A friend of mine and I own the same Makita router. A couple of days ago he
called for me to go to his place to look at something he bought. It was a
KING variable speed 3 1/4 hp router in a nice case that came with 3
collets, spare brushes, a 1/2" straight bit, guide fence, edge guide, and
adjust chute.
We put the Makita next to it and whoever reverse engineered the KING was
GOOD, because they were identical. We plugged them in - started them up one
by one and the only difference in start and stop was the Makita had an
electric brake and jerked on stopping, whereas the KING slowed normally.
The real plus was that the clone had the VS feature. Also, you can
interchange the plates/guides between the two.
Then, the super-plus came when he told me he paid just $119.00 CAN for
it!!!! In fact, the dealer gave him another 10 bucks off. It has a two year
warranty to boot, so even if it gives out within that time it's replaced or
fixed. This is too good a spare to pass up. I went to the dealer next
morning and picked one up, I've tried it and it works fine.....As a spare or
standby how can anyone go wrong at that price and with those features!
Keith
"Salmo" <[email protected]> wrote in message
news:[email protected]...
>A friend of mine and I own the same Makita router. A couple of days ago he
>called for me to go to his place to look at something he bought. It was a
>KING variable speed 3 1/4 hp router in a nice case that came with 3
>collets, spare brushes, a 1/2" straight bit, guide fence, edge guide, and
>adjust chute.
>
> We put the Makita next to it and whoever reverse engineered the KING was
> GOOD, because they were identical. We plugged them in - started them up
> one by one and the only difference in start and stop was the Makita had an
> electric brake and jerked on stopping, whereas the KING slowed normally.
> The real plus was that the clone had the VS feature. Also, you can
> interchange the plates/guides between the two.
I think if you took the 2 units apart you would see differences that would
probably indicate a longer life expectancy for the Makita.
In article <[email protected]>,
"Salmo" <[email protected]> wrote:
> A friend of mine and I own the same Makita router. A couple of days ago he
> called for me to go to his place to look at something he bought. It was a
> KING variable speed 3 1/4 hp router in a nice case that came with 3
> collets, spare brushes, a 1/2" straight bit, guide fence, edge guide, and
> adjust chute.
>
> We put the Makita next to it and whoever reverse engineered the KING was
> GOOD, because they were identical. We plugged them in - started them up one
> by one and the only difference in start and stop was the Makita had an
> electric brake and jerked on stopping, whereas the KING slowed normally.
> The real plus was that the clone had the VS feature. Also, you can
> interchange the plates/guides between the two.
>
> Then, the super-plus came when he told me he paid just $119.00 CAN for
> it!!!! In fact, the dealer gave him another 10 bucks off. It has a two year
> warranty to boot, so even if it gives out within that time it's replaced or
> fixed. This is too good a spare to pass up. I went to the dealer next
> morning and picked one up, I've tried it and it works fine.....As a spare or
> standby how can anyone go wrong at that price and with those features!
>
> Keith
'cept the King wobbles on the posts as it is plunged into the work. It
is impossible to plunge a 1/2" bit straight down without it becoming a
9/16 x 5/8 oval. Tried it, didn't work, exchanged it, same story, money
back. I'd pay 50 bucks more if the same router was a fixed base because
the motor runs very smooth and seems plenty powerful.
Too bad, really.
Robatoy wrote:
> In article <[email protected]>,
> "Salmo" <[email protected]> wrote:
>
>
>>A friend of mine and I own the same Makita router. A couple of days ago he
>>called for me to go to his place to look at something he bought. It was a
>>KING variable speed 3 1/4 hp router in a nice case that came with 3
>>collets, spare brushes, a 1/2" straight bit, guide fence, edge guide, and
>>adjust chute.
>>
>>We put the Makita next to it and whoever reverse engineered the KING was
>>GOOD, because they were identical. We plugged them in - started them up one
>>by one and the only difference in start and stop was the Makita had an
>>electric brake and jerked on stopping, whereas the KING slowed normally.
>>The real plus was that the clone had the VS feature. Also, you can
>>interchange the plates/guides between the two.
>>
>>Then, the super-plus came when he told me he paid just $119.00 CAN for
>>it!!!! In fact, the dealer gave him another 10 bucks off. It has a two year
>>warranty to boot, so even if it gives out within that time it's replaced or
>>fixed. This is too good a spare to pass up. I went to the dealer next
>>morning and picked one up, I've tried it and it works fine.....As a spare or
>>standby how can anyone go wrong at that price and with those features!
>>
>>Keith
>
>
> 'cept the King wobbles on the posts as it is plunged into the work. It
> is impossible to plunge a 1/2" bit straight down without it becoming a
> 9/16 x 5/8 oval. Tried it, didn't work, exchanged it, same story, money
> back. I'd pay 50 bucks more if the same router was a fixed base because
> the motor runs very smooth and seems plenty powerful.
> Too bad, really.
I am using it as a fixed base router -- in a table. Seems to be fine. I
noticed that the plunge action was a little iffy -- and catchy as well.
--
Will
Occasional Techno-geek