I'm embarrassed to ask, but I got some blood on a pine door that I was
installing (my chiseling technique needs refinement). Any tricks on getting
a smear of dried blood from a pine door? Rather than painting them, I want
to stain them (with something other than blood), so I'd like to remove the
blood stain if possible.
In article <[email protected]>, RKP51X
<[email protected]> wrote:
> >Any tricks on getting
> >a smear of dried blood from a pine door?
>
> Have you checked Roy Underhill's website?
> Roger Poplin dba [email protected]
But seriously... try hot 5% hydrogen peroxide. Heat it in a microwave
until it's hot but not boiling. Daub it on with a piece of cloth or
paper towel. Of course, test it on some inconspicuous spot first.
--
Vince Heuring To email, remove the Vince.
>Any tricks on getting
>a smear of dried blood from a pine door?
Have you checked Roy Underhill's website?
Roger Poplin dba [email protected]
I kinda like the look of bloodwood.
Wayne
P.S. If you have some bloody scrap, try some of the laundry preparation
stuff that us supposed to remove blood.
"Buck Turgidson" <[email protected]> wrote in message
news:PAi%c.283371$Oi.282015@fed1read04...
> I'm embarrassed to ask, but I got some blood on a pine door that I was
> installing (my chiseling technique needs refinement). Any tricks on
getting
> a smear of dried blood from a pine door? Rather than painting them, I
want
> to stain them (with something other than blood), so I'd like to remove the
> blood stain if possible.
>
>
In article <PAi%c.283371$Oi.282015@fed1read04>, "Buck Turgidson" <[email protected]> wrote:
>I'm embarrassed to ask, but I got some blood on a pine door that I was
>installing (my chiseling technique needs refinement). Any tricks on getting
>a smear of dried blood from a pine door? Rather than painting them, I want
>to stain them (with something other than blood), so I'd like to remove the
>blood stain if possible.
>
Hydrogen peroxide. The 3% stuff from the first-aid aisle in the drugstore will
do just fine. Don't use the stronger stuff (6% or more) that's used for
bleaching hair, as it may bleach the wood too.
The other 97% is water, so it will dampen the wood and raise the grain. Allow
the wood to dry thoroughly, then sand the spot lightly, before staining and
finishing.
One hand on the chisel. One hand on the mallet. Fingers are safe that way.
--
Regards,
Doug Miller (alphageek-at-milmac-dot-com)
Get a copy of my NEW AND IMPROVED TrollFilter for NewsProxy/Nfilter
by sending email to autoresponder at filterinfo-at-milmac-dot-com
You must use your REAL email address to get a response.
Vince Heuring <[email protected]> wrote in
news:180920041045509238%[email protected]:
>> >Any tricks on getting
>> >a smear of dried blood from a pine door?
>>
>> Have you checked Roy Underhill's website?
>> Roger Poplin dba [email protected]
>
> But seriously... try hot 5% hydrogen peroxide. Heat it in a microwave
> until it's hot but not boiling. Daub it on with a piece of cloth or
> paper towel. Of course, test it on some inconspicuous spot first.
>
But wouldn't the test logically require a new blood source? ;-)
Patriarch,
wondering just how far one should reasonably go to protect pine from
peroxide...
On Sat, 18 Sep 2004 16:54:40 GMT, patriarch
<<patriarch>[email protected]> wrote:
>Vince Heuring <[email protected]> wrote in
>news:180920041045509238%[email protected]:
>
>>> >Any tricks on getting
>>> >a smear of dried blood from a pine door?
>>>
>>> Have you checked Roy Underhill's website?
>>> Roger Poplin dba [email protected]
>>
>> But seriously... try hot 5% hydrogen peroxide. Heat it in a microwave
>> until it's hot but not boiling. Daub it on with a piece of cloth or
>> paper towel. Of course, test it on some inconspicuous spot first.
>>
>
>But wouldn't the test logically require a new blood source? ;-)
>
>Patriarch,
>wondering just how far one should reasonably go to protect pine from
>peroxide...
thanks.. one of those questions that pop into your mind but you hate
to ask.. lol
Mac
03 Tahoe Widelite 26GT Travel Trailer
replaced 1958 Hilite tent trailer
99 Dodge Ram QQ 2wd - 5.9L, auto, 3:55 gears
Have you tried using hydrogen peroxide on it? That's what I used on my shirt
to take it off to keep it from staining my clothes.
"Buck Turgidson" <[email protected]> wrote in message
news:PAi%c.283371$Oi.282015@fed1read04...
> I'm embarrassed to ask, but I got some blood on a pine door that I was
> installing (my chiseling technique needs refinement). Any tricks on
getting
> a smear of dried blood from a pine door? Rather than painting them, I
want
> to stain them (with something other than blood), so I'd like to remove the
> blood stain if possible.
>
>
On Tue, 7 Sep 2004 09:20:42 -0400, "Buck Turgidson"
<[email protected]> vaguely proposed a theory
......and in reply I say!:
remove ns from my header address to reply via email
You have to qualify for the most weird non-spam request....
appreciate your sense of humour and honesty
>I'm embarrassed to ask, but I got some blood on a pine door that I was
>installing (my chiseling technique needs refinement). Any tricks on getting
>a smear of dried blood from a pine door? Rather than painting them, I want
>to stain them (with something other than blood), so I'd like to remove the
>blood stain if possible.
>
*****************************************************
I know I am wrong about just about everything. So I
am not going to listen when I am told I am wrong about
the things I know I am right about.