pP

[email protected] (Peter Ashby)

03/10/2003 7:53 PM

Groovy Question

My house has a few half round corner shelves, in pine. The shelves
appear to be from two to three edge joined boards and are quarter sawn.
On the underneath is a shallow groove running from 1/2 way down one
straight edge across to the same place on the other straight edge. Now
it occurs to me that this might be to prevent cupping, except that
grooves to prevent cupping usually run with the grain. Is my surmise
correct, and if so why across the grain, and why in quarter sawn? Just
curious.

Peter


This topic has 3 replies

pP

[email protected] (Peter Ashby)

in reply to [email protected] (Peter Ashby) on 03/10/2003 7:53 PM

03/10/2003 8:49 PM

Charlie Self <[email protected]> wrote:

> Peter Ashby asks:
>
> >My house has a few half round corner shelves, in pine. The shelves appear
> >to be from two to three edge joined boards and are quarter sawn. On the
> >underneath is a shallow groove running from 1/2 way down one straight
> >edge across to the same place on the other straight edge. Now it occurs
> >to me that this might be to prevent cupping, except that grooves to
> >prevent cupping usually run with the grain. Is my surmise correct, and if
> >so why across the grain, and why in quarter sawn? Just curious.
>
> Plate grooves. So you can stand display dishes on edge without special
> holders. Check the insides of most fancy corner cabinets, similar straight
> cabinets. Same thing.

Yes, that makes sense, turn it over and you have a plate groove.
Thankyou, I hate not knowing these things.

Peter

tT

in reply to [email protected] (Peter Ashby) on 03/10/2003 8:49 PM

04/10/2003 1:22 AM

>Yes, that makes sense, turn it over and you have a plate groove.
>Thankyou, I hate not knowing these things.
>
>Peter

I hate not knowing that I didn't know! Tom
Someday, it'll all be over....

cC

[email protected] (Charlie Self)

in reply to [email protected] (Peter Ashby) on 03/10/2003 7:53 PM

03/10/2003 8:32 PM

Peter Ashby asks:

>My house has a few half round corner shelves, in pine. The shelves
>appear to be from two to three edge joined boards and are quarter sawn.
>On the underneath is a shallow groove running from 1/2 way down one
>straight edge across to the same place on the other straight edge. Now
>it occurs to me that this might be to prevent cupping, except that
>grooves to prevent cupping usually run with the grain. Is my surmise
>correct, and if so why across the grain, and why in quarter sawn? Just
>curious.

Plate grooves. So you can stand display dishes on edge without special holders.
Check the insides of most fancy corner cabinets, similar straight cabinets.
Same thing.


Charlie Self

"The income tax has made liars out of more Americans than golf."
Will Rogers













You’ve reached the end of replies