Not long ago, I asked for some input on CAD. I received a lot of
really great leads and suggestions.
For a while, it looked like the Ashlar Vellum route was the way to go.
When ordering the particular version which piqued my interest, I was
asked if I was doing a 'competitive upgrade'.
I was told I needed the next- bigger (more expensive by $ 3000.00)
version if I wanted to be able to all those things that my current
software delivers.
I tried for a few weeks to like it.
Too damned much money for those few features.
The search continued.
I'm currently playing (oops, studying) GraphiteOneCAD running under
Linux on my Mac. (Using Parallels)
Other than the 99 bucks for Parallels, all free. No charge. Nada. Zip.
It's a bit clunky. Somewhat AutoCAD-like. It has a milling feature I
really like.
The search continues.
r
Robatoy wrote:
> On Dec 4, 11:31 pm, Mark & Juanita <[email protected]> wrote:
>> Robatoy wrote:
>> > GraphiteOneCAD
>>
>> Have you got a link to a site for that?
>>
>> Thanks
>>
>> --
> There ya go:
>
> http://www.graphiteone-cad.com/en/index.htm
Thanks!
--
If you're going to be dumb, you better be tough
Robatoy wrote:
> On Dec 4, 11:59 pm, Mark & Juanita <[email protected]> wrote:
>> Robatoy wrote:
>> > On Dec 4, 11:31 pm, Mark & Juanita <[email protected]> wrote:
>> >> Robatoy wrote:
>> >> > GraphiteOneCAD
>>
>> >> Have you got a link to a site for that?
>>
>> >> Thanks
>>
>> >> --
>> > There ya go:
>>
>> >http://www.graphiteone-cad.com/en/index.htm
>>
>> Thanks!
>>
> Yor velkomm
>
> PS...I had some trouble with running Python OSX (there are so many,
> and not all good ones), hence the Python/Linux
I'm running Linux, so this should be an easy go. Are you doing 3D?
--
If you're going to be dumb, you better be tough
On Dec 4, 11:59 pm, Mark & Juanita <[email protected]> wrote:
> Robatoy wrote:
> > On Dec 4, 11:31 pm, Mark & Juanita <[email protected]> wrote:
> >> Robatoy wrote:
> >> > GraphiteOneCAD
>
> >> Have you got a link to a site for that?
>
> >> Thanks
>
> >> --
> > There ya go:
>
> >http://www.graphiteone-cad.com/en/index.htm
>
> Thanks!
>
Yor velkomm
PS...I had some trouble with running Python OSX (there are so many,
and not all good ones), hence the Python/Linux
Tue, Dec 4, 2007, 8:18pm (EST-3) [email protected] (Robatoy) doth
sayeth:
Not long ago, I asked for some input on CAD. <snip of a bunch of stuff>
I've decided a router jig is needed to cut time on making two
pieces I use (so two jigs actually). I make the pieces by tacking
amaster patterns on ply, and routing out. I use small nails for this
because I've tried double-stick tape, and rubber cement, and they're
both a PITA to clean off. The nail holes either will be hidden, will be
painted over, will be filleld, or are in a place it won't matter, plus
using the nails is faster. I'll be plenty easy to cut pieces to size,
then hold them in place under the master pattern by pieces glued to the
edge of the master. To allow the stock to be inserted easily, and taken
out, one edge of each jig will be open, so I can apply pressure using my
thumbs. This will mean I want some piecs glued on top, to use to apply
pressure with my fingers, and to be sure I don't have a finger over a
side to get routed. I am very conscious of the safety of my body pats
around whirly parts. So, I promptly fired up my current version of CAD
(actually a pencil and paper). I sketched out a design. It'll work.
But how well I don't know. I'll still make the jigs, just not from the
designs I drew up. Instead I'll go out in the shop, cut small pieces,
and glue them to a master pattern, so I can adjust the finger holds as
needed. I'll also be putting a bridge, or cover, over the places to be
routed, so I can't put my fingers in place. I guess I'm just not a CAD
guy..
JOAT
Even Popeye didn't eat his spinach until he had to.
On Dec 4, 11:31 pm, Mark & Juanita <[email protected]> wrote:
> Robatoy wrote:
> > GraphiteOneCAD
>
> Have you got a link to a site for that?
>
> Thanks
>
> --
There ya go:
http://www.graphiteone-cad.com/en/index.htm
You may want to try TurboCad. www.turbocad.com They have a version for
the Mac. I have been using their PC version for a number of years and
really like it.
Skip
www.ShopFileR.com
"Robatoy" <[email protected]> wrote in message
news:c43cc2a1-95aa-463f-bf74-08876be04f95@a35g2000prf.googlegroups.com...
> Not long ago, I asked for some input on CAD. I received a lot of
> really great leads and suggestions.
> For a while, it looked like the Ashlar Vellum route was the way to go.
> When ordering the particular version which piqued my interest, I was
> asked if I was doing a 'competitive upgrade'.
> I was told I needed the next- bigger (more expensive by $ 3000.00)
> version if I wanted to be able to all those things that my current
> software delivers.
> I tried for a few weeks to like it.
> Too damned much money for those few features.
>
> The search continued.
>
> I'm currently playing (oops, studying) GraphiteOneCAD running under
> Linux on my Mac. (Using Parallels)
> Other than the 99 bucks for Parallels, all free. No charge. Nada. Zip.
>
> It's a bit clunky. Somewhat AutoCAD-like. It has a milling feature I
> really like.
>
> The search continues.
>
> r
J T wrote:
> Tue, Dec 4, 2007, 8:18pm (EST-3) [email protected] (Robatoy)
> doth sayeth:
> Not long ago, I asked for some input on CAD. <snip of a bunch of
> stuff>
>
> I've decided a router jig is needed to cut time on making two
> pieces I use (so two jigs actually). I make the pieces by tacking
> amaster patterns on ply, and routing out. I use small nails for
> this
> because I've tried double-stick tape, and rubber cement, and they're
> both a PITA to clean off. The nail holes either will be hidden,
> will
> be painted over, will be filleld, or are in a place it won't matter,
> plus using the nails is faster. I'll be plenty easy to cut pieces
> to
> size, then hold them in place under the master pattern by pieces
> glued to the edge of the master. To allow the stock to be inserted
> easily, and taken out, one edge of each jig will be open, so I can
> apply pressure using my thumbs. This will mean I want some piecs
> glued on top, to use to apply pressure with my fingers, and to be
> sure I don't have a finger over a side to get routed. I am very
> conscious of the safety of my body pats around whirly parts. So, I
> promptly fired up my current version of CAD (actually a pencil and
> paper). I sketched out a design. It'll work. But how well I don't
> know. I'll still make the jigs, just not from the designs I drew
> up.
> Instead I'll go out in the shop, cut small pieces, and glue them to
> a
> master pattern, so I can adjust the finger holds as needed. I'll
> also be putting a bridge, or cover, over the places to be routed, so
> I can't put my fingers in place. I guess I'm just not a CAD guy..
IIRC Robatoy has N/C machines to deal with. They need CAD. Even if
you draw it on paper you have to eventually convert it into a form
that can control the machine.
--
--
--John
to email, dial "usenet" and validate
(was jclarke at eye bee em dot net)