Right now I'm in the stage of researching the components for a dust
collection system for my small shop. I think I've decided on the Penn
State DC-2 1 1/2 HP collector with 1 micron bags which is on sale
right now for $249 plus $44 shipping. I'm going to add a garbage can
cyclone unit. The DC will be used with only one tool running at a
time. I've got separate 20 Amp circuits for my tools-table saw,
thickness planer, miter saw, jointer, etc. and a dedicated 15 amp
circuit for my DC. I was hoping to have a 20 amp dedicated for the DC
but because of some existing 14 AWG wire that would be very difficult
to upgrade I'm stuck with 15. I have two questions for you
electrically adept people. Question 1- The Penn State catalog lists
the "capacity" of the DC-2 at 17 amps but then says that running
amperage will be significantly less. Am I going to have problems with
breakers tripping by running this on my 15 amp circuit? Question 2-
I'm looking at running the DC on some kind of remote and Home Depot in
my area has a Heath/Zenith Indoor/Outdoor remote light control, model
#SL-6139-C that is listed for 13 amp resistive according to the
package. Will this unit be able to handle the DC-2 or is this a
hazardous situation? Thanks for any help you can provide.
Dale
I'd be concerned about the life time of the Heath/Zenith unit switching
an inductive load like the motor. I believe that they make other units
rated for switch inductive loads though. Resistive loads are less
taxing on the switch since they don't have the same tendency to arc.
Phil
Edwin Pawlowski wrote:
> "Dale" <[email protected]> wrote in message
>
>
>>to upgrade I'm stuck with 15. I have two questions for you
>>electrically adept people. Question 1- The Penn State catalog lists
>>the "capacity" of the DC-2 at 17 amps but then says that running
>>amperage will be significantly less. Am I going to have problems with
>>breakers tripping by running this on my 15 amp circuit?
>
>
> Mine is on a 15A, never a problem.
>
>
> Question 2-
>
>>I'm looking at running the DC on some kind of remote and Home Depot in
>>my area has a Heath/Zenith Indoor/Outdoor remote light control, model
>>#SL-6139-C that is listed for 13 amp resistive according to the
>>package. Will this unit be able to handle the DC-2 or is this a
>>hazardous situation? Thanks for any help you can provide.
>
>
> I have no idea, but it was designed for lighting, may not handle a motor
> load well. . I do have the Long Ranger and it works just fine. Very handy
> to have. It was about $50
> Ed
> [email protected]
> http://pages.cthome.net/edhome
>
>
>
> I'm looking at running the DC on some kind of remote and Home Depot in
> my area has a Heath/Zenith Indoor/Outdoor remote light control, model
> #SL-6139-C that is listed for 13 amp resistive according to the
> package. Will this unit be able to handle the DC-2 or is this a
> hazardous situation? Thanks for any help you can provide.
>
> Dale
My DC, a home built cyclone unit is on a 15 amp circuit but draws I think 11
amp. I have been using the Heath/Zenith Indoor/Outdoor remote for the past
two months, works great and for only $12.
MGH
Go to ebay and search for a NEMA size 0 or bigger contactor, two or
three phase contactors will work just fine. ($20 absolute max even if
you don't know how to find a bargain on ebay)
Since you are running on 110v make sure to get a contactor with a 110v
coil. Wire a plug onto the coil of the contactor and plug it into the
Heath/Zenith remote. Wire another plug onto two of the poles on the
contactor and a recepticle onto the other side of the two poles on the
contactor.
The remote will be able to handle any load you throw at it, Dust
collector, fan, stereo, heater all put together (14g wire won't
though).
ie. a contactor is just a fancy name for a relay made to handle large
amounts of current.
On 11 Aug 2003 20:49:19 -0700, [email protected] (Dale)
wrote:
>Right now I'm in the stage of researching the components for a dust
>collection system for my small shop. I think I've decided on the Penn
>State DC-2 1 1/2 HP collector with 1 micron bags which is on sale
>right now for $249 plus $44 shipping. I'm going to add a garbage can
>cyclone unit. The DC will be used with only one tool running at a
>time. I've got separate 20 Amp circuits for my tools-table saw,
>thickness planer, miter saw, jointer, etc. and a dedicated 15 amp
>circuit for my DC. I was hoping to have a 20 amp dedicated for the DC
>but because of some existing 14 AWG wire that would be very difficult
>to upgrade I'm stuck with 15. I have two questions for you
>electrically adept people. Question 1- The Penn State catalog lists
>the "capacity" of the DC-2 at 17 amps but then says that running
>amperage will be significantly less. Am I going to have problems with
>breakers tripping by running this on my 15 amp circuit? Question 2-
>I'm looking at running the DC on some kind of remote and Home Depot in
>my area has a Heath/Zenith Indoor/Outdoor remote light control, model
>#SL-6139-C that is listed for 13 amp resistive according to the
>package. Will this unit be able to handle the DC-2 or is this a
>hazardous situation? Thanks for any help you can provide.
>
>Dale
On Tue, 12 Aug 2003 23:50:49 GMT, Bob G <[email protected]> wrote:
> I also took two 3 way switches and and placed them along the center of
>my 24 x 24 foot shop and 6 foot out from the walls on both ends Since
>I have a low ceiling I can reach up and use either ..and I am never more
>then 2 steps away from the switches no matter where I stand in the
It sounds like we had a little synchronicity going on when we wired
our dust collectors. <G>
Mine is exactly the same setup, as I'm in a basement. The switches
are on the center beam of the house.
Barry
"Dale" <[email protected]> wrote in message
> to upgrade I'm stuck with 15. I have two questions for you
> electrically adept people. Question 1- The Penn State catalog lists
> the "capacity" of the DC-2 at 17 amps but then says that running
> amperage will be significantly less. Am I going to have problems with
> breakers tripping by running this on my 15 amp circuit?
Mine is on a 15A, never a problem.
Question 2-
> I'm looking at running the DC on some kind of remote and Home Depot in
> my area has a Heath/Zenith Indoor/Outdoor remote light control, model
> #SL-6139-C that is listed for 13 amp resistive according to the
> package. Will this unit be able to handle the DC-2 or is this a
> hazardous situation? Thanks for any help you can provide.
I have no idea, but it was designed for lighting, may not handle a motor
load well. . I do have the Long Ranger and it works just fine. Very handy
to have. It was about $50
Ed
[email protected]
http://pages.cthome.net/edhome
> I have no idea, but it was designed for lighting, may not handle a motor
> load well. . I do have the Long Ranger and it works just fine. Very
handy
> to have. It was about $50
> Ed
>
My Dust collector runs fine on my 15amp garage circuit. I also use the
Long Ranger remote for controlling it. Works great and am very pleased with
it.
Dale wrote:
> I'm looking at running the DC on some kind of remote and Home Depot in
> my area has a Heath/Zenith Indoor/Outdoor remote light control, model
> #SL-6139-C that is listed for 13 amp resistive according to the
> package. Will this unit be able to handle the DC-2 or is this a
> hazardous situation? Thanks for any help you can provide.
The Ace Hardware in my area has a remote unit that is rated for
1 1/2hp motors...for $25, IIRC.
--
************************************
Chris Merrill
[email protected]
(remove the ZZZ to contact me)
************************************