I have cut 15 cedar poles for use as hiking staffs for the guys in my
Cub Scout den. I want to let them dry for the next year or so and
then strip the bark, smooth them down and apply spar varnish. I also
plan to apply a brass name plate, stainless tip and a leather strap.
I will present the staffs during their crossover ceremony into the Boy
Scouts when they complete the second year Webelos program.
Any thoughts or suggestions on how to completely strip the bark down
to the bare wood?
On Apr 2, 6:51 pm, "Neil Larson" <[email protected]> wrote:
> > Better yet, have the kids strip the bark, sand and varnish. Your way,
> > the first thing you'll have after the presentation is a bunch of little
> > Darth Mauls whacking away at each other. Make 'em work for the staffs,
> > and they'll treasure them.
>
> > I still have mine (saguaro rib).
>
> > --
> > "Keep your ass behind you."
>
> I completly agree, let them work for it, that is what I did with my scouts,
> tho we used persimmon. A drw Knife works great but i would leave off the
> sanding and let a little bark remaine, Looks much better.
Hey now, I don't think it is safe to turn Cub Scouts loose with sharp
tools simultaneously. Surely somone will agree? Not even a
pocketknife let alone a draw knive, c'mon.
Thanks for the suggestions.
I will make the hiking staffs a project for their "Craftsman" activity
pin.
My guys have all earned their "Whittlin Chip" and they are careful
with their sharp objects.
I require parental involvement and when we are whittlin they pair off
and keep sufficient distance from the next pair.
thanks again.
t;c,,,
"lwhaley" <[email protected]> wrote in message
news:[email protected]...
> Hey now, I don't think it is safe to turn Cub Scouts loose with sharp
> tools simultaneously. Surely somone will agree? Not even a
> pocketknife let alone a draw knive, c'mon.
>
They have to learn sometime.
--
Roger Shoaf
If you are not part of the solution, you are not dissolved in the solvent.
Ah, brings back memories! As an 8 YO playing sandlot football with
some 'older guys' the quarterback asked me to run out four steps and
turn right for a pass. "I've never done that before" was my response
to which he said without hesitation "Then you can't learn any
younger!"!
On Sat, 7 Apr 2007 17:51:37 -0700, "Roger Shoaf"
<[email protected]> wrote:
>
>"lwhaley" <[email protected]> wrote in message
>news:[email protected]...
>> Hey now, I don't think it is safe to turn Cub Scouts loose with sharp
>> tools simultaneously. Surely somone will agree? Not even a
>> pocketknife let alone a draw knive, c'mon.
>>
>
>They have to learn sometime.
> Better yet, have the kids strip the bark, sand and varnish. Your way,
> the first thing you'll have after the presentation is a bunch of little
> Darth Mauls whacking away at each other. Make 'em work for the staffs,
> and they'll treasure them.
>
> I still have mine (saguaro rib).
>
> --
> "Keep your ass behind you."
I completly agree, let them work for it, that is what I did with my scouts,
tho we used persimmon. A drw Knife works great but i would leave off the
sanding and let a little bark remaine, Looks much better.
In article <rcQPh.741$IY4.552@trndny03>, Nova <[email protected]>
wrote:
> tlc... wrote:
> > I have cut 15 cedar poles for use as hiking staffs for the guys in my
> > Cub Scout den. I want to let them dry for the next year or so and
> > then strip the bark, smooth them down and apply spar varnish. I also
> > plan to apply a brass name plate, stainless tip and a leather strap.
> >
> > I will present the staffs during their crossover ceremony into the Boy
> > Scouts when they complete the second year Webelos program.
> >
> > Any thoughts or suggestions on how to completely strip the bark down
> > to the bare wood?
> >
>
> I'd use a draw or push knife:
>
> http://www.leevalley.com/wood/page.aspx?c=2&p=31070&cat=1,130,43332
Better yet, have the kids strip the bark, sand and varnish. Your way,
the first thing you'll have after the presentation is a bunch of little
Darth Mauls whacking away at each other. Make 'em work for the staffs,
and they'll treasure them.
I still have mine (saguaro rib).
--
"Keep your ass behind you."
tlc... wrote:
> I have cut 15 cedar poles for use as hiking staffs for the guys in my
> Cub Scout den. I want to let them dry for the next year or so and
> then strip the bark, smooth them down and apply spar varnish. I also
> plan to apply a brass name plate, stainless tip and a leather strap.
>
> I will present the staffs during their crossover ceremony into the Boy
> Scouts when they complete the second year Webelos program.
>
> Any thoughts or suggestions on how to completely strip the bark down
> to the bare wood?
>
I'd use a draw or push knife:
http://www.leevalley.com/wood/page.aspx?c=2&p=31070&cat=1,130,43332
--
Jack Novak
Buffalo, NY - USA
[email protected]