Eddie wrote:
> Hi All, can anybody tell me where I can get hold of router templates? i.e.
> flowers, hearts, animals etc.
> thanks, Eddie.
One way, is to create a drawing, either by tracing a print-out or
download.
If you want a big one, go to a local blue-print shop and have a blow up
made.
Glue the result onto 1/2" MDF with spray contact adhesive. Cut out your
desired path.
Voila!
*Cut out your desired path*..wtf?? Is this some kinda Zen thing? A
Buddhist thing?
Buddhist to hotdog vendor: "Make me one with everything."
But I digress.
r
Sun, Aug 27, 2006, 10:13am (EDT-3) [email protected] (Robatoy) doth
instructeth:
One way, is to create a drawing, either by tracing a print-out or
download.
If you want a big one, go to a local blue-print shop and have a blow up
made.
Glue the result onto 1/2" MDF with spray contact adhesive. Cut <snip>
Some I draws, some I prints. It's 20+ miles to a place I could get
a biggun printed, so I draw big, or just zoom up on a Xerox machine,
trim, and glue down - works for me. Or, could make, or buy, a
pantograph - I've got a beeyootiful English one out of boxwood, but
never use it. I use thinned Titebond II for gluing, usually on 1/2"
plywood - ometimes modify them later and plywood works well for that.
Myself, I never buy templates, I've never seen a design yet I'd be happy
with, so I make my own - wreck one, make a replacement, quick, easy,
inexpensively - try that with a store-bought one. Plus, excepting time
involved, mine cost maybe $2 (U.S.) mex (almost 48" tall), from new
plywood, and depending on size. Most of 'em are probably in the
$.25-$.50 range, my chess pieces pennies each.
JOAT
Justice was invented by the innocent.
Mercy and lawyers were invented by the guilty.
Eddie wrote:
> I forgot to mention I am in Holland. they are a bit backward here concerning
> woodworking except for making clogs!
> "Eddie" <[email protected]> wrote in message
> news:[email protected]...
> > Hi All, can anybody tell me where I can get hold of router templates? i.e.
> > flowers, hearts, animals etc.
> > thanks, Eddie.
> >
Eddie...dat was niet lief van jou omdat te zeggen. (Eddie, that wasn't
a loving thing to say)
I have seen spectacular woodwork done in Holland. Unless you don't
count boats and windmills.
Clogs are mostly CNC'd these days....for the tourists.
r
Eddie (in [email protected]) said:
| Hi All, can anybody tell me where I can get hold of router
| templates? i.e. flowers, hearts, animals etc.
Check Lee Valley www.leevalley.com, Woodcraft Supply
www.woodcraft.com, Rockler www.rockler.com, and MLCS
www.mlcswoodworking.com.
If you can't find what you're looking for, send me a sketch and some
dimensions - and I'll send you a price.
--
Morris Dovey
DeSoto Solar
DeSoto, Iowa USA
http://www.iedu.com/DeSoto
I forgot to mention I am in Holland. they are a bit backward here concerning
woodworking except for making clogs!
"Eddie" <[email protected]> wrote in message
news:[email protected]...
> Hi All, can anybody tell me where I can get hold of router templates? i.e.
> flowers, hearts, animals etc.
> thanks, Eddie.
>
Sun, Aug 27, 2006, 7:45pm (EDT+6) [email protected] (Eddie) doth
divulgeth:
I forgot to mention I am in Holland. they are a bit backward here
concerning woodworking except for making clogs!
No prob. There are even people on here from California. They are
often a bit backward period.
JOAT
Justice was invented by the innocent.
Mercy and lawyers were invented by the guilty.
Mon, Aug 28, 2006, 11:23am (EDT+4)
[email protected] (Rick=A0M) doth sayeth:
and here I thought it was "I digest".
Maybe "degrade".
JOAT
Justice was invented by the innocent.
Mercy and lawyers were invented by the guilty.
Eddie wrote:
> Hi All, can anybody tell me where I can get hold of router templates?
> i.e. flowers, hearts, animals etc.
> thanks, Eddie.
In routing jigs and accessories
http://www.trendmachinery.co.uk/catindex/
Although you only need to draw an outline on thin ply and cut them out with
a needle router bit.
--
Sir Benjamin Middlethwaite
On Sun, 27 Aug 2006 18:28:16 +0200, "Eddie" <[email protected]>
wrote:
>Hi All, can anybody tell me where I can get hold of router templates? i.e.
>flowers, hearts, animals etc.
>thanks, Eddie.
>
I make my own usually out of hardboard. Unfortunately I don't have a
scroll saw (yet) so I use a jigsaw with a small blade. I have the
templates hanging all over my shop walls.
A bit OT, but what do you mean,"a bit backwards here concerning
woodworking"? (I'm in Texas).
"Eddie" <[email protected]> wrote in message
news:[email protected]...
>I forgot to mention I am in Holland. they are a bit backward here
>concerning woodworking except for making clogs!
> "Eddie" <[email protected]> wrote in message
> news:[email protected]...
>> Hi All, can anybody tell me where I can get hold of router templates?
>> i.e. flowers, hearts, animals etc.
>> thanks, Eddie.
>>
>
>