This has come onto my short list of tools to invest in. My Ryobi BS50N
didn't make it to my house with the factory fence, and frankly I plan
to upgrade at some time in the future to a larger machine.
My bandsaw spent enought time in it's prior life to have created a
difference in table hight from one side of the blade access slot to the
other. Therefore when working with resawing, I have to often tilt the
wood fence, monkey around with clamps, etc. Therefore I'm very
interested in the Kreg fence that is supposed to allow one to tilt the
fence to parallel to the blade.
However, the photos on the Kreg site:
http://www.kregtool.com/products/pms/product.php?PRODUCT_ID=38
click photos link
do not show how the fence tilts, nor do the they actually SHOW it
tilted.
Would someone with the fence mind taking some photos of explaining how
it works?
thanks
Alan
"arw01" <[email protected]> wrote in message
news:[email protected]...
>
> My bandsaw spent enought time in it's prior life to have created a
> difference in table hight from one side of the blade access slot to the
> other. Therefore when working with resawing, I have to often tilt the
> wood fence, monkey around with clamps, etc. Therefore I'm very
> interested in the Kreg fence that is supposed to allow one to tilt the
> fence to parallel to the blade.
>
> thanks
> Alan
>
No comment on the Kreg, but will ask about your table problem - you do have
the table pin in place right? That is what holds the table halves in line.
--
********
Bill Pounds
http://www.billpounds.com
"arw01" <[email protected]> wrote in message
news:[email protected]...
> Would someone with the fence mind taking some photos of explaining how
> it works?
Alan,
The extensive photo gallery on the Kreg sight seems to show a lot of detail,
including illustrations of how the fence tilts and adjusts. Did you see the
link to it? Its got 14 different photos. It would be nice if all
manufacturers did this to show their products.
Bob