thinking exterior grade
> > polyurethane. Can anyone give me some suggestions as to how to proceed?
>
> You can't win this one, especially living in S/D.
>
> If you don't want to believe me, take a walk down on Shelter Island and
> look at some of the boats.
>
> If you don't want to let it gray natural, might consider redwood. It
> will still require maintenance, but at least you can stay with it.
>
I hear this said often, but I look at boats on the St. Lawrence Seaway - a
lot of 80 year old Lymans and the likes that are Mahogany, and they look
like the day they were built. I don't know what the varnish is that they
use on these things, but it works, and they don't refinish them every year.
I'd suggest checking with a newsgroup for boats.
--
-Mike-
[email protected]
San Diego Joe wrote:
> Hi all, I'm new to the forum. Very nice, so little spam and flaming.
>
> I have a question about finishing outdoor furniture. I'm planning to build a
> sofa, chair and coffee table out of either teak or Honduran mahogany (if
> someone has another good suggestion, I'm open.) I don't want the wood to
> weather to grey but rather maintain the natural color of the wood. I realize
> yearly maintenance will be required. I was thinking exterior grade
> polyurethane. Can anyone give me some suggestions as to how to proceed?
You can't win this one, especially living in S/D.
If you don't want to believe me, take a walk down on Shelter Island and
look at some of the boats.
If you don't want to let it gray natural, might consider redwood. It
will still require maintenance, but at least you can stay with it.
HTH
Lew
Use Ipe'
Dave
"San Diego Joe" <[email protected]> wrote in message
news:1109786848.3d94906a73ac01ca9675a373317fdb6e@teranews...
> Hi all, I'm new to the forum. Very nice, so little spam and flaming.
>
> I have a question about finishing outdoor furniture. I'm planning to build
> a
> sofa, chair and coffee table out of either teak or Honduran mahogany (if
> someone has another good suggestion, I'm open.) I don't want the wood to
> weather to grey but rather maintain the natural color of the wood. I
> realize
> yearly maintenance will be required. I was thinking exterior grade
> polyurethane. Can anyone give me some suggestions as to how to proceed?
>
>
> Thanks,
> San Diego Joe
>
Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **
----------------------------------------------------------
http://www.usenet.com
>
> I was considering Ipe, but am a little worried about (from what I hear)
> how
> hard it is to work with. Do you have some experience?
>
> Joe
Ipe will dull cheap tools. It does machine well and needs no finish for
typical outdoor use. It does sand or scrap smooth (think hammer handles).
I made an garden bench for an old neighbor, she left it in the garden for
over 10 years. Never touched it other than sitting.
A google search on its properties will give you more info.
Dave
Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **
----------------------------------------------------------
http://www.usenet.com
San Diego Joe wrote:
> I don't want to believe you ;) I want a mahogany sofa. I'd have to say
> though, that I've seen many boats where the decks still look pretty good.
Totally different ball game.
IMHO, you would rather wear a hair shirt than try to maintain teak
bright work.
OTOH, Honduras mahogany can be maintained since you can get a good bond
between the wood and your favorite flavor of sheep dip you call varnish.
BTW, latest price for a case of 6, 1,000 ML cans of Epifanes Gloss
Varnish is $132.54 + shipping.
A favorite for boats.
If you check it out, will probably find a major difference in price
between Redwood & Honduras Mahogany.
Also, if you can live with that stuff they bring in from Africa I call
"mahogany of the week", you will save a few $.
HTH
Lew
Mike Marlow wrote:
> I hear this said often, but I look at boats on the St. Lawrence Seaway - a
> lot of 80 year old Lymans and the likes that are Mahogany, and they look
> like the day they were built.
Totally different world.
1) You are in a fresh, not a salt water area.
(There is a reason they refer to fresh water as "sweet water")
2) Since you are at a higher latitude, you have a much shorter season,
say 4 months, maybe 4-1/2, thus much less UV to content with than in the
San Diego area with year around UV damage.
As an example, given the same amount of time on the water, if you get 10
years out of a set of sails on the Great Lakes, but you might only get
2-3 in San Diego.
Same applies to coatings.
HTH
Lew
"San Diego Joe" <[email protected]> wrote in message
news:1109786848.3d94906a73ac01ca9675a373317fdb6e@teranews...
> Hi all, I'm new to the forum. Very nice, so little spam and flaming.
>
> I have a question about finishing outdoor furniture. I'm planning to build
> a
> sofa, chair and coffee table out of either teak or Honduran mahogany (if
> someone has another good suggestion, I'm open.) I don't want the wood to
> weather to grey but rather maintain the natural color of the wood. I
> realize
> yearly maintenance will be required. I was thinking exterior grade
> polyurethane. Can anyone give me some suggestions as to how to proceed?
.
I made two pieces of furniture last year. One is coated with Sikkins Cetol
and the other with Peonofin. Both have UV inhibitors. While they seem to
be OK, I'll have to get back to you in five years. I also have a bench
coated with Minwax Helmsman that is doing well after about 4 years.
On Thu, 03 Mar 2005 13:37:06 -0800, San Diego Joe <[email protected]>
wrote:
>"[email protected]" wrote:
>
>> On Wed, 02 Mar 2005 10:07:25 -0800, San Diego Joe <[email protected]>
>> wrote:
>>
>>> Hi all, I'm new to the forum. Very nice, so little spam and flaming.
>>>
>>> I have a question about finishing outdoor furniture. I'm planning to build a
>>> sofa, chair and coffee table out of either teak or Honduran mahogany (if
>>> someone has another good suggestion, I'm open.) I don't want the wood to
>>> weather to grey but rather maintain the natural color of the wood. I realize
>>> yearly maintenance will be required. I was thinking exterior grade
>>> polyurethane. Can anyone give me some suggestions as to how to proceed?
>>>
>>>
>>> Thanks,
>>> San Diego Joe
>>
>>
>> ultimately you're wasting your time. wood left outdoors turns grey,
>> weathers, splits and eventually decomposes. you can slow it down a
>> little, mebbe a few seasons, but if you want to keep the original
>> color keep it indoors.
>
>But I already have furniture in my living room. I need something for my
>deck.
then choose a wood that looks good as it ages (and doesn't tend to
make splinters) or figure on a schedule of sanding and refinishing.
On Thu, 03 Mar 2005 17:57:23 -0700, [email protected] wrote:
>On Thu, 03 Mar 2005 13:37:06 -0800, San Diego Joe <[email protected]>
>wrote:
>
>>"[email protected]" wrote:
>>
>>> On Wed, 02 Mar 2005 10:07:25 -0800, San Diego Joe <[email protected]>
>>> wrote:
>>>
>>>> Hi all, I'm new to the forum. Very nice, so little spam and flaming.
>>>>
>>>> I have a question about finishing outdoor furniture. I'm planning to build a
>>>> sofa, chair and coffee table out of either teak or Honduran mahogany (if
>>>> someone has another good suggestion, I'm open.) I don't want the wood to
>>>> weather to grey but rather maintain the natural color of the wood. I realize
>>>> yearly maintenance will be required. I was thinking exterior grade
>>>> polyurethane. Can anyone give me some suggestions as to how to proceed?
>>>>
>>>>
>>>> Thanks,
>>>> San Diego Joe
>>>
>>>
>>> ultimately you're wasting your time. wood left outdoors turns grey,
>>> weathers, splits and eventually decomposes. you can slow it down a
>>> little, mebbe a few seasons, but if you want to keep the original
>>> color keep it indoors.
>>
>>But I already have furniture in my living room. I need something for my
>>deck.
>
>then choose a wood that looks good as it ages (and doesn't tend to
>make splinters) or figure on a schedule of sanding and refinishing.
Boy do I agree here! Have two patio mahogony tables that SWMBO wanted to stay
brown. Tried exterior poly and spar poly with added UV block. Nothing worked
for much more than two years. Finally found that a thin wb poly will last that
long, and doesn't crack, so every 2 years I run a belt sander over the top and
recoat. I figure it's last for several decades before it gets too thin to hold
a coffee cup:-)
GerryG
On Wed, 02 Mar 2005 14:28:10 -0800, San Diego Joe wrote:
> I notice at their web site that they recommend 3 coats of stain only
> (Cetol 1), but no coat of anything over that. Is that right?
I've used it on windows. Cetol 1 is not a stain but a tinted varnish. It
actually produces a film. Good stuff (so far).
Luigi
Replace "nonet" with "yukonomics" for real email
www.yukonomics.ca/wooddorking/humour.html
www.yukonomics.ca/wooddorking/antifaq.html
On Wed, 02 Mar 2005 10:07:25 -0800, San Diego Joe <[email protected]>
wrote:
>Hi all, I'm new to the forum. Very nice, so little spam and flaming.
>
>I have a question about finishing outdoor furniture. I'm planning to build a
>sofa, chair and coffee table out of either teak or Honduran mahogany (if
>someone has another good suggestion, I'm open.) I don't want the wood to
>weather to grey but rather maintain the natural color of the wood. I realize
>yearly maintenance will be required. I was thinking exterior grade
>polyurethane. Can anyone give me some suggestions as to how to proceed?
>
>
>Thanks,
>San Diego Joe
ultimately you're wasting your time. wood left outdoors turns grey,
weathers, splits and eventually decomposes. you can slow it down a
little, mebbe a few seasons, but if you want to keep the original
color keep it indoors.