On Thu, 11 Oct 2012 04:02:46 -0400, "Rob H." <[email protected]>
wrote:
>I need some help on the last one in this set:
>
>http://55tools.blogspot.com/
>
>
>Rob
It is where you put your golf club bag
"Stormin Mormon" <cayoung61***[email protected]> writes:
> That's a pretty high class car. Way to go!
My Saab had a hatch from the boot to between the back seats. The manual
said it was for golf clubs, but I tended to use it for things like
lengths of copper pipe.
"Stormin Mormon" <cayoung61***[email protected]> writes:
> Metal working tradesman, perhaps?
No, just a bit of DIY.
>
> I'm not sure what would be my use of such a hatch.
>
> Christopher A. Young Learn more about Jesus www.lds.org .
>
> "Dr Nick" <[email protected]> wrote in message
> news:[email protected]... "Stormin Mormon"
> <cayoung61***[email protected]> writes:
>
>> That's a pretty high class car. Way to go!
>
> My Saab had a hatch from the boot to between the back seats. The
> manual said it was for golf clubs, but I tended to use it for things
> like lengths of copper pipe.
In article <[email protected]>, [email protected] says...
>
> "willshak" <[email protected]> wrote in message
> news:[email protected]...
> > Rob H. wrote the following on 10/11/2012 4:02 AM (ET):
> >> I need some help on the last one in this set:
> >>
> >> http://55tools.blogspot.com/
> >>
> >>
> >> Rob
> >
> > 2683 to carry golf clubs.
>
>
> Yes, this car was on display at a museum and they said the door was for golf
> clubs.
The fact that an iron is visible in the enlarged photo gave it a way.
"Rob H." wrote in message news:[email protected]...
I need some help on the last one in this set:
http://55tools.blogspot.com/
Rob
The car>>>My uncle had one similar. Rumble seat and that small side door. In
1932 he would take me and his son rabbit hunting in Colorado. Could slide
the rifles in that small door between looking for fields to hunt on. The son
left a round in the chamber and when we hit a deep dip in the road the gun
fired and put a hole in the little door. Lesson learned>. never leave a
round ready to fire in the chamber. WW
"Rob H." <[email protected]> wrote in message
news:[email protected]...
>
> "willshak" <[email protected]> wrote in message
> news:[email protected]...
>> Rob H. wrote the following on 10/11/2012 4:02 AM (ET):
>>> I need some help on the last one in this set:
>>>
>>> http://55tools.blogspot.com/
>>>
>>>
>>> Rob
>>
>> 2683 to carry golf clubs.
>
>
> Yes, this car was on display at a museum and they said the door was for
> golf clubs.
>
This reminds me of an old, old story (apologies if you've seen it before).
An elderly gentleman pulls into a petrol (gas) station in his Rolls-Royce.
As he gets out of the car a golf tee falls from his pocket.
The pump attendant says 'excuse me sir, you just dropped this. May I ask
what it is for?'
The elderly gentleman thanks him and says 'That's for resting your balls on
when driving'.
Attendant ' Good Lord, Rolls-Royce think of everything'.
I'll get my hat and coat.
Nick.
2683 I guess this car has a pet door and the trunk is used as a pet
(dog) travel compartment.
I apologize if this post is a duplicate... I got an error message when
trying to post a half-hour ago.
On 10/11/2012 4:02 AM, Rob H. wrote:
> I need some help on the last one in this set:
>
> http://55tools.blogspot.com/
>
>
> Rob
"Walter Kraft" <[email protected]> wrote in message
news:[email protected]...
> Hello All,
>
> The last one ( 2688 ) seems to be a device to keep angles steady when
> sharpening a drill bit on a grinding wheel
Agreed. The 59 degree marking makes this pretty definite as that is the most
common grinding angle for twist drills for drilling steel (118 degrees
included angle) although wider and narrower angles are used for some
materials and the other marked angles would cover these.
There should probably be a top clamp for the drill bit to stop it moving but
this seems to be missing.
--
Dave Baker
"Walter Kraft" <[email protected]> wrote in message
news:[email protected]...
> Hello All,
>
> The last one ( 2688 ) seems to be a device to keep angles steady when
> sharpening a drill bit on a grinding wheel
>
> Ist the Door at 2683 for quick access to a weapon?
Thanks, I have confirmed that drill bit jig is correct. The door in the car
is not for weapon.
"willshak" <[email protected]> wrote in message
news:[email protected]...
> Rob H. wrote the following on 10/11/2012 4:02 AM (ET):
>> I need some help on the last one in this set:
>>
>> http://55tools.blogspot.com/
>>
>>
>> Rob
>
> 2683 to carry golf clubs.
Yes, this car was on display at a museum and they said the door was for golf
clubs.
<[email protected]> wrote in message
news:62f15ca9-b285-4b5c-930e-b790daf07745@b15g2000yqk.googlegroups.com...
>
>> http://55tools.blogspot.com/
>
> Wild Guess ...
>
> 2687 - Upholsterer's webbing stretcher
It's not for stretching upholstery but is used in a similar fashion.
On 10/11/12 4:02 AM, Rob H. wrote:
> I need some help on the last one in this set:
>
> http://55tools.blogspot.com/
>
>
> Rob
2686: A pair of these handles could be used to hang a open burlap sack
of feed. If you leave the sack on the floor, rodents can get it, the
limp sack will probably spill feed, and you have to bend over to scoop
feed. If you dump it in a can, you may spill feed and you may breathe a
lot of dust.
You'd clamp one of these to each side of a burlap sack near the top.
Then you'd hang them with the ears on horizontal bars about 12" apart.
The bottom of the sack should be at least 12" off the floor. Then open
the sack. If the handles are 12" apart along the bars, the opening will
be 8 x 12".
>> >> http://55tools.blogspot.com/
>> >>
>> >>
>> >> Rob
>> >
>> > 2683 to carry golf clubs.
>>
>>
>> Yes, this car was on display at a museum and they said the door was for
>> golf
>> clubs.
>
> The fact that an iron is visible in the enlarged photo gave it a way.
I didn't even notice that iron, I had shopped out a really obvious wooden
club but didn't look close enough to see the iron in the background. Here is
the original before I shopped out the wood:
http://img.photobucket.com/albums/v80/harnett65/Album%2015/DSC025262.jpg
"tnik" <[email protected]> wrote in message
news:[email protected]...
> On 10/11/2012 4:02 AM, Rob H. wrote:
>> I need some help on the last one in this set:
>>
>> http://55tools.blogspot.com/
>>
>>
>> Rob
>
> I'm going to guess 2687 is for stretching leather or fabric for upholstery
> work?
Your first guess is correct, it's for particular form of leather work.
"J Burns" <[email protected]> wrote in message
news:[email protected]...
> On 10/11/12 4:02 AM, Rob H. wrote:
>> I need some help on the last one in this set:
>>
>> http://55tools.blogspot.com/
>>
>>
>> Rob
> 2686: A pair of these handles could be used to hang a open burlap sack of
> feed. If you leave the sack on the floor, rodents can get it, the limp
> sack will probably spill feed, and you have to bend over to scoop feed.
> If you dump it in a can, you may spill feed and you may breathe a lot of
> dust.
>
> You'd clamp one of these to each side of a burlap sack near the top. Then
> you'd hang them with the ears on horizontal bars about 12" apart. The
> bottom of the sack should be at least 12" off the floor. Then open the
> sack. If the handles are 12" apart along the bars, the opening will be 8
> x 12".
Sounds like that would work but according to the patent it's not for holding
burlap sacks.
>> http://55tools.blogspot.com/
>>
>>
>> Rob
> 2686: A pair of these handles could be used to hang a open burlap sack
> of feed. If you leave the sack on the floor, rodents can get it, the
> limp sack will probably spill feed, and you have to bend over to scoop
> feed. If you dump it in a can, you may spill feed and you may breathe a
> lot of dust.
>
> You'd clamp one of these to each side of a burlap sack near the top.
> Then you'd hang them with the ears on horizontal bars about 12" apart.
> The bottom of the sack should be at least 12" off the floor. Then open
> the sack. If the handles are 12" apart along the bars, the opening will
> be 8 x 12".
I should have mentioned that this item is part of a countertop machine.
On 10/12/12 4:03 AM, Rob H. wrote:
>
>>> http://55tools.blogspot.com/
>>>
>>>
>>> Rob
>> 2686: A pair of these handles could be used to hang a open burlap sack
>> of feed. If you leave the sack on the floor, rodents can get it, the
>> limp sack will probably spill feed, and you have to bend over to scoop
>> feed. If you dump it in a can, you may spill feed and you may breathe
>> a lot of dust.
>>
>> You'd clamp one of these to each side of a burlap sack near the top.
>> Then you'd hang them with the ears on horizontal bars about 12" apart.
>> The bottom of the sack should be at least 12" off the floor. Then open
>> the sack. If the handles are 12" apart along the bars, the opening
>> will be 8 x 12".
>
>
> I should have mentioned that this item is part of a countertop machine.
>
The spacing looks right for 5/8" mesh. How about food processing, in a
kitchen or a plant?
Perhaps produce arrives in mesh bags, or perhaps it's put in bags for
washing. Then, I imagine each piece should be inspected before being
fed to a processing machine such as a potato peeler.
The assistant clamps a mesh bag of produce with this handle and hangs it
from the counter. The bag is at a convenient height and hangs with its
mouth open so it's quick and easy for the machine operator to grab
pieces one by one and feed them to the machine.
>> I should have mentioned that this item is part of a countertop machine.
>>
> The spacing looks right for 5/8" mesh. How about food processing, in a
> kitchen or a plant?
>
> Perhaps produce arrives in mesh bags, or perhaps it's put in bags for
> washing. Then, I imagine each piece should be inspected before being fed
> to a processing machine such as a potato peeler.
>
> The assistant clamps a mesh bag of produce with this handle and hangs it
> from the counter. The bag is at a convenient height and hangs with its
> mouth open so it's quick and easy for the machine operator to grab pieces
> one by one and feed them to the machine.
It's not for mesh bags but you are correct about it being for food
processing. Thanks to everyone who identified the drill bit holder, the
answers for this set have been posted here:
http://55tools.blogspot.com/2012/10/set-462.html#answers
Rob
You know, that's droll. Jolly good, chap.
Christopher A. Young
Learn more about Jesus
www.lds.org
.
"Nick" <[email protected]> wrote in message
news:[email protected]...
This reminds me of an old, old story (apologies if you've seen it before).
An elderly gentleman pulls into a petrol (gas) station in his Rolls-Royce.
As he gets out of the car a golf tee falls from his pocket.
The pump attendant says 'excuse me sir, you just dropped this. May I ask
what it is for?'
The elderly gentleman thanks him and says 'That's for resting your balls on
when driving'.
Attendant ' Good Lord, Rolls-Royce think of everything'.
I'll get my hat and coat.
Nick.
Don't you have a servant, to walk for help?
Christopher A. Young
Learn more about Jesus
www.lds.org
.
"Michael A. Terrell" <[email protected]> wrote in message
news:[email protected]...
Nick wrote:
>
> Attendant ' Good Lord, Rolls-Royce think of everything'.
Except how to keep them from boiling over, and leaving them sitting
on the side of the Interstate.
Metal working tradesman, perhaps?
I'm not sure what would be my use of such a hatch.
Christopher A. Young
Learn more about Jesus
www.lds.org
.
"Dr Nick" <[email protected]> wrote in message
news:[email protected]...
"Stormin Mormon" <cayoung61***[email protected]> writes:
> That's a pretty high class car. Way to go!
My Saab had a hatch from the boot to between the back seats. The manual
said it was for golf clubs, but I tended to use it for things like
lengths of copper pipe.
On 2012-10-11, Rob H. <[email protected]> wrote:
> I need some help on the last one in this set:
>
> http://55tools.blogspot.com/
I see that you got that one answered -- before I could get my
newsreader to work. I couldn't access the newsgroup yesterday or for
quite a while today. Something wrong with the killfile/scorefile.
Enjoy,
DoN.
--
Remove oil spill source from e-mail
Email: <[email protected]> | Voice (all times): (703) 938-4564
(too) near Washington D.C. | http://www.d-and-d.com/dnichols/DoN.html
--- Black Holes are where God is dividing by zero ---
2683, on a car this age, the door is for selling moonshine.
2684 Elks club ashtray.
2685, totally no clue
2686, just guessing. This is for displaying quilts, the pointy
things grab the fabric, and the handle allows hanging it up.
2687, a carpet stretcher
2688, someone else wrote it was a drill bit sharpener holder.
I think this correct. Not the fireworks launcher, that I
was going to write.
Christopher A. Young
Learn more about Jesus
www.lds.org
.
"Rob H." <[email protected]> wrote in message
news:[email protected]...
I need some help on the last one in this set:
http://55tools.blogspot.com/
Rob
That's a pretty high class car. Way to go!
Christopher A. Young
Learn more about Jesus
www.lds.org
.
"Rob H." <[email protected]> wrote in message
news:[email protected]...
>> http://55tools.blogspot.com/
>
> 2683 to carry golf clubs.
Yes, this car was on display at a museum and they said the door was for golf
clubs.