I saw the Jointech Smart Miter (JSM-48) at our wood show here in
Detroit and was quite impressed. There are several very well thought
out ideas incorporated in this jig. The one that is REALLY intriging
is the concept it has in keeping the edge of the miter fence exactly at
the blade cutting edge no matter what angle the jig is set for. I
understand that this is controlled by the arc and not the connection at
the hinge point. The presentation made a very good impression about
how repeatable and accurate the jig is.
However, I have been hearing mixed reviews from owners. Are any of you
owners of this jig? Can you give me your impressions of how you like
your jig.
How well does the unique method of keeping the right miter edge at the
cutting edge of the saw work over time?
What is your experience with the Jointech people?
The base price I find is $259. Is that the going rate everywhere?
Thanks for the reply.
Leon wrote:
> "eganders" <[email protected]> wrote in message
> news:[email protected]...
> >I saw the Jointech Smart Miter (JSM-48) at our wood show here in
> > Detroit and was quite impressed. There are several very well thought
> > out ideas incorporated in this jig. The one that is REALLY intriging
> > is the concept it has in keeping the edge of the miter fence exactly at
> > the blade cutting edge no matter what angle the jig is set for. I
> > understand that this is controlled by the arc and not the connection at
> > the hinge point. The presentation made a very good impression about
> > how repeatable and accurate the jig is.
> >
> > However, I have been hearing mixed reviews from owners. Are any of you
> > owners of this jig? Can you give me your impressions of how you like
> > your jig.
> >
> > How well does the unique method of keeping the right miter edge at the
> > cutting edge of the saw work over time?
> >
> > What is your experience with the Jointech people?
> >
> > The base price I find is $259. Is that the going rate everywhere?
> >
>
> I went through this decision about 6 years ago. The Jointech sled is pretty
> cool however I ended up being very happy with the left and right side Dubby
> jig.
> For me, strikes against the Jointech were that you could not easily cut wide
> panels with it. The jig is designed more for boards rather than panels. I
> can cut wider panels with the Dubby.
> Additionally, while I chose to buy 2 Dubby jigs, left and right both were
> only slightly more expensive than the Jointech, IIRC about $269, 6 years ago
> at show prices.
> The reason that I bought both left and right is that I did not want to point
> my wood in different directions when cutting + or - from 90 degree cuts.
> Basically, with the jig on the left side of the blade and having the leading
> end of the fence on the left side and trailing end on the blade side you can
> make a pretty clean cut. When cutting complementary asymmetrical molding
> angles you have to set the fence with the leading end of the fence on the
> right side close to the blade and the trailing end of the fence on the left
> side. With this set up the back side of the cut is more likely to have tear
> out as the blade angle is acute vs. obtus when exiting the back side of the
> wood. The more acute the exiting cutting angle the more the wood is likely
> to have tear out.
> With the left and right Dubby jigs you can cut miters on either side of the
> blade with the trailing end of the fence always near the blade.
> Last, No big deal if you want to cut compound angles or bevel cuts Tilt the
> blade with out worry of cutting the sled and just use the sled on the
> opposite side of the blade tilt if you buy both sleds.
> The Jointech has the edge with the adjustable miter guide bar and adjustable
> fence for blade clearance. I find the miter gauge bar being fixed on the
> Dubby to not be a problem as I never intend to change saws. When I need the
> fence to be closer to the blade I use a sacrificial fence.
"eganders" <[email protected]> wrote in message
news:[email protected]...
>I saw the Jointech Smart Miter (JSM-48) at our wood show here in
> Detroit and was quite impressed. There are several very well thought
> out ideas incorporated in this jig. The one that is REALLY intriging
> is the concept it has in keeping the edge of the miter fence exactly at
> the blade cutting edge no matter what angle the jig is set for. I
> understand that this is controlled by the arc and not the connection at
> the hinge point. The presentation made a very good impression about
> how repeatable and accurate the jig is.
>
> However, I have been hearing mixed reviews from owners. Are any of you
> owners of this jig? Can you give me your impressions of how you like
> your jig.
>
> How well does the unique method of keeping the right miter edge at the
> cutting edge of the saw work over time?
>
> What is your experience with the Jointech people?
>
> The base price I find is $259. Is that the going rate everywhere?
>
I went through this decision about 6 years ago. The Jointech sled is pretty
cool however I ended up being very happy with the left and right side Dubby
jig.
For me, strikes against the Jointech were that you could not easily cut wide
panels with it. The jig is designed more for boards rather than panels. I
can cut wider panels with the Dubby.
Additionally, while I chose to buy 2 Dubby jigs, left and right both were
only slightly more expensive than the Jointech, IIRC about $269, 6 years ago
at show prices.
The reason that I bought both left and right is that I did not want to point
my wood in different directions when cutting + or - from 90 degree cuts.
Basically, with the jig on the left side of the blade and having the leading
end of the fence on the left side and trailing end on the blade side you can
make a pretty clean cut. When cutting complementary asymmetrical molding
angles you have to set the fence with the leading end of the fence on the
right side close to the blade and the trailing end of the fence on the left
side. With this set up the back side of the cut is more likely to have tear
out as the blade angle is acute vs. obtus when exiting the back side of the
wood. The more acute the exiting cutting angle the more the wood is likely
to have tear out.
With the left and right Dubby jigs you can cut miters on either side of the
blade with the trailing end of the fence always near the blade.
Last, No big deal if you want to cut compound angles or bevel cuts Tilt the
blade with out worry of cutting the sled and just use the sled on the
opposite side of the blade tilt if you buy both sleds.
The Jointech has the edge with the adjustable miter guide bar and adjustable
fence for blade clearance. I find the miter gauge bar being fixed on the
Dubby to not be a problem as I never intend to change saws. When I need the
fence to be closer to the blade I use a sacrificial fence.