Ok I have a Rexon BS3050AL bandsaw, in the manual it tells me it uses a
2312mm blade length, i'm trying to get some blades for it when I look on
www.screwfix.com, it gives me blades in inches, now here is my problem,
unless my math has went tits up my blade length is 91" or there about,
that can't be right, for a bandsaw with a cut helght of just under 6
inches, there is no way it uses a 91 inch blade! it is not even tall
enought to use a 91inch blade, could some kind soulu go onto screwfix
and point me in the right direction, of which size blade that would fit.?
Thanks
Eddy
try contacting Rexon directly at:
http://www.rexon.co.uk/
Eddy wrote:
> Ok I have a Rexon BS3050AL bandsaw, in the manual it tells me it uses a
> 2312mm blade length, i'm trying to get some blades for it when I look on
> www.screwfix.com, it gives me blades in inches, now here is my problem,
> unless my math has went tits up my blade length is 91" or there about,
> that can't be right, for a bandsaw with a cut helght of just under 6
> inches, there is no way it uses a 91 inch blade! it is not even tall
> enought to use a 91inch blade, could some kind soulu go onto screwfix
> and point me in the right direction, of which size blade that would fit.?
>
> Thanks
>
> Eddy
Try This site.
http://www.cherrytreetoys.com/store/products.asp?dept=246&pagenumber=1
I have bought some blades from them and think they are reasonable
prices. Have not tried them out yet though.
John
Eddy wrote:
> DJ Delorie wrote:
>
>> In comparison, the Delta 14" bandsaw uses a 93 1/2" blade. It also
>> has a 6" cut height.
>>
>> The 91" is the total length of the blade, not the height of your
>> bandsaw.
>
> I just measured the blade and it is right!, now I have to find a
> supplyer for 91" blades!, screwfix have none!.
>
> Any Ideas?
>
> Thanks
>
> Eddy
Eddy wrote:
> Ok I have a Rexon BS3050AL bandsaw, in the manual it tells me it uses a
> 2312mm blade length, i'm trying to get some blades for it when I look on
> www.screwfix.com, it gives me blades in inches, now here is my problem,
> unless my math has went tits up my blade length is 91" or there about,
> that can't be right, for a bandsaw with a cut helght of just under 6
> inches, there is no way it uses a 91 inch blade! it is not even tall
> enought to use a 91inch blade, could some kind soulu go onto screwfix
> and point me in the right direction, of which size blade that would fit.?
>
> Thanks
>
> Eddy
Eddy, another source of blades might be your local "Yellow Pages." I have a
friend of mine who goes to his local cutting machine supplier and has them
make him up a blade, whenever he needs one. Just a thought.
Deb
DJ Delorie wrote:
> In comparison, the Delta 14" bandsaw uses a 93 1/2" blade. It also
> has a 6" cut height.
>
> The 91" is the total length of the blade, not the height of your
> bandsaw.
I just measured the blade and it is right!, now I have to find a
supplyer for 91" blades!, screwfix have none!.
Any Ideas?
Thanks
Eddy
"Eddy" <[email protected]> wrote in message
news:[email protected]...
> DJ Delorie wrote:
>> In comparison, the Delta 14" bandsaw uses a 93 1/2" blade. It also
>> has a 6" cut height.
>>
>> The 91" is the total length of the blade, not the height of your
>> bandsaw.
> I just measured the blade and it is right!, now I have to find a supplyer
> for 91" blades!, screwfix have none!.
>
> Any Ideas?
>
> Thanks
>
> Eddy
Eddy, use
www.rutlands.co.uk or www.axminster.co.uk
Grumble