GarageWoodworks wrote:
> Join me as I make a raised dog feeder in the most dramatic form
> possible.
> http://www.garagewoodworks.com/video.php?video=56
Great video Brian. Coupla questions...
How do you do all of those steps so damned fast? Man - you're good!
And...
How in the hell do you spray anything with your gun that close to your
workpiece? Damned dude - you must be good!
--
-Mike-
[email protected]
On 9/21/2012 10:44 PM, F Murtz wrote:
> GarageWoodworks wrote:
>> Join me as I make a raised dog feeder in the most dramatic form possible.
>>
>> http://www.garagewoodworks.com/video.php?video=56
>
>
> The url dont work, comes back "too many connections" every time I try
I had MySQL problems today. It's resolved now and should work for you.
On 9/19/2012 10:07 PM, Larry Jaques wrote:
> On Wed, 19 Sep 2012 18:08:31 -0500, Leon <lcb11211@swbelldotnet>
> wrote:
>
>> On 9/19/2012 5:46 PM, GarageWoodworks wrote:
>>> Join me as I make a raised dog feeder in the most dramatic form possible.
>>>
>>> http://www.garagewoodworks.com/video.php?video=56
>>
>> Take a look at this one Brian, I built this for our Great Dane pup
>> about 5 years ago. Adjustable to accommodate growth.
>>
>> I made if from melamine so that it would be easily cleaned and trimed
>> with red oak to seal the edges. It has held up very well.
>>
>> The holes on the sides are for dowel pins to slight through from one
>> side to the other. The table top sets on top of the front and back
>> dowel pins.
>>
>> http://www.flickr.com/photos/lcb11211/8004511442/lightbox/
>
> What will the yucking fuppies think of next?
> Ergonomics for dogs, huh? Sheesh!
She was 12" tall when we got her, now she is 36" at the shoulder. Large
dogs have a bloat problem when they have to bend down to eat and drink.
On 9/19/2012 5:46 PM, GarageWoodworks wrote:
> Join me as I make a raised dog feeder in the most dramatic form possible.
>
> http://www.garagewoodworks.com/video.php?video=56
Take a look at this one Brian, I built this for our Great Dane pup
about 5 years ago. Adjustable to accommodate growth.
I made if from melamine so that it would be easily cleaned and trimed
with red oak to seal the edges. It has held up very well.
The holes on the sides are for dowel pins to slight through from one
side to the other. The table top sets on top of the front and back
dowel pins.
http://www.flickr.com/photos/lcb11211/8004511442/lightbox/
In article <[email protected]>, [email protected]
says...
>
> Join me as I make a raised dog feeder in the most dramatic form possible.
>
> http://www.garagewoodworks.com/video.php?video=56
That was good. I like the cam clamp thingie you use with the scraper--
gotta make one of those. Never thought of using the eraser end of a
pencil as a mini-push-stick--that one might save me a finger one day.
Is the mortise jig you were using with the router your design? That
looked handy.
Thank you.
On 9/19/2012 5:46 PM, GarageWoodworks wrote:
> Join me as I make a raised dog feeder in the most dramatic form possible.
>
> http://www.garagewoodworks.com/video.php?video=56
Well done ... and you work fast! ;)
--
www.eWoodShop.com
Last update: 4/15/2010
KarlCaillouet@ (the obvious)
http://gplus.to/eWoodShop
"Larry Jaques" wrote in message
news:[email protected]...
On Wed, 19 Sep 2012 18:08:31 -0500, Leon <lcb11211@swbelldotnet>
wrote:
>On 9/19/2012 5:46 PM, GarageWoodworks wrote:
>> Join me as I make a raised dog feeder in the most dramatic form possible.
>>
>> http://www.garagewoodworks.com/video.php?video=56
>
>Take a look at this one Brian, I built this for our Great Dane pup
>about 5 years ago. Adjustable to accommodate growth.
>
>I made if from melamine so that it would be easily cleaned and trimed
>with red oak to seal the edges. It has held up very well.
>
>The holes on the sides are for dowel pins to slight through from one
>side to the other. The table top sets on top of the front and back
>dowel pins.
>
>http://www.flickr.com/photos/lcb11211/8004511442/lightbox/
What will the yucking fuppies think of next?
Ergonomics for dogs, huh? Sheesh!
I built one years ago for my cats. Not so they wouldn't have to bend down
but so the bowls wouldn't get flipped over. Four of them are pretty normal
and I don't have any problem with them. One though, is just a little shit.
He is a constant trouble maker. I could go on forever relating what that
little beast does. Flipping the bowls over is the mellow part.
On 9/19/2012 7:45 PM, Mike Marlow wrote:
> GarageWoodworks wrote:
>> Join me as I make a raised dog feeder in the most dramatic form
>> possible.
>> http://www.garagewoodworks.com/video.php?video=56
>
> Great video Brian. Coupla questions...
>
> How do you do all of those steps so damned fast? Man - you're good!
>
> And...
>
> How in the hell do you spray anything with your gun that close to your
> workpiece? Damned dude - you must be good!
I am.
>
On 9/19/2012 7:08 PM, Leon wrote:
> On 9/19/2012 5:46 PM, GarageWoodworks wrote:
>> Join me as I make a raised dog feeder in the most dramatic form possible.
>>
>> http://www.garagewoodworks.com/video.php?video=56
>
>
>
> Take a look at this one Brian, I built this for our Great Dane pup
> about 5 years ago. Adjustable to accommodate growth.
>
> I made if from melamine so that it would be easily cleaned and trimed
> with red oak to seal the edges. It has held up very well.
>
> The holes on the sides are for dowel pins to slight through from one
> side to the other. The table top sets on top of the front and back
> dowel pins.
>
> http://www.flickr.com/photos/lcb11211/8004511442/lightbox/
I've not seen an adjustable one. That's pretty nice.
F Murtz <[email protected]> wrote in
news:[email protected]:
> GarageWoodworks wrote:
>> Join me as I make a raised dog feeder in the most dramatic form
>> possible.
>>
>> http://www.garagewoodworks.com/video.php?video=56
>
>
> The url dont work, comes back "too many connections" every time I try
Worked fine for me when I tried it soon after Brian posted the link. And
it works fine right now 7:12AM Sat
--
Best regards
Han
email address is invalid
On 9/19/2012 8:47 PM, Swingman wrote:
> On 9/19/2012 5:46 PM, GarageWoodworks wrote:
>> Join me as I make a raised dog feeder in the most dramatic form possible.
>>
>> http://www.garagewoodworks.com/video.php?video=56
>
> Well done ... and you work fast! ;)
Thank you. It's extremely tiring working that fast. :)
On Wed, 19 Sep 2012 18:46:03 -0400, GarageWoodworks <[email protected]> wrote:
>Join me as I make a raised dog feeder in the most dramatic form possible.
>http://www.garagewoodworks.com/video.php?video=56
That's one pampered doggie. ~ Just as it should be...
On Wed, 19 Sep 2012 18:08:31 -0500, Leon <lcb11211@swbelldotnet>
wrote:
>On 9/19/2012 5:46 PM, GarageWoodworks wrote:
>> Join me as I make a raised dog feeder in the most dramatic form possible.
>>
>> http://www.garagewoodworks.com/video.php?video=56
>
>Take a look at this one Brian, I built this for our Great Dane pup
>about 5 years ago. Adjustable to accommodate growth.
>
>I made if from melamine so that it would be easily cleaned and trimed
>with red oak to seal the edges. It has held up very well.
>
>The holes on the sides are for dowel pins to slight through from one
>side to the other. The table top sets on top of the front and back
>dowel pins.
>
>http://www.flickr.com/photos/lcb11211/8004511442/lightbox/
What will the yucking fuppies think of next?
Ergonomics for dogs, huh? Sheesh!
--
The most decisive actions of our life - I mean those that are most
likely to decide the whole course of our future - are, more often
than not, unconsidered.
-- Andre Gide