A local tool store is having a sale on a 7 piece Forstner wood bit
package. Regular price is $22.00 Can on sale for $8.00 Seems like it
is worth giving them a try for that price. Anyone tried a similar on '
sale ' on Forstner wood bit pack ?
on a similar topic - Has anyone tried those titanium coated drill bits ?
They are very brittle and are the worst twist drill bits I've ever
used. I will be sticking to HHS bits.
10-4
Icepick wrote:
> A local tool store is having a sale on a 7 piece Forstner wood bit
> package. Regular price is $22.00 Can on sale for $8.00 Seems like it
> is worth giving them a try for that price. Anyone tried a similar on '
> sale ' on Forstner wood bit pack ?
As old PT said, "there is a sucker born every minute".
Lew
Icepick:
I use these quite a bit. I bought a set about 5 years ago simply for
the size. They are good for having the exact size you need on
occasion, and they are easy to sharpen with the Dremel because the
steel is pretty soft. I really only use these for hobby stuff.
But for door hinges, etc., (Blum style Euros) I did buy the exact bit I
needed. It did not escape me that the American made Forstner bit for
cab hardware cost as much as my "box 'o bits".
RL
No offense, but just FYI:
They aren't titanium coated bits. They are titanium nitride coated,
which is a micron thin coating applied to the cutting surfaces of the
bits. You are right about them being brittle, but this has to do with
the cheap steel the bits themselves are made out of, and not the TiN
coating. I managed to get my hands on some professional TiN bits
intended for machine shop use and they worked great in my drill press.
BTW, drill bits aren't the only tool with a TiN coating. High
performance end mills for machining are also coated.
I bought a set of 16 'forstner' bits from Grizzly for about $30. They
came in a nice double-hinged box. They turned out to be mostly
saw-toothed bits. Only the three smallest were actually forstner. It
doesn't matter to me, they cut great. I don't know what the 'quality'
bits cut like but I think the imported Grizzly set is a heck of a
deal...
On Sat, 07 May 2005 00:34:23 GMT, "CW" <[email protected]> wrote:
>Actually, it is meant to help keep an edge longer and it works. You are
>quite correct that it is a lubricant. Helping chips slide off instead of
>adhering or trying to adhere results in lower local heating and abrasion,
>making the edge last longer. The difference is quite apparent when machining
>high strength stainless, titanium, inconel or other tough machining metals.
>No difference for wood however.
I was not sure about the edge part so I kept quiet (G)
--
Knight-Toolworks & Custom Planes
Custom made wooden planes at reasonable prices
See http://www.knight-toolworks.com For prices and ordering instructions.
--------------040106020207000800070306
Content-Type: text/plain; charset=us-ascii; format=flowed
Content-Transfer-Encoding: 7bit
I don't know if they come in a wood box.
Very likely these wood bits are made in China of some type of carbon
steel , with some kind of heat treat. Since I'm drilling in softwood
they don't have to be the best . If I pick up a pack of these el'cheapo
Forstner bits then will report how they worked.
Edwin Pawlowski wrote:
>"Icepick" <[email protected]> wrote in message
>news:[email protected]...
>
>
>>A local tool store is having a sale on a 7 piece Forstner wood bit package.
>>Regular price is $22.00 Can on sale for $8.00 Seems like it is worth
>>giving them a try for that price. Anyone tried a similar on ' sale ' on
>>Forstner wood bit pack ?
>>
>>
>
>Do they come in a wood box? I bought a low end set in a box. My plan was
>to use them and replace them as needed but I still have the nice wood case
>to keep them in. Of the seven piece set, I've replaced the 3/4" and 3/8" as
>they are the ones I've used the most. The other sizes have only seen few
>holes and they work well enough for that. It is a low cost way to have a
>selection of bits on hand "just in case"
>
>
--------------040106020207000800070306
Content-Type: text/html; charset=us-ascii
Content-Transfer-Encoding: 7bit
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html;charset=ISO-8859-1">
<title></title>
</head>
<body>
I don't know if they come in a wood box. <br>
<br>
Very likely these wood bits are made in China of some type of carbon steel
, with some kind of heat treat. Since I'm drilling in softwood they don't
have to be the best . If I pick up a pack of these el'cheapo Forstner bits
then will report how they worked.<br>
<br>
Edwin Pawlowski wrote:<br>
<blockquote type="cite"
cite="[email protected]">
<pre wrap="">"Icepick" <a class="moz-txt-link-rfc2396E" href="mailto:[email protected]"><[email protected]></a> wrote in message
<a class="moz-txt-link-freetext" href="news:[email protected]">news:[email protected]</a>...
</pre>
<blockquote type="cite">
<pre wrap="">A local tool store is having a sale on a 7 piece Forstner wood bit package.
Regular price is $22.00 Can on sale for $8.00 Seems like it is worth
giving them a try for that price. Anyone tried a similar on ' sale ' on
Forstner wood bit pack ?
</pre>
</blockquote>
<pre wrap=""><!---->
Do they come in a wood box? I bought a low end set in a box. My plan was
to use them and replace them as needed but I still have the nice wood case
to keep them in. Of the seven piece set, I've replaced the 3/4" and 3/8" as
they are the ones I've used the most. The other sizes have only seen few
holes and they work well enough for that. It is a low cost way to have a
selection of bits on hand "just in case"
</pre>
</blockquote>
<br>
</body>
</html>
--------------040106020207000800070306--
Thanks for the information.
Like most tools "you get what you pays for"
woodworker88 wrote:
>No offense, but just FYI:
>They aren't titanium coated bits. They are titanium nitride coated,
>which is a micron thin coating applied to the cutting surfaces of the
>bits. You are right about them being brittle, but this has to do with
>the cheap steel the bits themselves are made out of, and not the TiN
>coating. I managed to get my hands on some professional TiN bits
>intended for machine shop use and they worked great in my drill press.
>BTW, drill bits aren't the only tool with a TiN coating. High
>performance end mills for machining are also coated.
>
>
>
On Thu, 05 May 2005 11:10:35 GMT, Phisherman <[email protected]> wrote:
I don't think that anyone paying a buck a piece (US) is expecting great
quality.. *g*
>If these are made in Asia, chances are that they are not too good and
>don't expect too much.
>
>On Thu, 05 May 2005 01:38:13 GMT, Icepick <[email protected]>
>wrote:
>
>>A local tool store is having a sale on a 7 piece Forstner wood bit
>>package. Regular price is $22.00 Can on sale for $8.00 Seems like it
>>is worth giving them a try for that price. Anyone tried a similar on '
>>sale ' on Forstner wood bit pack ?
>>
>>on a similar topic - Has anyone tried those titanium coated drill bits ?
>> They are very brittle and are the worst twist drill bits I've ever
>>used. I will be sticking to HHS bits.
>>
>>10-4
>>
>>
>>
mac
Please remove splinters before emailing
On Thu, 05 May 2005 01:38:13 GMT, Icepick <[email protected]>
wrote:
>A local tool store is having a sale on a 7 piece Forstner wood bit
>package. Regular price is $22.00 Can on sale for $8.00
They're rubbish, but if you don't have them already, it's worth getting
them.
You'l also need something like a small diamond hone, because they're
blunt as anything when they arrive. When sharpened, they become usable,
if not good.
On Thu, 05 May 2005 01:38:13 GMT, Icepick <[email protected]> wrote:
>A local tool store is having a sale on a 7 piece Forstner wood bit
>package. Regular price is $22.00 Can on sale for $8.00 Seems like it
>is worth giving them a try for that price. Anyone tried a similar on '
>sale ' on Forstner wood bit pack ?
>
>on a similar topic - Has anyone tried those titanium coated drill bits ?
> They are very brittle and are the worst twist drill bits I've ever
>used. I will be sticking to HHS bits.
>
>10-4
>
>
>
I bought the large set from harbor Freight last year.. 16 TIN bits from 1/4" to
2 1/8" for $30 US, with the usual intent: start with a cheap collection in a
nice box and replace the ones that were used a lot with good ones..
So far, they all still do a great job and if I need more I'll buy the same or a
similar set... I was thinking of buying a good quality 2 1/8" for chuck turning,
but that would be over twice the cost of another set of cheap ones.. YMMV
mac
Please remove splinters before emailing
"Edwin Pawlowski" <[email protected]> wrote in message
news:[email protected]...
>The other sizes have only seen few
> holes and they work well enough for that. It is a low cost way to have a
> selection of bits on hand "just in case"
I got hooked on the Freud carbide forstner bits. They are so good that I
don't buy anything else. I just finished drilling twenty-seven 3/4" dog
holes in a rock maple bench top that is 40 years old. Talk about tough!
But the freud bit sliced through it like a surgeon's scalpel throwing off
fine curly shavings the whole way. When I finished it looked like the holes
had been machined.
Bob
"Icepick" <[email protected]> wrote in message
news:[email protected]...
>A local tool store is having a sale on a 7 piece Forstner wood bit package.
>Regular price is $22.00 Can on sale for $8.00 Seems like it is worth
>giving them a try for that price. Anyone tried a similar on ' sale ' on
>Forstner wood bit pack ?
Do they come in a wood box? I bought a low end set in a box. My plan was
to use them and replace them as needed but I still have the nice wood case
to keep them in. Of the seven piece set, I've replaced the 3/4" and 3/8" as
they are the ones I've used the most. The other sizes have only seen few
holes and they work well enough for that. It is a low cost way to have a
selection of bits on hand "just in case"
--
Ed
http://pages.cthome.net/edhome/
Icepick <[email protected]> writes:
> A local tool store is having a sale on a 7 piece Forstner wood bit
> package. Regular price is $22.00 Can on sale for $8.00 Seems like
> it is worth giving them a try for that price. Anyone tried a similar
> on ' sale ' on Forstner wood bit pack ?
One thing that these cheap Forstner's have a problem with is cutting
without the center guide point. (i.e. enlarging an existing hole,
cutting a slice near the edge, etc.) You need a drill press for that,
and they really vibrate like crazy when you try it.
--
Sending unsolicited commercial e-mail to this account incurs a fee of
$500 per message, and acknowledges the legality of this contract.
If these are made in Asia, chances are that they are not too good and
don't expect too much.
On Thu, 05 May 2005 01:38:13 GMT, Icepick <[email protected]>
wrote:
>A local tool store is having a sale on a 7 piece Forstner wood bit
>package. Regular price is $22.00 Can on sale for $8.00 Seems like it
>is worth giving them a try for that price. Anyone tried a similar on '
>sale ' on Forstner wood bit pack ?
>
>on a similar topic - Has anyone tried those titanium coated drill bits ?
> They are very brittle and are the worst twist drill bits I've ever
>used. I will be sticking to HHS bits.
>
>10-4
>
>
>
Actually, it is meant to help keep an edge longer and it works. You are
quite correct that it is a lubricant. Helping chips slide off instead of
adhering or trying to adhere results in lower local heating and abrasion,
making the edge last longer. The difference is quite apparent when machining
high strength stainless, titanium, inconel or other tough machining metals.
No difference for wood however.
"Steve Knight" <[email protected]> wrote in message
news:[email protected]...
>
> the TiN coating is only a lubricant. it is put on the tools to help the
ejection
> of metal chips. it is not meant to make the tool keep an edge longer. it
does
> not really work with wood either. so they are a waste of money.
> the right drill bit will drill materials faster then the wrong one. for
> woodworking drill bits with deep flutes will eject wood chips better.
> but the shape and design of the bit will make the performance difference
not the
> coating.
>
> --
> Knight-Toolworks & Custom Planes
> Custom made wooden planes at reasonable prices
> See http://www.knight-toolworks.com For prices and ordering instructions.
This is what I did too. The bits are cheap and there is noticable
runout when spinning in the drill press. But, for making holes that
don't have to be exact they're fine. If, you're going to use them for
joinery like making mortises I'd buy a good (read: expensive) forstner
bit.
Layne
On Thu, 05 May 2005 02:47:22 GMT, "Edwin Pawlowski" <[email protected]>
wrote:
>
>"Icepick" <[email protected]> wrote in message
>news:[email protected]...
>>A local tool store is having a sale on a 7 piece Forstner wood bit package.
>>Regular price is $22.00 Can on sale for $8.00 Seems like it is worth
>>giving them a try for that price. Anyone tried a similar on ' sale ' on
>>Forstner wood bit pack ?
>
>Do they come in a wood box? I bought a low end set in a box. My plan was
>to use them and replace them as needed but I still have the nice wood case
>to keep them in. Of the seven piece set, I've replaced the 3/4" and 3/8" as
>they are the ones I've used the most. The other sizes have only seen few
>holes and they work well enough for that. It is a low cost way to have a
>selection of bits on hand "just in case"
On Thu, 05 May 2005 01:38:13 GMT, Icepick <[email protected]>
wrote:
>A local tool store is having a sale on a 7 piece Forstner wood bit
>package. Regular price is $22.00 Can on sale for $8.00 Seems like it
>is worth giving them a try for that price. Anyone tried a similar on '
>sale ' on Forstner wood bit pack ?
>
I bought a 7-piece set of Forsners for $20 about 8 or 9 months ago,
and they work just fine for me. They're probably not going to last
for 20 years, but they're certainly functional, and they leave a nice
clean flat-bottomed hole like you'd expect. The brand name was
"Columbian"
Aut inveniam viam aut faciam
I managed to get my hands on some professional TiN bits
>>intended for machine shop use and they worked great in my drill press.
>>BTW, drill bits aren't the only tool with a TiN coating. High
>>performance end mills for machining are also coated.
the TiN coating is only a lubricant. it is put on the tools to help the ejection
of metal chips. it is not meant to make the tool keep an edge longer. it does
not really work with wood either. so they are a waste of money.
the right drill bit will drill materials faster then the wrong one. for
woodworking drill bits with deep flutes will eject wood chips better.
but the shape and design of the bit will make the performance difference not the
coating.
--
Knight-Toolworks & Custom Planes
Custom made wooden planes at reasonable prices
See http://www.knight-toolworks.com For prices and ordering instructions.