On 6/15/2017 5:33 PM, Meanie wrote:
> On 6/15/2017 5:58 PM, Gramps' shop wrote:
>> Fixing the grill and needed to grind off a couple of badly rusted
>> screws. Looking for recommendations for 2 part epoxy that can
>> withstand grill temps up to 600.
>>
>
> I'm not sure I follow...if you grinded off screws, why not replace the
> screws?
Neither do I. JB-Weld Highheat is rated at 400 degrees continuous and
up to 550 degrees intermittently.
If you ground off screws, the first thing you should attempt to do is
replace it a SS screw or maybe drill it out and put in a nut & bolt or,
maybe, a stainless steel Pop rivet?
I would really worry, depending upon where the repair is made, about
failure during use and the fire hazard or just trying to implement the
famous (in infamous) "3 Second Rule" when those nice steaks are on the
ground. ;-)
On 6/16/2017 10:45 PM, Electric Comet wrote:
> On Thu, 15 Jun 2017 14:58:19 -0700 (PDT)
> "Gramps' shop" <[email protected]> wrote:
>
>> Fixing the grill and needed to grind off a couple of badly rusted
>> screws. Looking for recommendations for 2 part epoxy that can
>> withstand grill temps up to 600.
>
> doubt there is any jb weld would go up that hi but check their site
>
> but before that check craigslist
> i see good grills on there all the time
> maybe people are eating more plants now
> although grilled plants are good too
>
JB is only good to 450 degrees. Most others are 300 to 400 deg.
There is one product made to go to 600 degrees though, made by Cotronics.
https://measuretech.com.au/high-temperature/49-duralco-4700-ultra-high-temperature-epoxy.html
Problem solved. Glad I could help.
On 6/15/2017 3:58 PM, Gramps' shop wrote:
> Fixing the grill and needed to grind off a couple of badly rusted screws. Looking for recommendations for 2 part epoxy that can withstand grill temps up to 600.
>
BLUE MAGIC quick steel extreme high temperature metal repair withstands
temperatures up to 2400 degrees Fahrenheit, 1300 degrees Celsius, sets
in five minutes, steel hard in 15 minutes, full cure in one hour. It can
be drilled, tapped, file, machined, sanded and painted. Withstands
direct flame, welds holes and cracks in iron and steel.
http://www.autozone.com/sealants-glues-adhesives-and-tape/epoxy-compound/blue-magic-qs-high-temperature-metal-repair-trilingual/515553_0_0
On Thu, 15 Jun 2017 14:58:19 -0700 (PDT), "Gramps' shop"
<[email protected]> wrote:
>Fixing the grill and needed to grind off a couple of badly rusted screws. Looking for recommendations for 2 part epoxy that can withstand grill temps up to 600.
Stainless steel screws.
On 6/15/2017 8:08 PM, Gramps' shop wrote:
> Grinder off the heads. Remainder still fills the holes. I really don't want to drill them out.
>
I would suggest drilling out the rest and replacing with screws but if
you're adamant on epoxy, the Blue Magic suggested by JW is a good
option. I've used it with good results but not with high temperatures
you seek.
On Thu, 15 Jun 2017 14:58:19 -0700 (PDT)
"Gramps' shop" <[email protected]> wrote:
> Fixing the grill and needed to grind off a couple of badly rusted
> screws. Looking for recommendations for 2 part epoxy that can
> withstand grill temps up to 600.
doubt there is any jb weld would go up that hi but check their site
but before that check craigslist
i see good grills on there all the time
maybe people are eating more plants now
although grilled plants are good too