I am interested in building the taper jig shown on the
http://www.e-woodshop.net/Jigs.htm page.
The text says that the idea came from FWW 2005 "Power Tools" issue. I am a
subscriber to FWW and I can not find such an issue. There are annual "Tools
and Shops" issues but I can not find the tapering jig in any of them.
I have the feeling that I have seen the original article and I never throw
magazines out, but they do sometimes hide from me. Perhaps I saw it in
magazine which I don't subscribe to.
I would appreciate any help in identifying the magazine issue in which this
article appeared more exactly.
Cheers,
Larry
On May 12, 11:33 pm, Larry Spitz <[email protected]> wrote:
> I am interested in building the taper jig shown on thehttp://www.e-woodshop.net/Jigs.htmpage.
> The text says that the idea came from FWW 2005 "Power Tools" issue. I am a
> subscriber to FWW and I can not find such an issue. There are annual "Tools
> and Shops" issues but I can not find the tapering jig in any of them.
>
> I have the feeling that I have seen the original article and I never throw
> magazines out, but they do sometimes hide from me. Perhaps I saw it in
> magazine which I don't subscribe to.
>
> I would appreciate any help in identifying the magazine issue in which this
> article appeared more exactly.
>
> Cheers,
>
> Larry
Larry ,First time to post here so I think I've sent the Info.as a
direct reply to you. In case anyone else is interested it's Issue No.
178 July/Aug.2005 page 46 FWW Regds. Boysie
[email protected] wrote:
> On May 12, 11:33 pm, Larry Spitz <[email protected]> wrote:
>> I am interested in building the taper jig shown on
>> thehttp://www.e-woodshop.net/Jigs.htmpage. The text says that the idea
>> came from FWW 2005 "Power Tools" issue. I am a subscriber to FWW and I
>> can not find such an issue. There are annual "Tools and Shops" issues but
>> I can not find the tapering jig in any of them.
>>
>> I have the feeling that I have seen the original article and I never
>> throw magazines out, but they do sometimes hide from me. Perhaps I saw it
>> in magazine which I don't subscribe to.
>>
>> I would appreciate any help in identifying the magazine issue in which
>> this article appeared more exactly.
>>
>> Cheers,
>>
>> Larry
>
> Larry ,First time to post here so I think I've sent the Info.as a
> direct reply to you. In case anyone else is interested it's Issue No.
> 178 July/Aug.2005 page 46 FWW Regds. Boysie
Thanks, but that is a different taper jig. I am looking for one with the
eccentric circular disk that gives very precise control of the taper angle
as on the e-woodwork web page.
Still looking.
Larry
Myxylplyk wrote:
> The special publications put out by FWW are just reprinted collections of
> magazine atricles.
>
> Check out: Fine Woodworking Magazine, June 2002 No. 156
> "Adjustable Jig for Cutting Tapers" by David Hastings
>
Thanks for that. Now I have it. I hadn't gone back that far in my
collection.
Also Swingman generously sent me a scanned copy.
I'm happy now. Thanks to all.
Larry
The special publications put out by FWW are just reprinted collections of
magazine atricles.
Check out: Fine Woodworking Magazine, June 2002 No. 156
"Adjustable Jig for Cutting Tapers" by David Hastings
Enjoy,
Myx
"Larry Spitz" <[email protected]> wrote in message
news:[email protected]...
>I am interested in building the taper jig shown on the
> http://www.e-woodshop.net/Jigs.htm page.
> The text says that the idea came from FWW 2005 "Power Tools" issue. I am a
> subscriber to FWW and I can not find such an issue. There are annual
> "Tools
> and Shops" issues but I can not find the tapering jig in any of them.
>
> I have the feeling that I have seen the original article and I never throw
> magazines out, but they do sometimes hide from me. Perhaps I saw it in
> magazine which I don't subscribe to.
>
> I would appreciate any help in identifying the magazine issue in which
> this
> article appeared more exactly.
>
> Cheers,
>
> Larry
>
>
On 5/13/07 3:24 AM, "Swingman" <[email protected]> wrote:
>
> "Swingman" wrote in message
>
>> Found it ... Pg 110, "The Best of Fine Woodworking" - Power Tool
> Techniques
>> 2005.
>>
>> No date, but it says on the cover "display until September 30, 2005.
>
> Here you go:
>
> http://www.taunton.com/finewoodworking/store/pages/017002.asp?
>
Notice that it says "Newsstand-only Publication." In other words, it is not
part of the normal magazine subscription. FWW puts out a number of these
that cover specific topics.
I don't mean to be critical here but what do you need plans for? The two
pictures on the site should be plenty.
"Larry Spitz" <[email protected]> wrote in message
news:[email protected]...
> [email protected] wrote:
>
> Thanks, but that is a different taper jig. I am looking for one with the
> eccentric circular disk that gives very precise control of the taper angle
> as on the e-woodwork web page.
>
> Still looking.
>
> Larry
>
>
"Larry Spitz" wrote in message
> I am interested in building the taper jig shown on the
> http://www.e-woodshop.net/Jigs.htm page.
> The text says that the idea came from FWW 2005 "Power Tools" issue. I am a
> subscriber to FWW and I can not find such an issue. There are annual
"Tools
> and Shops" issues but I can not find the tapering jig in any of them.
>
> I have the feeling that I have seen the original article and I never throw
> magazines out, but they do sometimes hide from me. Perhaps I saw it in
> magazine which I don't subscribe to.
>
> I would appreciate any help in identifying the magazine issue in which
this
> article appeared more exactly.
I'm sure I have the magazine somewhere and will try to dig it out. ITMT, I
will be glad to take some more pictures of it, from different angles, if you
think it would help.
Let me know ... the e-mail below works.
--
www.e-woodshop.net
Last update: 2/20/07
KarlC@ (the obvious)
"Swingman" wrote in message
> Found it ... Pg 110, "The Best of Fine Woodworking" - Power Tool
Techniques
> 2005.
>
> No date, but it says on the cover "display until September 30, 2005.
Here you go:
http://www.taunton.com/finewoodworking/store/pages/017002.asp?
--
www.e-woodshop.net
Last update: 2/20/07
KarlC@ (the obvious)
"Larry Spitz" wrote in message
> I am interested in building the taper jig shown on the
> http://www.e-woodshop.net/Jigs.htm page.
> The text says that the idea came from FWW 2005 "Power Tools" issue. I am a
> subscriber to FWW and I can not find such an issue. There are annual
"Tools
> and Shops" issues but I can not find the tapering jig in any of them.
>
> I have the feeling that I have seen the original article and I never throw
> magazines out, but they do sometimes hide from me. Perhaps I saw it in
> magazine which I don't subscribe to.
>
> I would appreciate any help in identifying the magazine issue in which
this
> article appeared more exactly.
Found it ... Pg 110, "The Best of Fine Woodworking" - Power Tool Techniques
2005.
No date, but it says on the cover "display until September 30, 2005.
--
www.e-woodshop.net
Last update: 2/20/07
KarlC@ (the obvious)