I live in an area of the UK where unless you are unemployed it's
impossible to join a college course in woodwork. So I thought if I
can't get on a course, I'll try and learn it from a book. So, to my
point, does anyone have a good book that outlines the basics of
woodworking, from tool selection and use through jointing and
finishing? I have tried my local bookshop but they are very limited in
selection and the magazines assume prior knowledge or at least a
certain level of competency in the subject.
Bear in mind that I have never studied woodworking so this will be a
first for me.
Kevin.
What upscale said.
If I remember correctly, you have the New Yankee Workshop on in the UK.
You should definitly start watching that as well as any other shows
you may have. Quite a lot of us over here got started by watching that
show. After a dozen episodes or so, I bet you'll be able to make some
small stuff.
brian
[email protected] wrote:
> I have tried my local bookshop but they are very limited in
> selection and the magazines assume prior knowledge or at least a
> certain level of competency in the subject.
>
> Bear in mind that I have never studied woodworking so this will be a
> first for me.
Setting Up Shop by Aimee Fraser
JP
<[email protected]> wrote in message
news:[email protected]...
>I live in an area of the UK where unless you are unemployed it's
> impossible to join a college course in woodwork. So I thought if I
> can't get on a course, I'll try and learn it from a book. So, to my
> point, does anyone have a good book that outlines the basics of
> woodworking, from tool selection and use through jointing and
> finishing? I have tried my local bookshop but they are very limited in
> selection and the magazines assume prior knowledge or at least a
> certain level of competency in the subject.
>
I don't know if it's a beginner book or now, but Tage Frid's first book on
is to the point and he shows more than one way to make different joints,
using handtools and powertools. I think they are publishing 2 or 3 volumes
in 1 book now, but you should still be able to find book 1 by itself through
the usual used booksellers; Amazon, Powells, etc.
After checking amazon.co.uk, they do have 5 from £12.50. Search for "Tage
Frid Teaches Woodworking: Joinery - Tools and Techniques Bk. 1"
Cheers!
Dukester
Here are some books I've learned a lot from:
Cliffe, Roger W. Table Saw Techniques.
Guidice, Anthony. The Seven Essentials of Woodworking.
Feirer, John L. Cabinetmaking and Millwork.
Spielman, Patrick. The New Router Handbook.
Schiff, David and Burton, Kenneth S. The Woodworker's Guide to Making and
Using Jigs, Fixtures and Setups
These are very high quality books. No single book has it all. The books by
Guidice and Feirer are the most basic and general in this list. Keep
looking until you find books that are just right for your level. They're
out there.
<[email protected]> wrote in message
news:[email protected]...
>I live in an area of the UK where unless you are unemployed it's
> impossible to join a college course in woodwork. So I thought if I
> can't get on a course, I'll try and learn it from a book. So, to my
> point, does anyone have a good book that outlines the basics of
> woodworking, from tool selection and use through jointing and
> finishing? I have tried my local bookshop but they are very limited in
> selection and the magazines assume prior knowledge or at least a
> certain level of competency in the subject.
>
> Bear in mind that I have never studied woodworking so this will be a
> first for me.
>
> Kevin.
>
[email protected] wrote:
> I live in an area of the UK where unless you are unemployed it's
> impossible to join a college course in woodwork. So I thought if I
> can't get on a course, I'll try and learn it from a book. So, to my
> point, does anyone have a good book that outlines the basics of
> woodworking, from tool selection and use through jointing and
> finishing? I have tried my local bookshop but they are very limited in
> selection and the magazines assume prior knowledge or at least a
> certain level of competency in the subject.
>
> Bear in mind that I have never studied woodworking so this will be a
> first for me.
>
> Kevin.
>
Take a look at this on Amazon:
Woodworking Basics: Mastering the Essentials of Craftsmanship
Read the reviews and look at the Table of Contents. Excellent book!
On 24 Mar 2006 07:12:17 -0800, [email protected] wrote:
>I live in an area of the UK where unless you are unemployed it's
>impossible to join a college course in woodwork. So I thought if I
>can't get on a course, I'll try and learn it from a book. So, to my
>point, does anyone have a good book that outlines the basics of
>woodworking, from tool selection and use through jointing and
>finishing? I have tried my local bookshop but they are very limited in
>selection and the magazines assume prior knowledge or at least a
>certain level of competency in the subject.
>
>Bear in mind that I have never studied woodworking so this will be a
>first for me.
Library.
--------------------
Steve Jensen
Abbotsford B.C.
[email protected] chopping out the mortise.
BBS'ing since 1982 at 300 bps.
Surfing along at 19200 bps since 95.
WW'ing since 1985
LV Cust #4114
Nothing catchy to say, well maybe.....
WAKE UP - There are no GODs you fools!
<[email protected]> wrote in message
> can't get on a course, I'll try and learn it from a book. So, to my
> point, does anyone have a good book that outlines the basics of
You're not going to find a single book to give you all the information you'd
need. Most professional woodworkers got into the trade by building stuff for
themselves and then branching out. I'd suggest you start off similarly, take
a few hand tools and build something small for yourself. Find stuff you want
to build and look up information on how to build those specific items. After
you gain a measure of skill, you'll be much more knowledgeable in buying
better quality tools and have a better idea of what kinds of tools you do
need.
If there's no affordable woodworking courses in your area, then find a
woodworking club or even get a few of your buddies together who do
woodworking. You'll learn lots that way and find out what kinds of tools
those people have and use. That would be my best suggestion.
On 24 Mar 2006 07:12:17 -0800, [email protected] wrote:
>I live in an area of the UK where unless you are unemployed it's
>impossible to join a college course in woodwork. So I thought if I
>can't get on a course, I'll try and learn it from a book. So, to my
>point, does anyone have a good book that outlines the basics of
>woodworking, from tool selection and use through jointing and
>finishing?
Tage Frid Teaches Woodworking is about the best _first_ book I can
recommend.
Don't let the black and white photos of the funny looking old guy turn
you off. There's LOTS of great info in it and zero hype.
Barry