Hi Guys!
Well it is finally time to close up the shop and move north.
Today I am in the process of cutting up all of the offcuts and scantlings
that I saved for the next project. Most are to small to be of any use in a
project, but I do have a few timbers that can be of use.
8/4 FAS Red Oak up to 8 feet long both in the rough and S4S
Hard maple flat sawn in the rough and S4S
You can have it all FREE just for coming by the shop and hauling it home.
--
Best of luck in your endeavors,
Gerald Masgai
Reply to: gmasgai AT pacbell DOT net
Notes from My Shop: http://www.geocities.com/PicketFence/5276/shop
Read the Woodworking FAQ: http://www.robson.org/woodfaq/
Gerald Masgai says:
>Hi Guys!
>
>Well it is finally time to close up the shop and move north.
>
>Today I am in the process of cutting up all of the offcuts and scantlings
>that I saved for the next project. Most are to small to be of any use in a
>project, but I do have a few timbers that can be of use.
>
>8/4 FAS Red Oak up to 8 feet long both in the rough and S4S
>Hard maple flat sawn in the rough and S4S
>
>You can have it all FREE just for coming by the shop and hauling it home.
>
Move north? Dave Fleming was just asking where you got to, and none of us
knew...good to see you're still around.
Charlie Self
"If a politician found he had cannibals among his constituents, he would
promise them missionaries for dinner." H. L. Mencken
> Gerald Masgai
Who is this guy?
(TIC)
Thanks,
David.
Every neighbourhood has one, in mine, I'm him.
Remove the "splinter" from my email address to email me.
Newbies, please read this newsgroups FAQ.
rec.ww FAQ http://www.robson.org/woodfaq/
Archives http://groups.google.com/advanced_group_search
Crowbar FAQ http://www.klownhammer.org/crowbar
How do I get there? I am in Laguna Hills
Kevin
--
---------------------------------------------------------------------
"Are you still wasting your time with spam?...
There is a solution!"
Protected by GIANT Company's Spam Inspector
The most powerful anti-spam software available.
http://www.giantcompany.com
"Gerald Masgai" <[email protected]> wrote in message
news:[email protected]...
> Hi Guys!
>
> Well it is finally time to close up the shop and move north.
>
> Today I am in the process of cutting up all of the offcuts and scantlings
> that I saved for the next project. Most are to small to be of any use in
a
> project, but I do have a few timbers that can be of use.
>
> 8/4 FAS Red Oak up to 8 feet long both in the rough and S4S
> Hard maple flat sawn in the rough and S4S
>
> You can have it all FREE just for coming by the shop and hauling it home.
>
> --
> Best of luck in your endeavors,
>
> Gerald Masgai
> Reply to: gmasgai AT pacbell DOT net
> Notes from My Shop: http://www.geocities.com/PicketFence/5276/shop
> Read the Woodworking FAQ: http://www.robson.org/woodfaq/
>
>
>
>
>
>
>
"Gerald Masgai" <[email protected]> wrote in message news:[email protected]...
| Hi Guys!
|
| Well it is finally time to close up the shop and move north.
|
| Today I am in the process of cutting up all of the offcuts and scantlings
| that I saved for the next project. Most are to small to be of any use in a
| project, but I do have a few timbers that can be of use.
|
| 8/4 FAS Red Oak up to 8 feet long both in the rough and S4S
| Hard maple flat sawn in the rough and S4S
|
| You can have it all FREE just for coming by the shop and hauling it home.
|
| --
| Best of luck in your endeavors,
|
| Gerald Masgai
| Reply to: gmasgai AT pacbell DOT net
| Notes from My Shop: http://www.geocities.com/PicketFence/5276/shop
| Read the Woodworking FAQ: http://www.robson.org/woodfaq/
|
A gentleman, craftsman and generous fellow woodworker. I'll make great use of those boards, Jerry.
Best wishes in your beautiful new home.
David
> How do I get there? I am in Laguna Hills
> Kevin
>
Sorry Kevin, the Prosecutor stopped by the shop on Tuesday afternoon and
drove away with all of it.
--
Best of luck in your endeavors,
Gerald Masgai
Reply to: gmasgai AT pacbell DOT net
Notes from My Shop: http://www.geocities.com/PicketFence/5276/shop
Read the Woodworking FAQ: http://www.robson.org/woodfaq/