From Craigslist:
http://providence.craigslist.org/mat/507255077.html
I have about 600 sheets of 5x12 plywood 5/8 thick Im selling it for
$5.00 a sheet these are brand new not used if you figure the square
footage it equals just as much as 2 4x8 sheets put together you can
purchase as much or as little as you want delivery available call
rocky (401)269-9934
Man, I wish I had a project for it and lived a bit nearer!
R
On Dec 13, 1:24 pm, "J. Clarke" <[email protected]> wrote:
> Don wrote:
> > "N Hurst"> wrote
> >> On Dec 13, 8:29 am, RicodJour <[email protected]> wrote:
> >>> From
> >>> Craigslist:http://providence.craigslist.org/mat/507255077.html
> >>> I have about 600 sheets of 5x12 plywood 5/8 thick Im selling it
> >>> for
> >>> $5.00 a sheet these are brand new not used if you figure the
> >>> square
> >>> footage it equals just as much as 2 4x8 sheets put together you
> >>> can
> >>> purchase as much or as little as you want delivery available call
> >>> rocky (401)269-9934
>
> >>> Man, I wish I had a project for it and lived a bit nearer!
>
> >>> R
>
> >> I could cover all the walls in my shop for less than $50 with that
> >> stuff... yeesh
>
> > If that stuff was close by, I'd scarf up about 100 sheets right now.
> > I'd finish out the shop interior and bank the rest.
> > Wonder how someone ends up with that much surplus of a special order
> > product?
>
> Read the ad very carefully. The one here says "plywood" but the on
> one Craigslist says "plywood" in the header and "particle board" in
> the body. If it was plywood I'd be sorely tempted to rent a truck and
> take a drive over, but for particle board, nahhh. . . .
That's really odd - you're the second person to mention the particle
board, but I just checked back and the listing still shows 5/8" 'thik'
plywood - mentioned in the title and in the body of the listing.
Probably worth a call for someone to verify. If I were building a
house, I'd grab it for a nice upgrade/downprice for the roof and wall
sheathing.
R
On Dec 13, 8:29 am, RicodJour <[email protected]> wrote:
> From Craigslist:http://providence.craigslist.org/mat/507255077.html
> I have about 600 sheets of 5x12 plywood 5/8 thick Im selling it for
> $5.00 a sheet these are brand new not used if you figure the square
> footage it equals just as much as 2 4x8 sheets put together you can
> purchase as much or as little as you want delivery available call
> rocky (401)269-9934
>
> Man, I wish I had a project for it and lived a bit nearer!
>
> R
I could cover all the walls in my shop for less than $50 with that
stuff... yeesh
On Dec 13, 9:58 am, John Martin <[email protected]> wrote:
> On Dec 13, 8:29 am, RicodJour <[email protected]> wrote:
>
> > From Craigslist:http://providence.craigslist.org/mat/507255077.html
> > I have about 600 sheets of 5x12 plywood 5/8 thick Im selling it for
> > $5.00 a sheet these are brand new not used if you figure the square
> > footage it equals just as much as 2 4x8 sheets put together you can
> > purchase as much or as little as you want delivery available call
> > rocky (401)269-9934
>
> > Man, I wish I had a project for it and lived a bit nearer!
>
> > R
>
> Check the Craigslist listing and it now says particle board, not
> plywood. Still a great price if it's in decent condition - maybe
> we'll hear from someone who has bought some.
> John Martin
I guess I could build 600 snooker tables or ping pong tables.
How about one 2400 yard mini-putt course.
Ken
RicodJour wrote:
>From Craigslist:
>http://providence.craigslist.org/mat/507255077.html
>I have about 600 sheets of 5x12 plywood 5/8 thick Im selling it for
>$5.00 a sheet these are brand new not used if you figure the square
>footage it equals just as much as 2 4x8 sheets put together you can
>purchase as much or as little as you want delivery available call
>rocky (401)269-9934
>
>Man, I wish I had a project for it and lived a bit nearer!
>
>R
>
>
Just like the guy with 20 large apartments worth of Brazilian cherry for
2 bucks a square feel, these deals are never where you need them to make
the better buck, and even if they were, the time between spec to hunt
and gather to install can be huge.
On Dec 13, 4:14 pm, "J. Clarke" <[email protected]> wrote:
>
> Refresh the page. The one with "plywood" is probably cached in your
> browser.
To tell you the sort of day I've been having, I cleared my cookies and
not my cache. Hoo boy.
Big difference between particle board and plywood... Still a deal -
big sheet 5/8" at $5 would tickle a cabinet shop.
R
On Dec 13, 8:29 am, RicodJour <[email protected]> wrote:
> From Craigslist:http://providence.craigslist.org/mat/507255077.html
> I have about 600 sheets of 5x12 plywood 5/8 thick Im selling it for
> $5.00 a sheet these are brand new not used if you figure the square
> footage it equals just as much as 2 4x8 sheets put together you can
> purchase as much or as little as you want delivery available call
> rocky (401)269-9934
>
> Man, I wish I had a project for it and lived a bit nearer!
>
> R
Check the Craigslist listing and it now says particle board, not
plywood. Still a great price if it's in decent condition - maybe
we'll hear from someone who has bought some.
John Martin
"N Hurst"> wrote
> On Dec 13, 8:29 am, RicodJour <[email protected]> wrote:
>> From Craigslist:http://providence.craigslist.org/mat/507255077.html
>> I have about 600 sheets of 5x12 plywood 5/8 thick Im selling it for
>> $5.00 a sheet these are brand new not used if you figure the square
>> footage it equals just as much as 2 4x8 sheets put together you can
>> purchase as much or as little as you want delivery available call
>> rocky (401)269-9934
>>
>> Man, I wish I had a project for it and lived a bit nearer!
>>
>> R
>
> I could cover all the walls in my shop for less than $50 with that
> stuff... yeesh
If that stuff was close by, I'd scarf up about 100 sheets right now.
I'd finish out the shop interior and bank the rest.
Wonder how someone ends up with that much surplus of a special order
product?
Don wrote:
> "N Hurst"> wrote
>> On Dec 13, 8:29 am, RicodJour <[email protected]> wrote:
>>> From
>>> Craigslist:http://providence.craigslist.org/mat/507255077.html
>>> I have about 600 sheets of 5x12 plywood 5/8 thick Im selling it
>>> for
>>> $5.00 a sheet these are brand new not used if you figure the
>>> square
>>> footage it equals just as much as 2 4x8 sheets put together you
>>> can
>>> purchase as much or as little as you want delivery available call
>>> rocky (401)269-9934
>>>
>>> Man, I wish I had a project for it and lived a bit nearer!
>>>
>>> R
>>
>> I could cover all the walls in my shop for less than $50 with that
>> stuff... yeesh
>
> If that stuff was close by, I'd scarf up about 100 sheets right now.
> I'd finish out the shop interior and bank the rest.
> Wonder how someone ends up with that much surplus of a special order
> product?
Read the ad very carefully. The one here says "plywood" but the on
one Craigslist says "plywood" in the header and "particle board" in
the body. If it was plywood I'd be sorely tempted to rent a truck and
take a drive over, but for particle board, nahhh. . . .
--
--
--John
to email, dial "usenet" and validate
(was jclarke at eye bee em dot net)
"John Martin" <[email protected]> wrote in message
news:de4b7f09-e858-4bf6-b85a-ff7dbe9c19d1@e23g2000prf.googlegroups.com...
> On Dec 13, 8:29 am, RicodJour <[email protected]> wrote:
>> From Craigslist:http://providence.craigslist.org/mat/507255077.html
>> I have about 600 sheets of 5x12 plywood 5/8 thick Im selling it for
>> $5.00 a sheet these are brand new not used if you figure the square
>> footage it equals just as much as 2 4x8 sheets put together you can
>> purchase as much or as little as you want delivery available call
>> rocky (401)269-9934
>>
>> Man, I wish I had a project for it and lived a bit nearer!
>>
>> R
>
> Check the Craigslist listing and it now says particle board, not
> plywood.
There's a difference? ; )
--
MichaelB
www.michaelbulatovich.ca
"John Martin" <[email protected]> wrote in message
news:de4b7f09-e858-4bf6-b85a-ff7dbe9c19d1@e23g2000prf.googlegroups.com...
> On Dec 13, 8:29 am, RicodJour <[email protected]> wrote:
>> From Craigslist:http://providence.craigslist.org/mat/507255077.html
>> I have about 600 sheets of 5x12 plywood 5/8 thick Im selling it for
>> $5.00 a sheet these are brand new not used if you figure the square
>> footage it equals just as much as 2 4x8 sheets put together you can
>> purchase as much or as little as you want delivery available call
>> rocky (401)269-9934
>>
>> Man, I wish I had a project for it and lived a bit nearer!
>>
>> R
>
> Check the Craigslist listing and it now says particle board, not
> plywood. Still a great price if it's in decent condition - maybe
> we'll hear from someone who has bought some.
>
> John Martin
OK that tears it, lemme outta my verbal. LOL
Its still a good deal but it won't serve my purpose.
"RicodJour" <[email protected]> wrote in message
news:13c6b2a2-8e6b-473c-a32c-ba72d4004a32@d27g2000prf.googlegroups.com...
> On Dec 13, 1:24 pm, "J. Clarke" <[email protected]> wrote:
>> Don wrote:
>> > "N Hurst"> wrote
>> >> On Dec 13, 8:29 am, RicodJour <[email protected]> wrote:
>> >>> From
>> >>> Craigslist:http://providence.craigslist.org/mat/507255077.html
>> >>> I have about 600 sheets of 5x12 plywood 5/8 thick Im selling it
>> >>> for
>> >>> $5.00 a sheet these are brand new not used if you figure the
>> >>> square
>> >>> footage it equals just as much as 2 4x8 sheets put together you
>> >>> can
>> >>> purchase as much or as little as you want delivery available call
>> >>> rocky (401)269-9934
>>
>> >>> Man, I wish I had a project for it and lived a bit nearer!
>>
>> >>> R
>>
>> >> I could cover all the walls in my shop for less than $50 with that
>> >> stuff... yeesh
>>
>> > If that stuff was close by, I'd scarf up about 100 sheets right now.
>> > I'd finish out the shop interior and bank the rest.
>> > Wonder how someone ends up with that much surplus of a special order
>> > product?
>>
>> Read the ad very carefully. The one here says "plywood" but the on
>> one Craigslist says "plywood" in the header and "particle board" in
>> the body. If it was plywood I'd be sorely tempted to rent a truck and
>> take a drive over, but for particle board, nahhh. . . .
>
> That's really odd - you're the second person to mention the particle
> board, but I just checked back and the listing still shows 5/8" 'thik'
> plywood - mentioned in the title and in the body of the listing.
> Probably worth a call for someone to verify. If I were building a
> house, I'd grab it for a nice upgrade/downprice for the roof and wall
> sheathing.
Ya'll talkin about 2 different ads?
"++" <[email protected]> wrote in message
news:[email protected]...
>
>
> RicodJour wrote:
>
>>From Craigslist:
>>http://providence.craigslist.org/mat/507255077.html
>>I have about 600 sheets of 5x12 plywood 5/8 thick Im selling it for
>>$5.00 a sheet these are brand new not used if you figure the square
>>footage it equals just as much as 2 4x8 sheets put together you can
>>purchase as much or as little as you want delivery available call
>>rocky (401)269-9934
>>
>>Man, I wish I had a project for it and lived a bit nearer!
>>
>>R
>>
>
> Just like the guy with 20 large apartments worth of Brazilian cherry for 2
> bucks a square feel, these deals are never where you need them to make the
> better buck, and even if they were, the time between spec to hunt and
> gather to install can be huge.
The Nature of Markets.
Don wrote:
> "RicodJour" <[email protected]> wrote in message
> news:13c6b2a2-8e6b-473c-a32c-ba72d4004a32@d27g2000prf.googlegroups.com...
>> On Dec 13, 1:24 pm, "J. Clarke" <[email protected]> wrote:
>>> Don wrote:
>>>> "N Hurst"> wrote
>>>>> On Dec 13, 8:29 am, RicodJour <[email protected]> wrote:
>>>>>> From
>>>>>> Craigslist:http://providence.craigslist.org/mat/507255077.html
>>>>>> I have about 600 sheets of 5x12 plywood 5/8 thick Im selling it
>>>>>> for
>>>>>> $5.00 a sheet these are brand new not used if you figure the
>>>>>> square
>>>>>> footage it equals just as much as 2 4x8 sheets put together you
>>>>>> can
>>>>>> purchase as much or as little as you want delivery available
>>>>>> call
>>>>>> rocky (401)269-9934
>>>
>>>>>> Man, I wish I had a project for it and lived a bit nearer!
>>>
>>>>>> R
>>>
>>>>> I could cover all the walls in my shop for less than $50 with
>>>>> that
>>>>> stuff... yeesh
>>>
>>>> If that stuff was close by, I'd scarf up about 100 sheets right
>>>> now. I'd finish out the shop interior and bank the rest.
>>>> Wonder how someone ends up with that much surplus of a special
>>>> order product?
>>>
>>> Read the ad very carefully. The one here says "plywood" but the
>>> on
>>> one Craigslist says "plywood" in the header and "particle board"
>>> in
>>> the body. If it was plywood I'd be sorely tempted to rent a truck
>>> and take a drive over, but for particle board, nahhh. . . .
>>
>> That's really odd - you're the second person to mention the
>> particle
>> board, but I just checked back and the listing still shows 5/8"
>> 'thik' plywood - mentioned in the title and in the body of the
>> listing. Probably worth a call for someone to verify. If I were
>> building a house, I'd grab it for a nice upgrade/downprice for the
>> roof and wall sheathing.
>
> Ya'll talkin about 2 different ads?
Refresh the page. The one with "plywood" is probably cached in your
browser.
--
--
--John
to email, dial "usenet" and validate
(was jclarke at eye bee em dot net)