"sam" <[email protected]> wrote in message
news:[email protected]...
> Our space saving furnace is starting to make a whirring,
> tinny noise. Is this going to be as costly as it sounds?
>
> Thanks,
>
More.
--
-Mike-
[email protected]
In article <[email protected]>,
novalidaddress@di\/ersify.com says...
>
> On Sun, 13 Dec 2009 01:13:06 -0600, the infamous sam
> <[email protected]> scrawled the following:
>
> >Our space saving furnace is starting to make a whirring,
> >tinny noise. Is this going to be as costly as it sounds?
>
> If you just recently had a snap freeze (ours was down to 11F), it
> could just be frozen up like mine was. Check your drain pipe for ice.
> Mine had frozen all the way up into the machine so the combustion
> chamber had water in it. Luckily, the drip pan caught most of the
> water when it thawed so my kitchen ceiling didn't collapse from it.
>
> Other problems which can make it sound tinny are:
>
> 1) loose insulation blown into the fan. This can also cause a bad
> vibration during operation. Mice can build nests in systems over the
> summer, when you're not using them much. Be sure to wear a dust mask
> or respirator when cleaning up mouse nests to avoid any Hantavirus.
>
> 2) loose impeller screws. The fan can vibrate if it's loose, or hit
> the sheetmetal cover/guard which causes a tinny noise.
>
> 3) Bad (or just dry) bearings in the fan motor.
>
> Turn the furnace off and unplug it. Pull the inspection covers and
> look for crap in the fan. Spin the fan by hand to listen for that
> tinny noise. See if the motor shaft wobbles. Inspect the covers
> around the fan opening for wear, indicating a loose or bent impeller.
> Look for and lube any zerks on the motor and fan assembly.
>
> How old is your system?
>
> Harbor freight has a nifty English wheel if you have to replace a
> cover due to insignificant scratches. If you wish to fabricate this
> yourself, this could be a nice tool-collecting problem, this whirring
> tinny noise, sam. Don't limit yourself to wooddorking tools, expand
> your metaldorking array, too. Go for it! Enjoy.
Hey Larry!
Much appreciated! I'll get to work. The unit is about
15 years old.
s
On Sun, 13 Dec 2009 01:13:06 -0600, sam <[email protected]> wrote:
>Our space saving furnace is starting to make a whirring,
>tinny noise. Is this going to be as costly as it sounds?
>
>Thanks,
>
>s
On my furnace the fan on the inductor fan came loose on it's hub
(about a year old). I brazed it up several years ago and it's been
fine since. The dealer I bought it from went broke, and I'd have had
to pay a dealer to come in and fix it, and then HOPE to get some of it
back on Warranty - and the local dealers didn't have the part in stock
- so I just fixed it myself.
"sam" <[email protected]> wrote in message
news:[email protected]...
> Our space saving furnace is starting to make a whirring,
> tinny noise. Is this going to be as costly as it sounds?
>
> Thanks,
>
> s
>
I don't know. How costly does it sound now? ;~)
On Sun, 13 Dec 2009 01:13:06 -0600, the infamous sam
<[email protected]> scrawled the following:
>Our space saving furnace is starting to make a whirring,
>tinny noise. Is this going to be as costly as it sounds?
If you just recently had a snap freeze (ours was down to 11F), it
could just be frozen up like mine was. Check your drain pipe for ice.
Mine had frozen all the way up into the machine so the combustion
chamber had water in it. Luckily, the drip pan caught most of the
water when it thawed so my kitchen ceiling didn't collapse from it.
Other problems which can make it sound tinny are:
1) loose insulation blown into the fan. This can also cause a bad
vibration during operation. Mice can build nests in systems over the
summer, when you're not using them much. Be sure to wear a dust mask
or respirator when cleaning up mouse nests to avoid any Hantavirus.
2) loose impeller screws. The fan can vibrate if it's loose, or hit
the sheetmetal cover/guard which causes a tinny noise.
3) Bad (or just dry) bearings in the fan motor.
Turn the furnace off and unplug it. Pull the inspection covers and
look for crap in the fan. Spin the fan by hand to listen for that
tinny noise. See if the motor shaft wobbles. Inspect the covers
around the fan opening for wear, indicating a loose or bent impeller.
Look for and lube any zerks on the motor and fan assembly.
How old is your system?
Harbor freight has a nifty English wheel if you have to replace a
cover due to insignificant scratches. If you wish to fabricate this
yourself, this could be a nice tool-collecting problem, this whirring
tinny noise, sam. Don't limit yourself to wooddorking tools, expand
your metaldorking array, too. Go for it! Enjoy.
--
Don't forget the 7 P's:
Proper Prior Planning Prevents Piss-Poor Performance
"sam" <[email protected]> wrote in message
news:[email protected]...
> Our space saving furnace is starting to make a whirring,
> tinny noise. Is this going to be as costly as it sounds?
>
> Thanks,
>
> s
>
Not only will it cost a bundle to fix, it won't save as much space in the
future. Get it taken care of soon so the space you've already saved is not
lost.
On Sun, 13 Dec 2009 15:35:37 -0500, the infamous [email protected]
scrawled the following:
>On Sun, 13 Dec 2009 01:13:06 -0600, sam <[email protected]> wrote:
>
>>Our space saving furnace is starting to make a whirring,
>>tinny noise. Is this going to be as costly as it sounds?
>>
>>Thanks,
>>
>>s
>On my furnace the fan on the inductor fan came loose on it's hub
>(about a year old). I brazed it up several years ago and it's been
>fine since. The dealer I bought it from went broke, and I'd have had
>to pay a dealer to come in and fix it, and then HOPE to get some of it
>back on Warranty - and the local dealers didn't have the part in stock
>- so I just fixed it myself.
One Atta Boy comin' atcha, clare.
--
Every day above ground is a Good Day(tm).
-----------