On Apr 13, 8:31=A0am, "CM" <[email protected]> wrote:
> I just bought a used Robland X31 Combo machine and need to sharpen the
> planer/jointer blades. I do own a Tormek and wondered if anyone has used t=
he
> planer blade sharpening jig and how it worked out for them?
>
> Thanks,
>
> cm
CM
i have used the Tormek planer/jointer sharpening jig and found it
worked very well.
William Swinehart
World Gift Shoppes
http://www.worldgiftshoppes.com
In article <[email protected]>, "CM" <[email protected]> wrote:
>I just bought a used Robland X31 Combo machine and need to sharpen the
>planer/jointer blades. I do own a Tormek and wondered if anyone has used the
>planer blade sharpening jig and how it worked out for them?
Yep. Works well, but be careful to use very light pressure -- just rest your
hands lightly on the jig, applying very little pressure beyond the weight of
the jig itself. Too much pressure, and you'll wind up grinding waves into
them. DAMHIKT. Don't be in a hurry. Patience will be rewarded.
--
Regards,
Doug Miller (alphageek at milmac dot com)
It's time to throw all their damned tea in the harbor again.
In article <[email protected]>, Han <[email protected]> wrote:
>[email protected] (Doug Miller) wrote in
>news:[email protected]:
>
>> In article <[email protected]>,
>> "CM" <[email protected]> wrote:
>>>I just bought a used Robland X31 Combo machine and need to sharpen the
>>>planer/jointer blades. I do own a Tormek and wondered if anyone has
>>>used the planer blade sharpening jig and how it worked out for them?
>>
>> Yep. Works well, but be careful to use very light pressure -- just
>> rest your hands lightly on the jig, applying very little pressure
>> beyond the weight of the jig itself. Too much pressure, and you'll
>> wind up grinding waves into them. DAMHIKT. Don't be in a hurry.
>> Patience will be rewarded.
>>
>
>Doug, could you please repost how to get an updated spamfilter?
>
Sure thing -- see my sig below. It'll be in a separate post, too, in order to
make it visible outside this thread.
--
Regards,
Doug Miller (alphageek-at-milmac-dot-com)
Get a copy of my NEW AND IMPROVED TrollFilter for NewsProxy/Nfilter
by sending email to autoresponder at filterinfo-at-milmac-dot-com
You must use your REAL email address to get a response.
Download Nfilter at http://www.milmac.com/np-120.exe
"CM" <[email protected]> wrote in message
news:[email protected]...
>I just bought a used Robland X31 Combo machine and need to sharpen the
>planer/jointer blades. I do own a Tormek and wondered if anyone has used
>the planer blade sharpening jig and how it worked out for them?
>
> Thanks,
>
> cm
>
I have the jig and it works well.
[email protected] (Doug Miller) wrote in
news:[email protected]:
> In article <[email protected]>,
> "CM" <[email protected]> wrote:
>>I just bought a used Robland X31 Combo machine and need to sharpen the
>>planer/jointer blades. I do own a Tormek and wondered if anyone has
>>used the planer blade sharpening jig and how it worked out for them?
>
> Yep. Works well, but be careful to use very light pressure -- just
> rest your hands lightly on the jig, applying very little pressure
> beyond the weight of the jig itself. Too much pressure, and you'll
> wind up grinding waves into them. DAMHIKT. Don't be in a hurry.
> Patience will be rewarded.
>
Doug, could you please repost how to get an updated spamfilter?
--
Best regards
Han
email address is invalid