We have a 35 year old dining table in maple. Probably finished in
nitrocellulose. Over the years the appearance has deteriorated (some rings,
wax build up, scratches, etc) despite the use of table top leathers. Also,
use of recommended spray polishes, containing solvents, has had a negative
effect. I am trying to improve the appearance of this surface, using areas
which don't show, as follows.
1). Remove wax build-up with water/dish washing liquid.
2). Use an automotive finish rubbing compound followed by removal with a dry
cloth.
3). Use an automotive finish polishing compound followed by removal with a
dry cloth.
Results are mixed. Scratches are much reduced. High angle appearance is
improved. Low angle appearance is much worse with a hazy gloss.
I have considered having the table top refinished professionally but I have
not been happy with the shops around here.
Does anyone have any additional ideas regarding the refurbishment of my
table?
Peter.
www.refinishwizard.com forum might be helpful.
On Wed, 26 Oct 2005 22:54:52 -0400, "PVR"
<[email protected]> wrote:
>We have a 35 year old dining table in maple. Probably finished in
>nitrocellulose. Over the years the appearance has deteriorated (some rings,
>wax build up, scratches, etc) despite the use of table top leathers. Also,
>use of recommended spray polishes, containing solvents, has had a negative
>effect. I am trying to improve the appearance of this surface, using areas
>which don't show, as follows.
>
>1). Remove wax build-up with water/dish washing liquid.
>
>2). Use an automotive finish rubbing compound followed by removal with a dry
>cloth.
>
>3). Use an automotive finish polishing compound followed by removal with a
>dry cloth.
>
>Results are mixed. Scratches are much reduced. High angle appearance is
>improved. Low angle appearance is much worse with a hazy gloss.
>
>I have considered having the table top refinished professionally but I have
>not been happy with the shops around here.
>
>Does anyone have any additional ideas regarding the refurbishment of my
>table?
>
>Peter.
>
>
>
I've had good luck in restoring finishes with "Liquid Gold". Seems to
reduce the visibility of problems and gives a nice overall glow to the work.
Has to be renewed every few years, but not to hard to do.
I don't know if it contains silicon compounds or not.
Walt C
"PVR" <[email protected]> wrote in message
news:[email protected]...
> We have a 35 year old dining table in maple. Probably finished in
> nitrocellulose. Over the years the appearance has deteriorated (some
> rings,
> wax build up, scratches, etc) despite the use of table top leathers. Also,
> use of recommended spray polishes, containing solvents, has had a negative
> effect. I am trying to improve the appearance of this surface, using areas
> which don't show, as follows.
>
> 1). Remove wax build-up with water/dish washing liquid.
>
> 2). Use an automotive finish rubbing compound followed by removal with a
> dry
> cloth.
>
> 3). Use an automotive finish polishing compound followed by removal with a
> dry cloth.
>
> Results are mixed. Scratches are much reduced. High angle appearance is
> improved. Low angle appearance is much worse with a hazy gloss.
>
> I have considered having the table top refinished professionally but I
> have
> not been happy with the shops around here.
>
> Does anyone have any additional ideas regarding the refurbishment of my
> table?
>
> Peter.
>
>
>
>