I'm refinishing an exterior front gate with a steel latch mechanism.
The gate is pretty massive, and when it hits the back side of the latch,
it bounces out of the groove that would otherwise make it closed.
Does anyone have an idea how to absorb some of that energy and have the
latch fall into the groove properly? (I wish I had a picture.)
I was thinking I might grind the top part down and add rubber where it
strikes the latch.
Fishing for tips,
--
Uno
Uno wrote:
> I'm refinishing an exterior front gate with a steel latch mechanism. The
> gate is pretty massive, and when it hits the back side of the latch, it
> bounces out of the groove that would otherwise make it closed.
>
> Does anyone have an idea how to absorb some of that energy and have the
> latch fall into the groove properly? (I wish I had a picture.)
>
> I was thinking I might grind the top part down and add rubber where it
> strikes the latch.
>
> Fishing for tips,
Would one of the old fashioned screen door catches work?
http://www.bicwarehouse.com/screen-door-catch-n192773.html?utm_medium=CJ&utm_campaign=1609763&utm_source=Affiliate&aff=cj
--
Jack Novak
Buffalo, NY - USA
[email protected]
"Uno" wrote:
> I'm refinishing an exterior front gate with a steel latch mechanism.
> The gate is pretty massive, and when it hits the back side of the
> latch, it bounces out of the groove that would otherwise make it
> closed.
>
> Does anyone have an idea how to absorb some of that energy and have
> the latch fall into the groove properly? (I wish I had a picture.)
--------------------------------
Standard hydraulic door closer.
They are designed to control heavy doors and gates.
Here in SoCal they are standard issue for a swimming pool fence.
Lew
"Nova" <[email protected]> wrote in message
news:[email protected]...
> Uno wrote:
>> I'm refinishing an exterior front gate with a steel latch
>> mechanism. The gate is pretty massive, and when it hits the
>> back side of the latch, it bounces out of the groove that would
>> otherwise make it closed.
>>
>> Does anyone have an idea how to absorb some of that energy and
>> have the latch fall into the groove properly? (I wish I had a
>> picture.)
I recall an old sceen door addition that might be the same thing.
It was a rubber ball on a short rod. As a screen door swung shut,
the centrifugal force would flip the ball out into the door's
edge, cushioning the slam. When it rebounded and swung shut
again, there'd be less force and gravity would hold the ball out
of the closure.
Nonny
>>
>> I was thinking I might grind the top part down and add rubber
>> where it strikes the latch.
>>
>> Fishing for tips,
>
> Would one of the old fashioned screen door catches work?
>
> http://www.bicwarehouse.com/screen-door-catch-n192773.html?utm_medium=CJ&utm_campaign=1609763&utm_source=Affiliate&aff=cj
>
> --
> Jack Novak
> Buffalo, NY - USA
> [email protected]
--
On most days,
it's just not worth
the effort of chewing
through the restraints..
Sounds like your latch check mechanism isn't working well. The ones I have
played with it seemed that the gate momentum forced the latch capture
mechanism in and this pivoted the top and it forced to hook over the latch
pin, capturing it until lifted again.
Either this one is a different style, the pivot is sticking, or the latch
isn't lining up with the catcher's mitt.
"Uno" <[email protected]> wrote in message
news:[email protected]...
I'm refinishing an exterior front gate with a steel latch mechanism.
The gate is pretty massive, and when it hits the back side of the latch,
it bounces out of the groove that would otherwise make it closed.
Does anyone have an idea how to absorb some of that energy and have the
latch fall into the groove properly? (I wish I had a picture.)
I was thinking I might grind the top part down and add rubber where it
strikes the latch.
Fishing for tips,
--
Uno
Lew Hodgett wrote:
> "Uno" wrote:
>
>> I'm refinishing an exterior front gate with a steel latch mechanism.
>> The gate is pretty massive, and when it hits the back side of the
>> latch, it bounces out of the groove that would otherwise make it
>> closed.
Was it always this way? If not, what changed? Change it back, if
possible? Like you said below, it's hard without a picture. Still, I
feel confident that it's probably nothing that money can't fix. : )
Bill
>>
>> Does anyone have an idea how to absorb some of that energy and have
>> the latch fall into the groove properly? (I wish I had a picture.)
> --------------------------------
> Standard hydraulic door closer.
>
> They are designed to control heavy doors and gates.
>
> Here in SoCal they are standard issue for a swimming pool fence.
>
> Lew
>
>