I currently own a 14" bandsaw that works great, but is tedious to
change the blade on. I've been toying with the idea of getting
a second and smaller saw. I'd use the 14" with 1/2" 3TPI blade and
then put something like a 1/8" 12-14TPI blade on the smaller saw
to do curves on the small pieces I typically work with.
So I'm looking around at some of the small saws (9-10" bench top
variety) from vendors like Ryobi, Delta and Rikon and it doesn't
look like any of them have a quick release feature.
So my question is this: Does anyone make a small/bench-top bandsaw
with a quick release?
NOTE: I'm not interested in getting a second 14" bandsaw or
larger--just a bench top style saw.
Thanks.
--
If you want to reply via email, change the obvious words to numbers and
remove ".invalid".
"Michael Faurot" <[email protected]> wrote in message
news:[email protected]...
>I currently own a 14" bandsaw that works great, but is tedious to
> change the blade on. I've been toying with the idea of getting
> a second and smaller saw. I'd use the 14" with 1/2" 3TPI blade and
> then put something like a 1/8" 12-14TPI blade on the smaller saw
> to do curves on the small pieces I typically work with.
>
> So I'm looking around at some of the small saws (9-10" bench top
> variety) from vendors like Ryobi, Delta and Rikon and it doesn't
> look like any of them have a quick release feature.
>
> So my question is this: Does anyone make a small/bench-top bandsaw
> with a quick release?
>
> NOTE: I'm not interested in getting a second 14" bandsaw or
> larger--just a bench top style saw.
>
> Thanks.
>
> --
>
> If you want to reply via email, change the obvious words to numbers and
> remove ".invalid".
Mark Duginske shows a small bandsaw in his video about mastering your
bandsaw that is contrary to the previous posts.
I would look at his video and see if it's something I would want to do.
Mark has in addition to his 14" bandsaw shows some 9" (IIRC) Sears saws and
I think he used one to cut tenons on.
A crank handle on a bandsaw works as well as quick release. You can make one
to fit any bs,
"Michael Faurot" <[email protected]> wrote in message
> That's what I'd like to avoid, having to crank a knob X number of
> times. When I bought my 14" saw, that was one of the key features
> I wanted and was willing to pay more to get. If there is an option
> for a quick release on a small saw, that's what I want. But if the
> cost difference is too much, I'll probably just learn to deal with
> cranking the knob.
Put a handle on it instead. Faster, easier. There is a commercial one made
but I don't recall the name of it.
Michael Faurot wrote:
> I currently own a 14" bandsaw that works great, but is tedious to
> change the blade on. I've been toying with the idea of getting
> a second and smaller saw. I'd use the 14" with 1/2" 3TPI blade and
> then put something like a 1/8" 12-14TPI blade on the smaller saw
> to do curves on the small pieces I typically work with.
>
> So I'm looking around at some of the small saws (9-10" bench top
> variety) from vendors like Ryobi, Delta and Rikon and it doesn't
> look like any of them have a quick release feature.
>
> So my question is this: Does anyone make a small/bench-top bandsaw
> with a quick release?
>
> NOTE: I'm not interested in getting a second 14" bandsaw or
> larger--just a bench top style saw.
>
> Thanks.
>
I have a Delta 14" which I use for resawring (3 tpi x 1/2" blade). I
also have a 1940ish vintage 12" with a 3/16 blade for finer stuff. No
quick release; I have to turn the tightener 10 times if I'm not going to
use it for a bit. Works fine.
toodles,
jo4hn
In article <[email protected]>, Larry
Blanchard <[email protected]> wrote:
> On Tue, 11 Dec 2007 14:18:47 -0600, Michael Faurot wrote:
>
> > So I'm looking around at some of the small saws (9-10" bench top
> > variety) from vendors like Ryobi, Delta and Rikon and it doesn't
> > look like any of them have a quick release feature.
>
> I have an early version of the Delta. In a word, don't.
>
> I'd suggest a good scroll saw.
>
> If you have your heart set on a small bandsaw, jet has a 12" that doesn't
> look too bad, but that's probably bigger than you want.
>
I have a Canwood 10" and recently bought a Delta 14". The 10" has a 1/8
blade on it, and the Delta is currently set up for resawing. It's a
good combination.
If I only had the Delta, though, I'd likely be looking at a scroll saw
rather than a smaller bandsaw.
--
Help improve usenet. Kill-file Google Groups.
http://improve-usenet.org/
> I've all ready got a scroll saw. For the type of stuff I'm interested
> in doing, I like a band saw better.
I used to have the 10" Ryobi ($199 model), and for cutting smaller
stock, it really wasn't too bad. I resawed a lot of 2" thick oak on
it, and as long as the stock was fairly short and it had a good blade,
it worked just fine for that and many other operations. It DOES have
a quick release for the blade, and the dust collection is pretty
good. The main reason I upgraded was resaw capacity, and that the
table mounts were kind of flimsy - ripping or resawing anything heavy
(over 3' long or so) would cause the table to flex quite a bit.
Doesn't happen on my 400lb Grizzly. I sold the Ryobi to a friend for
$100, but if I had had the space, I would have kept it. With a 1/4"
blade, it would be fine for cutting curves or making minor cuts on
smaller workpieces. I'd guess that at least half the cuts I make on
my current bandsaw could easily be done on the old Ryobi, and I'd
definitely use it if it were still around.
One other saw to consider is the 10" Craftsman, here: http://tinyurl.com/yqwsk2
. It looks VERY similar to the equivalent Rikon, but may be cheaper
on sale - I'm pretty sure I've seen this one down to $100 recently.
Sears' website is also showing their 9" model on sale for $99, but I
haven't taken a good look at that one.
Hope this helps, and let me know if you have any more questions,
Andy
jo4hn <[email protected]> wrote:
> I have a Delta 14" which I use for resawring (3 tpi x 1/2" blade). I
> also have a 1940ish vintage 12" with a 3/16 blade for finer stuff. No
> quick release; I have to turn the tightener 10 times if I'm not going to
> use it for a bit. Works fine.
That's what I'd like to avoid, having to crank a knob X number of
times. When I bought my 14" saw, that was one of the key features
I wanted and was willing to pay more to get. If there is an option
for a quick release on a small saw, that's what I want. But if the
cost difference is too much, I'll probably just learn to deal with
cranking the knob.
--
If you want to reply via email, change the obvious words to numbers and
remove ".invalid".
"J. Clarke" <[email protected]> wrote in message
news:[email protected]...
> Michael Faurot wrote:
>> I currently own a 14" bandsaw that works great, but is tedious to
>> change the blade on. I've been toying with the idea of getting
>> a second and smaller saw. I'd use the 14" with 1/2" 3TPI blade and
>> then put something like a 1/8" 12-14TPI blade on the smaller saw
>> to do curves on the small pieces I typically work with.
>>
>> So I'm looking around at some of the small saws (9-10" bench top
>> variety) from vendors like Ryobi, Delta and Rikon and it doesn't
>> look like any of them have a quick release feature.
>>
>> So my question is this: Does anyone make a small/bench-top bandsaw
>> with a quick release?
>>
>> NOTE: I'm not interested in getting a second 14" bandsaw or
>> larger--just a bench top style saw.
>
> If you're looking for a saw to cut curves on small pieces then why not
> get a scroll saw?
>
>
> --
> --
> --John
> to email, dial "usenet" and validate
> (was jclarke at eye bee em dot net)
I agree the small band saws are a pain.
>
>
> Interesting. That 10" model does look very similar to Rikon's 10"
> model 10-300. From looking at Rikon's manual, it doesn't appear
> to have a quick release nor does this Sears.
I know the QR is handy, but having used saws with and without them, I
wouldn't let that be a deciding factor. My current saw (Griz G1073)
doesn't have a QR; it has a knob on top that you twist. I wired on a
sort of extension lever with a little wheel on the end, so I can grab
the wheel and give it, say 6 spins and it's loose. Then when I need
to use it, tighten 6 turns and it's back to the same place it was.
Really not that much of an inconvenience. Send me an email if you
want a photo of my current jury-rigged (jerry-rigged?) setup.
Hope this helps,
Andy
Andy <[email protected]> wrote:
> I used to have the 10" Ryobi ($199 model), and for cutting smaller
> stock, it really wasn't too bad. I resawed a lot of 2" thick oak on
> it, and as long as the stock was fairly short and it had a good blade,
> it worked just fine for that and many other operations. It DOES have a
> quick release for the blade, and the dust collection is pretty good.
Cool! When I looked at Ryobi's site initially, I just looked at
their 9" saw. I saw the picture of the 10" saw, but seeing that
it came with a stand I thought it would be too big. But after
taking a closer look at the 10" model BS1001SV, it could be the
solution I'm looking for. Knowing it has the quick release is the
most important feature to me though and hearing that it has worked
reasonably well for you is helpful too.
> With a 1/4" blade, it would be fine for cutting curves or making minor
> cuts on smaller workpieces. I'd guess that at least half the cuts I
> make on my current bandsaw could easily be done on the old Ryobi, and
> I'd definitely use it if it were still around.
That's exactly what I'd want it for. Most of the peices will be 12"
or less and I won't be doing any resawing with it. All my reswaing
will be done on my 14" saw.
> One other saw to consider is the 10" Craftsman, here:
> http://tinyurl.com/yqwsk2 . It looks VERY similar to the equivalent
> Rikon, but may be cheaper on sale - I'm pretty sure I've seen this one
> down to $100 recently. Sears' website is also showing their 9" model
> on sale for $99, but I haven't taken a good look at that one. Hope
> this helps, and let me know if you have any more questions, Andy
Interesting. That 10" model does look very similar to Rikon's 10"
model 10-300. From looking at Rikon's manual, it doesn't appear
to have a quick release nor does this Sears. From looking at the
web page for the 9" Sears[1] it sounds like it does have a quick
release. But some of the reviews of the saw on Sears' site seem
to indicate the 9" model is a POS. I'll have to go to Sears though
and take a closer look at their small saws. The prices are definitely
in the range I'm looking for.
Thanks for the tips!
[1]: http://www.sears.com/shc/s/p_10153_12605_00921419000P?vName=Tools&keyword=band+saw
--
If you want to reply via email, change the obvious words to numbers and
remove ".invalid".
"Michael Faurot" <[email protected]> wrote in message
>
> So I'm looking around at some of the small saws (9-10" bench top
> variety) from vendors like Ryobi, Delta and Rikon and it doesn't
> look like any of them have a quick release feature.
It'll be a cute toy to play with but your real cutting will be done on a
real saw. IMO, the 9" are a waste of money.
Dave Balderstone <dave@n_o_t_t_h_i_sbalderstone.ca> wrote:
> I have a Canwood 10" and recently bought a Delta 14". The 10" has a 1/8
> blade on it, and the Delta is currently set up for resawing. It's a
> good combination.
Thanks for the info. That's exactly the same sort of configuration I'm
looking to set-up.
> If I only had the Delta, though, I'd likely be looking at a scroll saw
> rather than a smaller bandsaw.
I've all ready got a scroll saw, and I like using it for very small
and thin stock and where I need to cut something out from the inside.
I like the band saw more for pieces that have more straight lines
(e.g., cutting out a five pointed star). Given the price on the
9" and 10" band saws, they're inexpensive enough that I can afford
to get one of those and use it with my 14" band saw and the scroll
saw.
--
If you want to reply via email, change the obvious words to numbers and
remove ".invalid".
Michael Faurot wrote:
> I currently own a 14" bandsaw that works great, but is tedious to
> change the blade on. I've been toying with the idea of getting
> a second and smaller saw. I'd use the 14" with 1/2" 3TPI blade and
> then put something like a 1/8" 12-14TPI blade on the smaller saw
> to do curves on the small pieces I typically work with.
>
> So I'm looking around at some of the small saws (9-10" bench top
> variety) from vendors like Ryobi, Delta and Rikon and it doesn't
> look like any of them have a quick release feature.
>
> So my question is this: Does anyone make a small/bench-top bandsaw
> with a quick release?
>
> NOTE: I'm not interested in getting a second 14" bandsaw or
> larger--just a bench top style saw.
If you're looking for a saw to cut curves on small pieces then why not
get a scroll saw?
--
--
--John
to email, dial "usenet" and validate
(was jclarke at eye bee em dot net)
mac davis wrote:
> On Tue, 11 Dec 2007 14:18:47 -0600, "Michael Faurot"
> <[email protected]> wrote:
>
>> I currently own a 14" bandsaw that works great, but is tedious to
>> change the blade on. I've been toying with the idea of getting
>> a second and smaller saw. I'd use the 14" with 1/2" 3TPI blade and
>> then put something like a 1/8" 12-14TPI blade on the smaller saw
>> to do curves on the small pieces I typically work with.
>>
>> So I'm looking around at some of the small saws (9-10" bench top
>> variety) from vendors like Ryobi, Delta and Rikon and it doesn't
>> look like any of them have a quick release feature.
>>
>> So my question is this: Does anyone make a small/bench-top bandsaw
>> with a quick release?
>>
>> NOTE: I'm not interested in getting a second 14" bandsaw or
>> larger--just a bench top style saw.
>>
>> Thanks.
>
> Unless you need and have room for a 2nd band or scroll saw, you
> might
> consider adding an after market tensioner to your current saw..
>
> http://www.woodcraft.com/family.aspx?FamilyID=3932
Assuming his will take one. Most of the ones that resemble a Delta or
Jet will. The ones that resemble a Rikon won't.
--
--
--John
to email, dial "usenet" and validate
(was jclarke at eye bee em dot net)
On Tue, 11 Dec 2007 14:18:47 -0600, "Michael Faurot"
<[email protected]> wrote:
>I currently own a 14" bandsaw that works great, but is tedious to
>change the blade on. I've been toying with the idea of getting
>a second and smaller saw. I'd use the 14" with 1/2" 3TPI blade and
>then put something like a 1/8" 12-14TPI blade on the smaller saw
>to do curves on the small pieces I typically work with.
>
>So I'm looking around at some of the small saws (9-10" bench top
>variety) from vendors like Ryobi, Delta and Rikon and it doesn't
>look like any of them have a quick release feature.
>
>So my question is this: Does anyone make a small/bench-top bandsaw
>with a quick release?
>
>NOTE: I'm not interested in getting a second 14" bandsaw or
>larger--just a bench top style saw.
>
>Thanks.
Unless you need and have room for a 2nd band or scroll saw, you might consider
adding an after market tensioner to your current saw..
http://www.woodcraft.com/family.aspx?FamilyID=3932
mac
Please remove splinters before emailing
Andy <[email protected]> wrote:
> I know the QR is handy, but having used saws with and without them, I
> wouldn't let that be a deciding factor.
It is a deciding factor for me. Other than to get the initial
tension set, I'm not going to crank a handle or a knob--you
can't make me! :)
I got to looking more closely at the Ryobi bandsaws at the Ryobi
web site, and found they have their manuals available on line.
After looking at the manual for the 9" saw (model BS903), it does
have a quick release. From looking at the pictures of the BS903 on
their web site, they only show the saw from the front, so it's not
obvious it has a quick release. I'll have to go by a Home Depot and
look at it more closely, but this is looking like what I need for the
small/light-duty stuff.
Thanks.
--
If you want to reply via email, change the obvious words to numbers and
remove ".invalid".
On Thu, 13 Dec 2007 22:56:49 -0600, "Michael Faurot"
<[email protected]> wrote:
>Andy <[email protected]> wrote:
>
>> I know the QR is handy, but having used saws with and without them, I
>> wouldn't let that be a deciding factor.
>
>It is a deciding factor for me. Other than to get the initial
>tension set, I'm not going to crank a handle or a knob--you
>can't make me! :)
>
>I got to looking more closely at the Ryobi bandsaws at the Ryobi
>web site, and found they have their manuals available on line.
>After looking at the manual for the 9" saw (model BS903), it does
>have a quick release. From looking at the pictures of the BS903 on
>their web site, they only show the saw from the front, so it's not
>obvious it has a quick release. I'll have to go by a Home Depot and
>look at it more closely, but this is looking like what I need for the
>small/light-duty stuff.
>
>Thanks.
No problem... a small motor, a flex connector and a remote switch and you got
it. ;-}
mac
Please remove splinters before emailing
Michael Faurot wrote:
> I currently own a 14" bandsaw that works great, but is tedious to
> change the blade on. I've been toying with the idea of getting
> a second and smaller saw. I'd use the 14" with 1/2" 3TPI blade and
> then put something like a 1/8" 12-14TPI blade on the smaller saw
> to do curves on the small pieces I typically work with.
>
> So I'm looking around at some of the small saws (9-10" bench top
> variety) from vendors like Ryobi, Delta and Rikon and it doesn't
> look like any of them have a quick release feature.
>
> So my question is this: Does anyone make a small/bench-top bandsaw
> with a quick release?
>
> NOTE: I'm not interested in getting a second 14" bandsaw or
> larger--just a bench top style saw.
>
> Thanks.
>
When I got tired of fiddling with my small bandsaw I got a scroll saw.
It uses clamps to hold the blade. I had some 1/8 bandsaw blades and
cut them up to length with wire cutters and they worked fine in the
scroll saw. Good for cutting thicker wood. They were not as sharp as
new scroll saw blades, but I already had them so they were "free".
I also have a large bandsaw.
--
Gerald Ross
Cochran, GA
To err is human. To blame someone else
is politics.
J. Clarke <[email protected]> wrote:
> If you're looking for a saw to cut curves on small pieces then why not
> get a scroll saw?
I've all ready got a scroll saw. For the type of stuff I'm interested
in doing, I like a band saw better.
--
If you want to reply via email, change the obvious words to numbers and
remove ".invalid".
"J. Clarke" <[email protected]> wrote in message
news:[email protected]...
>
> Assuming his will take one. Most of the ones that resemble a Delta or
> Jet will. The ones that resemble a Rikon won't.
Then there would be no need as the Rikon has one to start with. ;~)
http://rikontools.com/productpage_10-325.htm
On Tue, 11 Dec 2007 14:18:47 -0600, Michael Faurot wrote:
> So I'm looking around at some of the small saws (9-10" bench top
> variety) from vendors like Ryobi, Delta and Rikon and it doesn't
> look like any of them have a quick release feature.
I have an early version of the Delta. In a word, don't.
I'd suggest a good scroll saw.
If you have your heart set on a small bandsaw, jet has a 12" that doesn't
look too bad, but that's probably bigger than you want.