Adam Diehl wrote:
> Must be different than the step drills I'm used to. The one's I've used
> have steps that are much too shallow (maybe 1/8" - 3/16" per step) to be
> of any use for pre-drilling screw holes. I just use a combination drill
> bit/countersink for that sort of thing. Anyone have a link to a step
> drill specifically for wood screws?
>
> -AD
Drill bit like those supplied with the Kreg pocket hole jig are also referred to as
step drill bits.
--
Jack Novak
Buffalo, NY - USA
(Remove "SPAM" from email address to reply)
> Countersinking wood screws is the first thing that spring to mind. One
> diameter for the threaded portion of the screw, one for the unthreaded shank,
> and one for the head.
Must be different than the step drills I'm used to. The one's I've used
have steps that are much too shallow (maybe 1/8" - 3/16" per step) to be
of any use for pre-drilling screw holes. I just use a combination drill
bit/countersink for that sort of thing. Anyone have a link to a step
drill specifically for wood screws?
-AD
Mike Pio wrote:
> My wife bought me an early x-mas gift -- a set of 3 step drill bits. The
> problem is, I'm really not sure why I'd need them. I guess I don't fully
> understand their benefits. Can you fill me in??
Step drills are good for drilling sheet metal, tubing, etc. where you
need to go through successively larger drill bit sizes to get a hole of
a given size. Basically it saves you from having to change the drill bit
half a dozen times to get one hole drilled. As for wood working, I'm
not sure what you'd use it for.
-AD
In article <WJpvd.2696$Sq.1751@fed1read01>,
Mike Pio <[email protected]> wrote:
>My wife bought me an early x-mas gift -- a set of 3 step drill bits. The
>problem is, I'm really not sure why I'd need them. I guess I don't fully
>understand their benefits. Can you fill me in??
>
>TIA
>
>-m
>
>
They're handy for sheet metal work or other thin stock. I can't see
much use for them in woodworking though.
--
Larry Wasserman Baltimore, Maryland
[email protected]
"Mike Pio" <[email protected]> wrote in
news:WJpvd.2696$Sq.1751@fed1read01:
> My wife bought me an early x-mas gift -- a set of 3 step drill bits.
> The problem is, I'm really not sure why I'd need them. I guess I
> don't fully understand their benefits. Can you fill me in??
I have some Unibits, and they are wonderful for drilling holes in sheet
metal. You can incrementally work up to the hole size you want, and they
create a perfectly circular hole -- multi-flute bits create almost an oval
hole.
No idea where they would be good for wood.
In article <[email protected]>,
Adam Diehl <[email protected]> wrote:
>
>> Countersinking wood screws is the first thing that spring to mind. One
>> diameter for the threaded portion of the screw, one for the unthreaded shank,
>> and one for the head.
>
>Must be different than the step drills I'm used to. The one's I've used
>have steps that are much too shallow (maybe 1/8" - 3/16" per step) to be
>of any use for pre-drilling screw holes. I just use a combination drill
>bit/countersink for that sort of thing. Anyone have a link to a step
>drill specifically for wood screws?
>
>-AD
Yeah, I thought the OP meant a Unibit-style step drill, but maybe he
did mean a wood screw combo bit, or maybe even a step drill for making
pocket holes?
--
Larry Wasserman Baltimore, Maryland
[email protected]
On 12/13/2004 3:38 PM Mike Pio wrote:
> My wife bought me an early x-mas gift -- a set of 3 step drill bits. The
> problem is, I'm really not sure why I'd need them. I guess I don't fully
> understand their benefits. Can you fill me in??
>
If you're tired of twist drills grabbing thin sheet metal bits out of
your hand, then you'll want to use a step drill. Cut nice round holes
through thin metal like a hot skewer going through butter brickle ice cream.
Mmmmm. Butter brickle ice cream.
--
Mike "Rocket J Squirrel" Elliott
71 Type 2: the Wonderbus
84 Westphalia: "Mellow Yellow (The Electrical Banana)"
KG6RCR
If you are ever going to build steps you need them.
-j
"Mike Pio" <[email protected]> wrote in message
news:WJpvd.2696$Sq.1751@fed1read01...
> My wife bought me an early x-mas gift -- a set of 3 step drill bits. The
> problem is, I'm really not sure why I'd need them. I guess I don't fully
> understand their benefits. Can you fill me in??
>
> TIA
>
> -m
>
>
On Mon, 13 Dec 2004 16:38:52 -0700, "Mike Pio" <[email protected]>
wrote:
>My wife bought me an early x-mas gift -- a set of 3 step drill bits. The
>problem is, I'm really not sure why I'd need them. I guess I don't fully
>understand their benefits. Can you fill me in??
>
>TIA
>
>-m
>
I don't have any step drill bits, but I'd consider a set a nice gift.
These speed up the process of drilling a tap hole, another size for
the screw shank, and a countersink all with a single drilling. For
projects that need lots of screws, all the better.
No gimmick. They work great.
"LRod" <[email protected]> wrote in message
news:[email protected]...
> On Mon, 13 Dec 2004 16:38:52 -0700, "Mike Pio" <[email protected]>
> wrote:
>
> >My wife bought me an early x-mas gift -- a set of 3 step drill bits. The
> >problem is, I'm really not sure why I'd need them. I guess I don't fully
> >understand their benefits. Can you fill me in??
>
> I always thought of them as gimmicky. Then the one time I halfway had
> a use for one I priced it out and found out they're not in the gimmick
> aisle. I did a workaround.
>
> The Teutels on American Chopper (Brawl in the Family) use them a lot,
> so they must not be as gimmicky as I thought.
>
> - -
> LRod
>
> Master Woodbutcher and seasoned termite
>
> Shamelessly whoring my website since 1999
>
> http://www.woodbutcher.net
>Step drills are good for drilling sheet metal, tubing, etc. where you
>need to go through successively larger drill bit sizes to get a hole of
>a given size. Basically it saves you from having to change the drill bit
> half a dozen times to get one hole drilled. As for wood working, I'm
>not sure what you'd use it for.
>
>-AD
======================
I bet you can not find a HVAC installer who does not have a step bit
in his tool "Bucket"... My son gave me one when I was doing the
sheet metal work for my shop... worked like a charm...
Never even though of using it to drill holes in wood
Bob Griffiths
On Mon, 13 Dec 2004 16:38:52 -0700, "Mike Pio" <[email protected]>
wrote:
>My wife bought me an early x-mas gift -- a set of 3 step drill bits. The
>problem is, I'm really not sure why I'd need them. I guess I don't fully
>understand their benefits. Can you fill me in??
I always thought of them as gimmicky. Then the one time I halfway had
a use for one I priced it out and found out they're not in the gimmick
aisle. I did a workaround.
The Teutels on American Chopper (Brawl in the Family) use them a lot,
so they must not be as gimmicky as I thought.
- -
LRod
Master Woodbutcher and seasoned termite
Shamelessly whoring my website since 1999
http://www.woodbutcher.net
For one think - wood screws.
_______
| |
\ /
\ /
| | < Shank
| |
| |
| | < Tapered Threads
| |
\ /
\/
Bob S.
"Mike Pio" <[email protected]> wrote in message
news:WJpvd.2696$Sq.1751@fed1read01...
> My wife bought me an early x-mas gift -- a set of 3 step drill bits. The
> problem is, I'm really not sure why I'd need them. I guess I don't fully
> understand their benefits. Can you fill me in??
>
> TIA
>
> -m
>
>
Yes, what Adam said. They give very clean holes, better than twist drills,
in sheetmetal. Handy things to have, even if you don't use them often.
"Adam Diehl" <[email protected]> wrote in message
news:[email protected]...
>
> Step drills are good for drilling sheet metal, tubing, etc. where you
> need to go through successively larger drill bit sizes to get a hole of
> a given size. Basically it saves you from having to change the drill bit
> half a dozen times to get one hole drilled. As for wood working, I'm
> not sure what you'd use it for.
>
> -AD
In article <WJpvd.2696$Sq.1751@fed1read01>, "Mike Pio" <[email protected]> wrote:
>My wife bought me an early x-mas gift -- a set of 3 step drill bits. The
>problem is, I'm really not sure why I'd need them. I guess I don't fully
>understand their benefits. Can you fill me in??
>
Countersinking wood screws is the first thing that spring to mind. One
diameter for the threaded portion of the screw, one for the unthreaded shank,
and one for the head.
--
Regards,
Doug Miller (alphageek-at-milmac-dot-com)
Get a copy of my NEW AND IMPROVED TrollFilter for NewsProxy/Nfilter
by sending email to autoresponder at filterinfo-at-milmac-dot-com
You must use your REAL email address to get a response.