I agree with the technicality.
Otherwise, the soap you buy from the store would be a puddle by the time it got on the shelf.
I've got hotel soap from vacations 10 years back still bone dry, stored in the bathroom yet.
Good demo of hygroscopic is a crystal of pure sodium hydroxide left open to atmosphere. Got to see to believe.
A good point was made that I'd never considered about soap reacting with the wood and leaching resins (as a solvent), later affecting the coating.
What others might do this? The turp in a turp/wax mix, the petroleum distallates in hand cleaner, etc.?
What about pH changes?
And how do I make sure there's no stray anything left on the wood when I'm done? All would seem to block a finish.
<big snip>
Soap may be somewhat hygroscopic, but better examples would be methanol and
ethanol. They absorb water from the air readily. Perhaps the property
you're thinking of is hydrophilic or hydrophobic. Soap molecules have a
hydrophilic (water-preferring) end and a hydrophobic (oil/fat-preferring)
end, which is why it works as it does by cleaning a variety of substances.
<[email protected]> wrote in message
news:[email protected]...
>I agree with the technicality.
> Otherwise, the soap you buy from the store would be a puddle by the time
> it got on the shelf.
> I've got hotel soap from vacations 10 years back still bone dry, stored in
> the bathroom yet.
> Good demo of hygroscopic is a crystal of pure sodium hydroxide left open
> to atmosphere. Got to see to believe.
>
> A good point was made that I'd never considered about soap reacting with
> the wood and leaching resins (as a solvent), later affecting the coating.
> What others might do this? The turp in a turp/wax mix, the petroleum
> distallates in hand cleaner, etc.?
> What about pH changes?
>
> And how do I make sure there's no stray anything left on the wood when I'm
> done? All would seem to block a finish.
>
WOOD adsorbs moisture to equalize with the surroundings. Loses it, too.
Think this may be a herring of a different color.
Non-polar solvents like turps don't like water at all, and if the soap is
neutralized, which most all are, detergents taking care of the heavy
grease, the pH can never get higher than the original wood.