CADstd is easy to learn and they have a freeware version. It is missing
a few features, but they can be worked around.
Need assistance, e-mail me
[email protected]
Last time I looked, Rhino Academic version including Flamingo was about
$199.00.
If you sign up for local community college woodworking classes, you may
be able to get a student ID and qualify for the academic price.
An example of what you can do with Rhino and Flamingo can be found at
http://www.renderosity.com/viewed.ez?galleryid=846381&Start=1&Sectionid=12&filter_genre_id=0&WhatsNew=Yes
That took me about an hour to do. It's not hard and the Rhino news
groups provide LOTS of help for the beginners.
Nudity = 'N' means no nudity. :D
I'm going to try that filter, by bubbling the DC output air up through
water with various bubble breaking screens in the tank. I'm not really
sure how to test it's effectiveness, except by how dirty the water gets
and by putting an additional 0.5 micron filter on the tank exhaust and
see how fast it gets dirty.
I you can wait to find someone with a copy to sell (try ebay), I would
give a recommendation to an early version of a product from Autodesk
called AutoSketch.
I have used version 2.1 for over 8 years and love it. I have purchased
a later version (6.0??) but it was too powerful and difficult to learn
so I only use it to save one of my drawing in a .dxf format to email
to someone. I bougth my copy used for about $20.00
Version 2.1 of Autosketch has everything a basic woodworker needs. (if
2D is OK.)
It has a couple of basic templates for starting drawings (one is for a
shop project)
It has very basic tool bars for drawing, editing, measuring, viewing,
etc.
The basic drawings can easily be set up to draw in inches, feet and
inches, metric, etc.
I has most of the "special" tools that a beginning CAD user can
comprehend and use without a learning curve that takes more time than
it saves (snap, trim, extend, curves/radius's, layers, group, break,
etc).
I even used it at an engineering company I used to work for because I
could train the office assistants/typists to make site drawings of
properties the engineers were evaluating (it only took an hour or two
to get them up to speed).
http://tinyurl.com/3peee
[email protected] (Chris) wrote in message news:<[email protected]>...
> I am looking for 2D or 3D, freeware or low cost woodworking cad
> software so I can design my own wooden toys, clocks, cabinet,
> furniture, kichen tables and more at a beginner level?
>
> Thanks,
Oops, sorry. Try this. It was supposed to be a link to an Ebay search
for DeltaCad. It's the older 3.1 version but its adequate for
beginners and you can't beat the price. No affiliation...
http://search.ebay.com/deltacad_W0QQsojsZ1QQfromZR40
[email protected] (skimhoff) wrote in message news:<[email protected]>...
> http://tinyurl.com/3peee
>
>
> [email protected] (Chris) wrote in message news:<[email protected]>...
> > I am looking for 2D or 3D, freeware or low cost woodworking cad
> > software so I can design my own wooden toys, clocks, cabinet,
> > furniture, kichen tables and more at a beginner level?
> >
> > Thanks,
You can pickup an older version of turbocad cheap. I started with their
learning edition which was 2d and free. Got pretty proficient with it,
just bought version 8 which is also 3d for $20 off the web. The current
version is 10.
Phil.
Chris wrote:
> I am looking for 2D or 3D, freeware or low cost woodworking cad
> software so I can design my own wooden toys, clocks, cabinet,
> furniture, kichen tables and more at a beginner level?
>
> Thanks,
"Chris" <[email protected]> wrote in message
news:[email protected]...
> I am looking for 2D or 3D, freeware or low cost woodworking cad
> software so I can design my own wooden toys, clocks, cabinet,
> furniture, kichen tables and more at a beginner level?
>
> Thanks,
Look into QuickCAD. I paid maybe $80 for this a few years ago...don't know
what it goes for now. It can do a lot of stuff but there is some learning
curve. You can do basic stuff pretty easily though.
dwhite
Version 10.5 actually. Yes, the .5 edition did add features.
"Phil" <[email protected]> wrote in message
news:[email protected]...
> You can pickup an older version of turbocad cheap. I started with their
> learning edition which was 2d and free. Got pretty proficient with it,
> just bought version 8 which is also 3d for $20 off the web. The current
> version is 10.
"Sam the Cat" <[email protected]> wrote in message
news:[email protected]...
> designcad http://www.imsisoft.com/faminfo.asp?fam=2
Very good value for money and like all CAD packages - DIFFICULT TO LEARN. I
went through two 15 day trial periods with it and threw in the towel and I
consider myself exceptionally strong in computer applications.
Bob
designcad http://www.imsisoft.com/faminfo.asp?fam=2
"Chris" <[email protected]> wrote in message
news:[email protected]...
> I am looking for 2D or 3D, freeware or low cost woodworking cad
> software so I can design my own wooden toys, clocks, cabinet,
> furniture, kichen tables and more at a beginner level?
>
> Thanks,
"Dan White" <[email protected]> wrote:
>"Chris" <[email protected]> wrote in message
>> I am looking for 2D or 3D, freeware or low cost woodworking cad
>> software so I can design my own wooden toys, clocks, cabinet,
>> furniture, kichen tables and more at a beginner level?
>Look into QuickCAD. I paid maybe $80 for this a few years
>ago...don't know what it goes for now. It can do a lot of stuff
>but there is some learning curve. You can do basic stuff pretty
>easily though.
Can your QuickCAD dimension an arc? I don't mean degrees, I mean
distance along a curved line. Thanks in advance.
"tillius" <[email protected]> wrote in message
news:[email protected]...
> Nudity = 'N' means no nudity. :D
>
> I'm going to try that filter, by bubbling the DC output air up through
> water with various bubble breaking screens in the tank. I'm not really
> sure how to test it's effectiveness, except by how dirty the water gets
> and by putting an additional 0.5 micron filter on the tank exhaust and
> see how fast it gets dirty.
>
Some canister vacuum systems for home use water as you may .know. I'm not
sure, but you may need to add a surfactant and anti-foaming agent to the
reservoir. I can just imagine the mess out the top if all that wood dust
accumulates on the water surface and the system starts up.
Larry
On 30 Dec 2004 08:06:49 -0800, "tillius" <[email protected]> wrote:
>Nudity = 'N' means no nudity. :D
>
>I'm going to try that filter, by bubbling the DC output air up through
>water with various bubble breaking screens in the tank. I'm not really
>sure how to test it's effectiveness, except by how dirty the water gets
>and by putting an additional 0.5 micron filter on the tank exhaust and
>see how fast it gets dirty.
You may also want to check what that's going to do for your system
pressure. Seems that having to force the air through the water might put
quite a load on the system resulting in a serious drop in both static
pressure and air velocity. But then again, I'm only an EE sizing up a
hydraulic engineering problem.
+--------------------------------------------------------------------------------+
Now we'll just use some glue to hold things in place until the brads dry
+--------------------------------------------------------------------------------+
"Chris" <[email protected]> wrote in message
news:[email protected]...
>I am looking for 2D or 3D, freeware or low cost woodworking cad
> software
I found this list somewhere. Maybe it will help.
Drafting Software:
http://www.dcad.com (Free Demo - Pay) - DeltaCAD
http://www.engsw.com (Free Demo - Pay) - PowerCADD
http://www.cadstd.com (Free Demo - Pay) - CADstd
http://www.ilexsoft.com (Free Demo - Pay) - HighDesign
http://www.microspot.com/products/macdraft.htm (Free Demo - Pay) - MacDraft
http://www.adx-online.com/realcadd/realcadd.htm (Free Demo - Pay) - RealCADD
http://guide.apple.com/uscategories/3d.lasso (Click on the CAD radio button)
http://www.imsisoft.com (Several to choose from)
http://www.idecad.com (Free Demo - Pay) - ideCAD
http://www.emachineshop.com (Free) - emachineshop
http://www.ransen.com/Dexterpen/Default.htm (Free Demo - Pay) - Dexterpen
http://www.corusconstruction.com/page_8974.htm (Free) - Corus Construction
Centre
http://www.ashlar.com (Pay) - Ashlar-Vellum
http://www.ptc.com/appserver/it/icm/cda/template_lib/product/icm01_product_v.jsp?&im_dbkey=2295&im_language=en&tab=try
(Pay) ProDesktop 3D
http://ppo.intergraph.com/SmartSketch (Free) SmartSketch
http://justcad.com/ (Free) - JustCAD
http://www.cadstd.com/ (Free and Pay) CADSTD
http://www.freecad.com/ (Free) - FreeCAD
"tillius" <[email protected]> wrote in message
news:[email protected]...
> Actually, the URL for the picture is:
>
> http://www.renderosity.com/viewed.ez?galleryid=846381&Start=1&Artist=tillius&ByArtist=Yes
> Sorry about that.
>
Went there and the filter looks interesting. An error message appeared
above the rendering(see below) but I couldn't find the nudity in your
picture :
Query was: SELECT galleryid FROM gallery LEFT JOIN gallerysection ON
gallery.sectionid = gallerysection.sectionid WHERE author = 'tillius' AND
nudity='N' ORDER BY uploadedon DESC LIMIT 0, ???
On 18 Nov 2004 21:36:55 -0800, [email protected] (Chris) wrote:
>I am looking for 2D or 3D, freeware or low cost woodworking cad
>software so I can design my own wooden toys, clocks, cabinet,
>furniture, kichen tables and more at a beginner level?
>
>Thanks,
The only free CAD I know about is bCAD by ProPro Group.
It is DOS based. An internet search should find it.
I'd suggest Woodworking Project For Everyone as a low
cost CAD that is by DesignCAD.
Thunder