Subject says it all.
Its laminated Pine w/ a tool tray w/ a few coats of shelac.
Top probaby needs to be redone due to years of use.
There is a patch in 1 corner due to a vise problem It had a few years ago.
Make me an offer.
Pics can be seen here:
http://trifs.dyndns.org/dscn2105.jpg
and
http://trifs.dyndns.org/dscn2106.jpg
again - its just the top - not the entire bench.
--
Thanks
Rob
You can reply to me at
r_b_v at v_e_r_z_e_r_a doht c_o_m
remove _ to get the correct address
Nice legs... ;+}
--
-Jim
©¿©¬
If you want to reply by email its --> ryan at jimryan dot com
Please use BCC and lets all avoid spam
"Rob V" <[email protected]> wrote in message
news:[email protected]...
> Subject says it all.
> Its laminated Pine w/ a tool tray w/ a few coats of shelac.
> Top probaby needs to be redone due to years of use.
> There is a patch in 1 corner due to a vise problem It had a few years ago.
>
>
> Make me an offer.
>
> Pics can be seen here:
> http://trifs.dyndns.org/dscn2105.jpg
> and
> http://trifs.dyndns.org/dscn2106.jpg
>
> again - its just the top - not the entire bench.
>
>
> --
> Thanks
> Rob
>
> You can reply to me at
> r_b_v at v_e_r_z_e_r_a doht c_o_m
>
> remove _ to get the correct address
>
>
Are you in/near Cary NC? (Noticed the Hendrick Chevrolet plate)
"Rob V" <[email protected]> wrote in message
news:[email protected]...
> Subject says it all.
> Its laminated Pine w/ a tool tray w/ a few coats of shelac.
> Top probaby needs to be redone due to years of use.
> There is a patch in 1 corner due to a vise problem It had a few years ago.
>
>
> Make me an offer.
>
> Pics can be seen here:
> http://trifs.dyndns.org/dscn2105.jpg
> and
> http://trifs.dyndns.org/dscn2106.jpg
>
> again - its just the top - not the entire bench.
>
>
> --
> Thanks
> Rob
>
> You can reply to me at
> r_b_v at v_e_r_z_e_r_a doht c_o_m
>
> remove _ to get the correct address
>
>
Sorry Bob, I didn't realize that my reply was cross-posted to other
boards (I know, I should have caught that). Regretfully, I assumed it
was just to triangle.forsale, which is for the Research Triangle Park
area of NC (Raleigh, Durham, Chapel Hill...I'm in Raleigh), all of which
is the 919 area code.
My bad.
RJC
Bob wrote:
> "RC" <[email protected]> wrote in message
> news:[email protected]...
>
>>I have a nearly identical workbench for sale as well. The top is
>>glued-together pine, hand planed, with a tray along the back, just like
>>Rob's. However, mine does come with legs (not as the nice as the one's
>>pictured holding up Rob's table). It also has a woodworking vise on the
>>front corner and another on the right end. The top is also drilled for
>>bench dogs.
>>Call or email if you want more info. Email if you want pictures.
>>
>>Make me an offer.
>>email: rjcress
>>email @
>>email hotmail.com
>>
>>phone: 421
>>number 4736
>>
>
>
> Where are you located and what is the areacode of your phone number?
>
> Bob
>
>
I have a nearly identical workbench for sale as well. The top is
glued-together pine, hand planed, with a tray along the back, just like
Rob's. However, mine does come with legs (not as the nice as the one's
pictured holding up Rob's table). It also has a woodworking vise on the
front corner and another on the right end. The top is also drilled for
bench dogs.
Call or email if you want more info. Email if you want pictures.
Make me an offer.
email: rjcress
email @
email hotmail.com
phone: 421
number 4736
Rob V wrote:
> Subject says it all.
> Its laminated Pine w/ a tool tray w/ a few coats of shelac.
> Top probaby needs to be redone due to years of use.
> There is a patch in 1 corner due to a vise problem It had a few years ago.
>
>
> Make me an offer.
>
> Pics can be seen here:
> http://trifs.dyndns.org/dscn2105.jpg
> and
> http://trifs.dyndns.org/dscn2106.jpg
>
> again - its just the top - not the entire bench.
>
>
"Rob V" <[email protected]> wrote in message
news:[email protected]...
> Subject says it all.
Not quite all. Where is it located?
"RC" <[email protected]> wrote in message
news:[email protected]...
> I have a nearly identical workbench for sale as well. The top is
> glued-together pine, hand planed, with a tray along the back, just like
> Rob's. However, mine does come with legs (not as the nice as the one's
> pictured holding up Rob's table). It also has a woodworking vise on the
> front corner and another on the right end. The top is also drilled for
> bench dogs.
> Call or email if you want more info. Email if you want pictures.
>
> Make me an offer.
> email: rjcress
> email @
> email hotmail.com
>
> phone: 421
> number 4736
>
Where are you located and what is the areacode of your phone number?
Bob